Propiedades
General
| Property | Value |
|---|---|
Densidad | 7.9 g/cm³ Show Supplier Material materials with Densidad of 7.9 g/cm³ |
Medidas
| Property | Value | Comment |
|---|---|---|
Diámetro | 160 mm Show Supplier Material materials with Diámetro of 160 mm | max. |
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Dureza Brinell | 230 [-] Show Supplier Material materials with Dureza Brinell of 230 [-] | ||
Elongación | 35 % Show Supplier Material materials with Elongación of 35 % | A5 | |
Límite elástico | 190 MPa Show Supplier Material materials with Límite elástico of 190 MPa | RP02 | |
225 MPa Show Supplier Material materials with Límite elástico of 225 MPa | RP1 | ||
Módulo elástico | 20 °C | 200 GPa Show Supplier Material materials with Módulo elástico of 200 GPa | |
100 °C | 194 GPa Show Supplier Material materials with Módulo elástico of 194 GPa | ||
200 °C | 186 GPa Show Supplier Material materials with Módulo elástico of 186 GPa | ||
300 °C | 179 GPa Show Supplier Material materials with Módulo elástico of 179 GPa | ||
400 °C | 172 GPa Show Supplier Material materials with Módulo elástico of 172 GPa | ||
500 °C | 165 GPa Show Supplier Material materials with Módulo elástico of 165 GPa | ||
Resistencia a la tracción | 500 - 750 MPa Show Supplier Material materials with Resistencia a la tracción of 500 - 750 MPa |
Aplicaciones térmicas
| Property | Temperature | Value | Comment |
|---|---|---|---|
Calor específico | 500 J/(kg·K) Show Supplier Material materials with Calor específico of 500 J/(kg·K) | ||
Coeficiente de dilatación térmica | 100 °C | 1.6e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.6e-05 1/K | for 20°C to the mentioned temperature |
200 °C | 1.65e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.65e-05 1/K | for 20°C to the mentioned temperature | |
300 °C | 1.7e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.7e-05 1/K | for 20°C to the mentioned temperature | |
400 °C | 1.75e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.75e-05 1/K | for 20°C to the mentioned temperature | |
500 °C | 1.8e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.8e-05 1/K | for 20°C to the mentioned temperature | |
Conductividad térmica | 15 W/(m·K) Show Supplier Material materials with Conductividad térmica of 15 W/(m·K) |
Eléctrico
| Property | Value |
|---|---|
Resistividad eléctrica | 7.3e-07 Ω·m Show Supplier Material materials with Resistividad eléctrica of 7.3e-07 Ω·m |
Magnético
| Property | Value |
|---|---|
Permeabilidad magnética relativa | 1 [-] Show Supplier Material materials with Permeabilidad magnética relativa of 1 [-] |
Chemical properties
| Property | Value |
|---|---|
Azufre | 0.15 - 0.35 % Show Supplier Material materials with Azufre of 0.15 - 0.35 % |
Carbono | 0.1 % Show Supplier Material materials with Carbono of 0.1 % |
Cobre | 1 % Show Supplier Material materials with Cobre of 1 % |
Cromo | 17 - 19 % Show Supplier Material materials with Cromo of 17 - 19 % |
Fósforo | 0.045 % Show Supplier Material materials with Fósforo of 0.045 % |
Hierro | Balance |
Manganeso | 2 % Show Supplier Material materials with Manganeso of 2 % |
Nitrógeno | 0.1 % Show Supplier Material materials with Nitrógeno of 0.1 % |
Níquel | 8 - 10 % Show Supplier Material materials with Níquel of 8 - 10 % |
Silicona | 1 % Show Supplier Material materials with Silicona of 1 % |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Armatures for medium corrosive demands, Mechanical Engineering, Automotive Industry, Electronic devices, Decorative purposes, Kitchen equipment | |
| Corrosion properties | Corrosion resistance in acidic and chloride media is limited due to the addition of sulfur.When used in these media, pitting or cavity corrosion may occur. If higher corrosion resistance is required the use of the machining-optimized Acidur 4301 variant is recommended. Acidur 4305 is not resistant to intergranular corrosion As the PREN formula does not take into account the damaging influence of sulfur, the values given should be viewed with skepticism. | |
| Heat Treatment | Solution annealing: 1000-1100°C (water, air) fast cooling | |
| Hot forming | It is formable at 900-1200°C | |
| Processing history | Solution Annealed | |