Propiedades
General
| Property | Value | Condition | Testing Standard |
|---|---|---|---|
Abrasion resistance | 55 mm³ Show Supplier Material materials with Abrasion resistance of 55 mm³ | dry | ISO 4649 |
Absorción de agua | 1.1 % Show Supplier Material materials with Absorción de agua of 1.1 % | Sim. to ISO 62 | |
Densidad | 1.01 g/cm³ Show Supplier Material materials with Densidad of 1.01 g/cm³ | dry | ISO 1183 |
Moisture absorption | 0.7 % Show Supplier Material materials with Moisture absorption of 0.7 % | Sim. to ISO 62 | |
Índice límite de óxigeno | 20 % Show Supplier Material materials with Índice límite de óxigeno of 20 % | dry | ISO 4589-1/-2 |
Mecánica
| Property | Value | Condition | Testing Standard | Comment |
|---|---|---|---|---|
Dureza Shore D | 58 [-] Show Supplier Material materials with Dureza Shore D of 58 [-] | dry | ISO 7619-1 | 15 seconds |
Elongación | 50 % Show Supplier Material materials with Elongación of 50 % | cond., dry | ISO 527-1/-2 | min. | nominal |
Elongation at yield | 22 % Show Supplier Material materials with Elongation at yield of 22 % | cond., dry | ISO 527-1/-2 | |
Límite elástico | 22 MPa Show Supplier Material materials with Límite elástico of 22 MPa | cond. | ISO 527-1/-2 | |
23 MPa Show Supplier Material materials with Límite elástico of 23 MPa | dry | ISO 527-1/-2 | ||
Módulo elástico | 0.285 GPa Show Supplier Material materials with Módulo elástico of 0.285 GPa | cond. | ISO 527-1/-2 | |
0.307 GPa Show Supplier Material materials with Módulo elástico of 0.307 GPa | dry | ISO 527-1/-2 | ||
Resistencia a desgarros | 127 kN/m Show Supplier Material materials with Resistencia a desgarros of 127 kN/m | ISO 34-1 | ||
Resistencia al choque, ensayo Charpy entallado | No Break at 23°C | cond., dry | ISO 179/1eA | |
Resistencia al choque, ensayo Charpy no entallado | No Break at 23 and -30°C | dry and cond. | ISO 179/1eU | |
Set de compresión | 47 [-] Show Supplier Material materials with Set de compresión of 47 [-] | ISO 815 | for 24h |
Aplicaciones térmicas
| Property | Value | Condition | Testing Standard | Comment | |||
|---|---|---|---|---|---|---|---|
Coeficiente de dilatación térmica | 0.00014 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 0.00014 1/K | dry | ISO 11359-1/-2 | ||||
Temperatura de fusión | 169 °C Show Supplier Material materials with Temperatura de fusión of 169 °C | dry | ISO 11357-1/-3 | 10°C/min | |||
Temperatura de reblandecimiento Vicat | 157 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 157 °C | ISO 306 | 50°C/h 50N | ||||
Inflamabilidad | At thickness 1.6 mm IEC 60695-11-10: HB and yellow card available | ||||||
Eléctrico
| Property | Value | Condition | Frequency | Testing Standard |
|---|---|---|---|---|
Constante dieléctrica | 4 [-] Show Supplier Material materials with Constante dieléctrica of 4 [-] | dry | 1MHz | IEC 60250 |
9 [-] Show Supplier Material materials with Constante dieléctrica of 9 [-] | dry | 100Hz | IEC 60250 | |
Factor de disipación | 0.0757 [-] Show Supplier Material materials with Factor de disipación of 0.0757 [-] | dry | 1MHz | IEC 60250 |
0.144 [-] Show Supplier Material materials with Factor de disipación of 0.144 [-] | dry | 100Hz | IEC 60250 | |
Rigidez dieléctrica | 42.5 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 42.5 kV/mm | dry | IEC 60243-1 | |
Surface resistivity | 1e+13 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+13 Ω/sq | cond. | IEC 60093 | |
Volume resistivity | 9e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 9e+13 Ω·cm | dry | IEC 60093 | |
Índice de seguimiento comparativo | 600 V Show Supplier Material materials with Índice de seguimiento comparativo of 600 V | cond. | IEC 60112 |
Rheological Properties
| Property | Value | Condition | Testing Standard | Comment |
|---|---|---|---|---|
Contracción | 1.2 % Show Supplier Material materials with Contracción of 1.2 % | dry | ISO 294-4 | |
1.4 % Show Supplier Material materials with Contracción of 1.4 % | dry | ISO 294-4 | Transverse | |
Density of melt | 0.83 g/cm³ Show Supplier Material materials with Density of melt of 0.83 g/cm³ | |||
Specific heat capacity melt | 2800 J/(kg·K) Show Supplier Material materials with Specific heat capacity melt of 2800 J/(kg·K) | |||
Thermal conductivity of melt | 0.18 W/(m·K) Show Supplier Material materials with Thermal conductivity of melt of 0.18 W/(m·K) |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Conveyor Belts and Pulleys,Pneumatic Tubing,Tubing and Hoses,Hook and Loop Fasteners,Footwear - Outsoles,Ski Boots,Sports Equipment | |
| Certifications | Yellow Card | |
| Processing methods | Injection Molding: Extrusion: | |