Propiedades
General
| Property | Value |
|---|---|
Densidad | 6.5 g/cm³ Show Supplier Material materials with Densidad of 6.5 g/cm³ |
Estructura de grano | Titanium carbide + martensite |
Mecánica
| Property | Value |
|---|---|
Dureza Rockwell C | 69 [-] Show Supplier Material materials with Dureza Rockwell C of 69 [-] |
Módulo de cizallamiento | 117 GPa Show Supplier Material materials with Módulo de cizallamiento of 117 GPa |
Módulo elástico | 292 GPa Show Supplier Material materials with Módulo elástico of 292 GPa |
Resistencia a la compresión | 3800 MPa Show Supplier Material materials with Resistencia a la compresión of 3800 MPa |
Resistencia a la flexión | 1500 MPa Show Supplier Material materials with Resistencia a la flexión of 1500 MPa |
Aplicaciones térmicas
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coeficiente de dilatación térmica | 100 °C | 9.2e-06 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 9.2e-06 1/K | for 20°C to the mentioned temperature |
200 °C | 9.1e-06 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 9.1e-06 1/K | for 20°C to the mentioned temperature | |
300 °C | 9.8e-06 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 9.8e-06 1/K | for 20°C to the mentioned temperature | |
Conductividad térmica | 20.5 W/(m·K) Show Supplier Material materials with Conductividad térmica of 20.5 W/(m·K) |
Eléctrico
| Property | Value |
|---|---|
Resistividad eléctrica | 7.5e-07 Ω·m Show Supplier Material materials with Resistividad eléctrica of 7.5e-07 Ω·m |
Magnético
Chemical properties
Technological properties
| Property | ||
|---|---|---|
| Application areas | All cold work applications in cutting and forming engineering, e.g. for cutting and blanking tools, bending jaws, extrusion punches, deep-drawing dies, form and hobbing punches, clamping jaws, blanking sleeves, tools for the processing of steel, non-ferrous metals, aluminium, etc., as well as machine elements such as pulleys, rollers and guides exposed to heavy wear. | |
| General machinability | In as-delivered condition, this material can be machined by conventional methods. | |
| Heat Treatment | Soft annealing: 750°C,10 hr (Cooling in furnace) Hardness: 49 HRC - Stress-relief-annealing: 600-650°C (cooling in Furnace) - Hardening: 980-1100°C and quenching in vacuum (1 bar N2) - Temepering 150°C (Hardness:69 HRC) | |