Kynar Flex® 2800-00

Nombres alternativos y comerciales
PVDF

Want to keep this datasheet? Save it now in your required format

Description

Kynar Flex® resins are fluorinated thermoplastic copolymers.

Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties.

Kynar Flex® 2800-00 resin is a standard grade of granules, compared to the homopolymer grades, which exhibits a lower modulus, a better resistance to stress cracking in alkaline and oxidizing media, and a lower melting point. For cable coating, extrusion of tube and plaque, compression molding of bulky parts.

Additional characteristics:

Easily processed using conventional equipment

Excellent thermal stability

Retains properties after aging

Pigmentable

UL RTI temperature rating 125ºC

Radiation crosslinking

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Testing Standard	Condition	Comment
Absorción de agua	0.03 % Show Supplier Material materials with Absorción de agua of 0.03 %	Sim. to ISO 62
	0.03 - 0.05 % Show Supplier Material materials with Absorción de agua of 0.03 - 0.05 %	ASTM D570
Coefficient of friction	0.33 [-] Show Supplier Material materials with Coefficient of friction of 0.33 [-]	ASTM D1894		vs Steel, Static
	0.33 [-] Show Supplier Material materials with Coefficient of friction of 0.33 [-]	ASTM D1894		vs Steel, Kinetic
Densidad	1.77 - 1.8 g/cm³ Show Supplier Material materials with Densidad of 1.77 - 1.8 g/cm³	ASTM D792
	1.78 g/cm³ Show Supplier Material materials with Densidad of 1.78 g/cm³	ISO 1183	dry
Moisture absorption	0.015 % Show Supplier Material materials with Moisture absorption of 0.015 %	Sim. to ISO 62
Índice límite de óxigeno	42 % Show Supplier Material materials with Índice límite de óxigeno of 42 %	ASTM D2863
	43 % Show Supplier Material materials with Índice límite de óxigeno of 43 %	ISO 4589-1/-2	dry

Mecánica

Property	Temperature	Value	Testing Standard	Condition	Comment
Dureza Shore D		60 - 70 [-] Show Supplier Material materials with Dureza Shore D of 60 - 70 [-]	ASTM D2240
Elongación		50 % Show Supplier Material materials with Elongación of 50 %	ISO 527-1/-2	dry	min. \| nominal
		100 - 300 % Show Supplier Material materials with Elongación of 100 - 300 %	ASTM D638
Elongation at yield		10 - 20 % Show Supplier Material materials with Elongation at yield of 10 - 20 %	ASTM D638
		15 % Show Supplier Material materials with Elongation at yield of 15 %	ISO 527-1/-2	dry
Impact strength, Charpy notched, ASTM	23 °C	534 - 1070 J/m Show Supplier Material materials with Impact strength, Charpy notched, ASTM of 534 - 1070 J/m	ASTM D256
Impact strength, Charpy unnotched, ASTM		No Break at 23°C	ASTM D256
Límite elástico		20 - 34.5 MPa Show Supplier Material materials with Límite elástico of 20 - 34.5 MPa	ASTM D638
		27 MPa Show Supplier Material materials with Límite elástico of 27 MPa	ISO 527-1/-2	dry
Módulo de flexión		0.483 - 0.758 GPa Show Supplier Material materials with Módulo de flexión of 0.483 - 0.758 GPa	ASTM D790
Módulo elástico		0.552 - 0.896 GPa Show Supplier Material materials with Módulo elástico of 0.552 - 0.896 GPa	ASTM D638
		0.7 GPa Show Supplier Material materials with Módulo elástico of 0.7 GPa	ISO 527-1/-2	dry
Resistencia a la compresión		31 - 41.4 MPa Show Supplier Material materials with Resistencia a la compresión of 31 - 41.4 MPa	ASTM D695
Resistencia a la flexión		20.7 - 34.5 MPa Show Supplier Material materials with Resistencia a la flexión of 20.7 - 34.5 MPa	ASTM D790		at 5% strain
Resistencia a la tracción		17.2 - 34.5 MPa Show Supplier Material materials with Resistencia a la tracción of 17.2 - 34.5 MPa	ASTM D638
Resistencia al choque, ensayo Charpy entallado	-30 °C	5 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 5 kJ/m²	ISO 179/1eA	dry	No Break at 23°C

Aplicaciones térmicas

Property	Value	Testing Standard	Condition	Pressure	Comment
Calor específico	745 - 958 J/(kg·K) Show Supplier Material materials with Calor específico of 745 - 958 J/(kg·K)	DSC
Coeficiente de dilatación térmica	0.000126 - 0.000185 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 0.000126 - 0.000185 1/K	ASTM D696
	0.00016 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 0.00016 1/K	ISO 11359-1/-2	dry
Conductividad térmica	0.144 - 0.18 W/(m·K) Show Supplier Material materials with Conductividad térmica of 0.144 - 0.18 W/(m·K)	ASTM D433
Relative temperature index, electrical	130 °C Show Supplier Material materials with Relative temperature index, electrical of 130 °C	UL 746B
Relative temperature index, mechanical strength	130 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 130 °C	UL 746B
Temperatura de flexión bajo carga	40 - 55 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 40 - 55 °C	ASTM D648		2 MPa	248 °F/hr
	48 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 48 °C	ISO 75-1/-2	dry	2 MPa
	60 - 75 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 60 - 75 °C	ASTM D648		0.45 MPa	248 °F/hr
	68 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 68 °C	ISO 75-1/-2	dry	0.45 MPa
Temperatura de fusión	140 - 145 °C Show Supplier Material materials with Temperatura de fusión of 140 - 145 °C	ASTM D3418
	143 °C Show Supplier Material materials with Temperatura de fusión of 143 °C	ISO 11357-1/-3	dry		10°C/min
Temperatura de reblandecimiento Vicat	79 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 79 °C	ISO 306			50°C/h 50N
Temperatura de transición del vidrio	-41.1 - -39.4 °C Show Supplier Material materials with Temperatura de transición del vidrio of -41.1 - -39.4 °C	ASTM D7028
	-40 °C Show Supplier Material materials with Temperatura de transición del vidrio of -40 °C	ISO 11357-1/-2	dry		10°C/min
Thermal decomposition in air	375 °C Show Supplier Material materials with Thermal decomposition in air of 375 °C	TGA			1% wt. loss
Thermal decomposition in nitrogen	410 °C Show Supplier Material materials with Thermal decomposition in nitrogen of 410 °C	TGA			1% wt. loss
Inflamabilidad	At thickness 1.5 mm IEC 60695-11-10: V-0, At thickness 0.8 mm IEC 60695-11-10: V-0 and yellow card available

Eléctrico

Property	Value	Frequency	Testing Standard	Condition
Constante dieléctrica	3.5 - 10.6 [-] Show Supplier Material materials with Constante dieléctrica of 3.5 - 10.6 [-]	1KHz	ASTM D150
	7 [-] Show Supplier Material materials with Constante dieléctrica of 7 [-]	1MHz	IEC 60250	dry
	11 [-] Show Supplier Material materials with Constante dieléctrica of 11 [-]	100Hz	IEC 60250	dry
Factor de disipación	0.02 - 0.21 [-] Show Supplier Material materials with Factor de disipación of 0.02 - 0.21 [-]	100KHz	ASTM D150
	0.052 [-] Show Supplier Material materials with Factor de disipación of 0.052 [-]	100Hz	IEC 60250	dry
	0.233 [-] Show Supplier Material materials with Factor de disipación of 0.233 [-]	1MHz	IEC 60250	dry
Rigidez dieléctrica	51.2 - 59.1 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 51.2 - 59.1 kV/mm		ASTM D149
Surface resistivity	5.1e+11 - 5.3e+11 Ω/sq Show Supplier Material materials with Surface resistivity of 5.1e+11 - 5.3e+11 Ω/sq		ASTM D257
Volume resistivity	2e+14 Ω·cm Show Supplier Material materials with Volume resistivity of 2e+14 Ω·cm		ASTM D257	65% RH
	2e+14 Ω·cm Show Supplier Material materials with Volume resistivity of 2e+14 Ω·cm		IEC 60093	dry

Óptico

Property	Value	Testing Standard	Comment
Índice de refracción	1 [-] Show Supplier Material materials with Índice de refracción of 1 [-]	ASTM D542	sodium D line

Rheological Properties

Property	Value	Testing Standard	Condition	Comment
Melt viscosity	2700 - 220000 Pa·s Show Supplier Material materials with Melt viscosity of 2700 - 220000 Pa·s	ASTM D3835
Velocidad de flujo de la masa derretida	3 - 8 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 3 - 8 g/10min	ASTM D1238		230°C/12.5kg
Velocidad de flujo del volumen derretido	0.5 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 0.5 cm³/10min	ISO 1133	dry	230°C/5kg

Technological properties

Property

Application areas

Fuel Management - Fuel Lines,Fuel Management - In-Tank and Fuel Venting Lines,Chemical Process Industry,Chemical Process Industry - Injection Molding,Chemical Process Industry - Stock Shapes,Tubing and Hoses,Automotive Cables,Performance Wire,PVDF Cable Jacketing,Wire and Cables,Offshore Umbilicals,Underground Fuel Containment

Processing methods

Compression Molding:

Molding temperature (°C) ISO 293: 225

Molding time (min) ISO 293: 3

DeMolding temperature (°C) ISO 293: 120

Kynar Flex® 2800-00

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades