Printdur® Ni625 LFe

Nombres alternativos y comerciales
2.4856, Alloy 625

Want to keep this datasheet? Save it now in your required format

Description

2.4856 (Alloy 625) used for applications that require outstanding corrosion resistance, the use of our nickel-based metal powders is recommended. With Printdur® Ni625LFe (~2.4856) we are expanding our portfolio of corrosion resistant materials for 3D printing.

Printdur® Ni625LFe has good resistance to mineral acids such as nitric, phosphoric, sulfuric or hydrochloric acid. In addition, it is also corrosion resistant to alkalis and organic acids. Furthermore, the material has a good resistance to hot gas corrosion in the solution heat treated condition and a high creep rupture strength above 600°C.

In comparison to Printdur® Ni625, the iron content of Printdur® Ni625 LFe is significantly lower. This leads to a cleaner material with even better corrosion and oxidation properties.

Equivalent Materials

DIN 2.4856

Los datos sobre este material han sido proporcionados por Deutsche Edelstahlwerke Specialty Steel (DEW).

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Value
Densidad aparente	3.8 - 4.6 g/cm³ Show Supplier Material materials with Densidad aparente of 3.8 - 4.6 g/cm³
Rango de tamaño de partículas	20 - 53 µm Show Supplier Material materials with Rango de tamaño de partículas of 20 - 53 µm

Mecánica

Property	Value	Comment
Charpy impact energy, V-notch	100 J Show Supplier Material materials with Charpy impact energy, V-notch of 100 J
Elongación	35 % Show Supplier Material materials with Elongación of 35 %	A5
Límite elástico	660 - 760 MPa Show Supplier Material materials with Límite elástico of 660 - 760 MPa	RP02
Resistencia a la tracción	920 - 1030 MPa Show Supplier Material materials with Resistencia a la tracción of 920 - 1030 MPa

Magnético

Property	Value	Comment
Permeabilidad magnética relativa	1 [-] Show Supplier Material materials with Permeabilidad magnética relativa of 1 [-]	max. \| None magnetic

Rheological Properties

Property	Value
Flujo de Hall	12 - 20 s/50g Show Supplier Material materials with Flujo de Hall of 12 - 20 s/50g

Chemical properties

Property	Value
Carbono	0.03 % Show Supplier Material materials with Carbono of 0.03 %
Cobalto	0.5 % Show Supplier Material materials with Cobalto of 0.5 %
Cromo	22 % Show Supplier Material materials with Cromo of 22 %
Hierro	0.5 % Show Supplier Material materials with Hierro of 0.5 %
Manganeso	0.5 % Show Supplier Material materials with Manganeso of 0.5 %
Molibdeno	9 % Show Supplier Material materials with Molibdeno of 9 %
Niobio	3.5 % Show Supplier Material materials with Niobio of 3.5 %
Níquel	Balance
Silicona	0.5 % Show Supplier Material materials with Silicona of 0.5 %

Technological properties

Property

Application areas

Additive manufacturing

Processing history

The powder is produced by gas atomization.

Processing methods

Printdur® Ni625LFe can be processed on LPBF systems. The process parameters are similar to those of alloy 625. Please contact us for further information.

Printdur® Ni625 LFe

Description

Equivalent Materials

Ashby charts

Usos

Materiales de este proveedor

Casos de uso

Propiedades