Pebax® 7033 SA 01

Nombres alternativos y comerciales
TPA

Want to keep this datasheet? Save it now in your required format

Description

Polyether block amide Pebax® 7033 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade is suitable for food contact applications.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Testing Standard	Condition
Absorción de agua	0.7 % Show Supplier Material materials with Absorción de agua of 0.7 %	Sim. to ISO 62
Densidad	1.01 g/cm³ Show Supplier Material materials with Densidad of 1.01 g/cm³	ISO 1183	dry
Moisture absorption	1.1 % Show Supplier Material materials with Moisture absorption of 1.1 %	Sim. to ISO 62

Mecánica

Property	Temperature	Value	Condition	Testing Standard	Comment
Dureza Shore D		61 [-] Show Supplier Material materials with Dureza Shore D of 61 [-]	dry	ISO 7619-1	15 seconds
Elongación		50 % Show Supplier Material materials with Elongación of 50 %	cond., dry	ISO 527-1/-2	min. \| nominal
Elongation at yield		20 % Show Supplier Material materials with Elongation at yield of 20 %	cond.	ISO 527-1/-2
		22 % Show Supplier Material materials with Elongation at yield of 22 %	dry	ISO 527-1/-2
Límite elástico		22 MPa Show Supplier Material materials with Límite elástico of 22 MPa	cond.	ISO 527-1/-2
		23 MPa Show Supplier Material materials with Límite elástico of 23 MPa	dry	ISO 527-1/-2
Módulo elástico		0.39 GPa Show Supplier Material materials with Módulo elástico of 0.39 GPa	cond.	ISO 527-1/-2
		0.414 GPa Show Supplier Material materials with Módulo elástico of 0.414 GPa	dry	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-30 °C	20 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 20 kJ/m²	cond.	ISO 179/1eA
	23 °C	120 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 120 kJ/m²	cond.	ISO 179/1eA
Resistencia al choque, ensayo Charpy no entallado		No Break at 23 and -30°C	cond.	ISO 179/1eU

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Comment
Temperatura de fusión	172 °C Show Supplier Material materials with Temperatura de fusión of 172 °C	dry	ISO 11357-1/-3	10°C/min
Temperatura de reblandecimiento Vicat	164 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 164 °C		ISO 306	50°C/h 50N

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	1.2 % Show Supplier Material materials with Contracción of 1.2 %	dry	ISO 294-4
	1.5 % Show Supplier Material materials with Contracción of 1.5 %	dry	ISO 294-4	Transverse

Technological properties

Property

Application areas

Main applications:

Athletic foot wear components

Food tubing

Note: this grade is not recommended by Arkema for usage in medical applications. For such applications Pebax® SA 01 MED should be used

Packaging: This grade is delivered dried in sealed packaging (20 or 25 kg bags) ready to be processed.

Shelf life: Two years from the delivery. For any use above this limit, please refer to our technical services.

Certifications

Food Contact

Processing methods

Injection Molding:

Typical melt temperature (Min / Recommended / Max) : 230°C / 260°C / 290°C.

Typical mold temperature : 25 – 60°C.

Drying time and temperature (only necessary for bags opened for more than two hours) : 5-7 hours at 70-80°C.

Extrusion:

Typical melt temperature (Min / Recommended / Max) : 220°C / 235°C / 250°C.

Drying time and temperature (only necessary for bags opened for more than two hours) : 5-7 hours at 70-80°C.

Pebax® 7033 SA 01

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades