EN 1652 Grade CuNi10Fe1Mn H100

Want to keep this datasheet? Save it now in your required format

Description

CuNi10Fe1Mn (CW352H) is comparable to CuNi10Fe1Mn, mat. no. 2.0872, acc. to DIN 17664 : 1983-12. To the comparable DIN-mark applies: The material shows favorable specific strength values also at endurance loading and increased temperatures. Thermal conductivity of pure copper is strongly reduced by Ni, the electrical resistance strongly increases according to the Ni-content. Fe-addition increases the corrosion resistance. CuNi10Fe1Mn is resistant to seawater, alkaline saline solutions and non-oxidizing acids. warm forming: good cold forming: very good machinability: unfavorable hard soldering: very good soft soldering: very good gas-shielded welding: very good burnishing: good Application: For seawater pipilines, tubes and plates for all types of tubular heat-exchanger (condenser, cooler, seawater evaporators, high pressure feeder water heater) on ships, in power plants, seawater desalination plants, chemical and sugar factories.

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value
Dichte	20.0 °C	8.9 g/cm³ Show Material materials with Dichte of 8.9 g/cm³

Mechanisch

Property	Temperature	Value	Comment
Elastizitätsmodul	23.0 °C	120 - 156 GPa Show Material materials with Elastizitätsmodul of 120 - 156 GPa	Typical for Wrought Copper Nickel Grade
Härte, Brinell	20.0 °C	100 [-] Show Material materials with Härte, Brinell of 100 [-]
Härte, Vickers	20.0 °C	100 - 105 [-] Show Material materials with Härte, Vickers of 100 - 105 [-]

Thermisch

Property	Temperature	Value	Comment
Koeffizient der thermischen Ausdehnung	23.0 °C	1.4E-5 - 1.8E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.4E-5 - 1.8E-5 1/K	Typical for Wrought Copper Nickel Grade
Schmelzpunkt		915 - 1240 °C Show Material materials with Schmelzpunkt of 915 - 1240 °C	Typical for Wrought Copper Nickel Grade
Spezifische Wärmekapazität	20.0 °C	380 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 380 J/(kg·K)
Wärmeleitfähigkeit	20.0 °C	50.2 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 50.2 W/(m·K)

Chemical properties

Property	Value
Blei	0.02 % Show Material materials with Blei of 0.02 %
Eisen	1 - 2 % Show Material materials with Eisen of 1 - 2 %
Kobalt	0.1 % Show Material materials with Kobalt of 0.1 %
Kohlenstoff	0.05 % Show Material materials with Kohlenstoff of 0.05 %
Mangan	0.5 - 1 % Show Material materials with Mangan of 0.5 - 1 %
Nickel	9 - 11 % Show Material materials with Nickel of 9 - 11 %
Phosphor	0.02 % Show Material materials with Phosphor of 0.02 %
Schwefel	0.05 % Show Material materials with Schwefel of 0.05 %
Zink	0.5 % Show Material materials with Zink of 0.5 %
Zinn	0.03 % Show Material materials with Zinn of 0.03 %

Looking for suppliers of this material? Click to see 4 supplier of EN 1652 Grade CuNi10Fe1Mn H100 on Matmatch

EN 1652 Grade CuNi10Fe1Mn H100

Description

Related Standards

Equivalent Materials

Ashby charts

There is 1 other supplier for this grade.

Preview all suppliers

Empfohlene Literatur

Eigenschaften