Rilsan® HT CESV BLACK P010 TL

Nombres alternativos y comerciales
PA*-I

Want to keep this datasheet? Save it now in your required format

Description

PA11/10T-I,,EHL,C16-010

is a flexible polyphthalamide produced from a renewable source, typical used to replace metal in tubing for high-temperature automotive, transportation and other demanding technical applications. Percentage of renewable carbon according to ASTM D6866: 45 %.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard
Bio-based content	45 % Show Supplier Material materials with Bio-based content of 45 %
Densidad	1.05 g/cm³ Show Supplier Material materials with Densidad of 1.05 g/cm³	dry	ISO 1183

Mecánica

Property	Temperature	Value	Condition	Testing Standard	Comment
Dureza Shore D		66 [-] Show Supplier Material materials with Dureza Shore D of 66 [-]	dry	ISO 7619-1	15 seconds
Elongación		50 % Show Supplier Material materials with Elongación of 50 %	cond.	ISO 527-1/-2	min. \| nominal
Elongation at yield		5 % Show Supplier Material materials with Elongation at yield of 5 %	cond.	ISO 527-1/-2
Límite elástico		64 MPa Show Supplier Material materials with Límite elástico of 64 MPa	cond.	ISO 527-1/-2
Módulo elástico		1.0 GPa Show Supplier Material materials with Módulo elástico of 1.0 GPa	cond.	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-30 °C	16 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 16 kJ/m²	cond.	ISO 179/1eA
	23 °C	84 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 84 kJ/m²	cond.	ISO 179/1eA
Resistencia al choque, ensayo Charpy no entallado		No Break at 23 and -30°C	cond.	ISO 179/1eU

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Comment
Temperatura de fusión	260 °C Show Supplier Material materials with Temperatura de fusión of 260 °C	dry	ISO 11357-1/-3	10°C/min
Temperatura de transición del vidrio	82 °C Show Supplier Material materials with Temperatura de transición del vidrio of 82 °C	dry	ISO 11357-1/-2	10°C/min

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Velocidad de flujo del volumen derretido	1.9 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 1.9 cm³/10min	dry	ISO 1133	300°C/5kg

Technological properties

Property

Application areas

Auto - Water Cooling Circuit,Emission Control Systems - Air Conditioning Circuit,Emission Control Systems - Vacuum and Blow by Lines,Fluid Management - Brakebooster Lines,Fluid Management - Transmission oil Cooling Circuit

Processing methods

Profile Extrusion:

Typical melt temperature (Min / Recommended / Max) : 270°C / 280°C / 290°C.** **

Drying time and temperature (only for bags opened for more than two hours) : 8 - 12 hours at 70 °C.

Rilsan® HT CESV BLACK P010 TL

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades