Tungsten-Copper Composite (W20Cu)

Want to keep this datasheet? Save it now in your required format

Description

WCu composites consist of a porous tungsten matrix infiltrated with approximately 10 - 40 percent by weight of copper. Tungsten-Copper is very resistant to arc erosion, exhibits good electrical conductivity, a high level of thermal conductivity and low thermal expansion.

Diese Materialdaten wurden von Plansee zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

Eigenschaften

Allgemein

PropertyTemperatureValue

Dichte

23.0 °C

15.5 g/cm³

Show Supplier Material materials with Dichte of 15.5 g/cm³

Thermisch

PropertyTemperatureValue

Koeffizient der thermischen Ausdehnung

22.0 °C

8.3E-6 1/K

Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 8.3E-6 1/K

Wärmeleitfähigkeit

23.0 °C

235 W/(m·K)

Show Supplier Material materials with Wärmeleitfähigkeit of 235 W/(m·K)

Chemical properties

PropertyValue

Kupfer

balance

Wolfram

20 %

Show Supplier Material materials with Wolfram of 20 %

Technological properties

Property
Application areas

WCu is used for the construction of high-voltage circuit breakers (marketed under the name Elmet®) and for erosion electrodes (marketed under the name Sparkal®). WCu composites are also used as base plates and heat spreaders in radar technology, optoelectronics and high frequency electronics.