Propiedades
General
| Property | Value |
|---|---|
Densidad | 7.9 g/cm³ Show Supplier Material materials with Densidad of 7.9 g/cm³ |
Medidas
| Property | Value | Comment |
|---|---|---|
Diámetro | 250 mm Show Supplier Material materials with Diámetro of 250 mm | max. |
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Charpy impact energy, V-notch | 100 J Show Supplier Material materials with Charpy impact energy, V-notch of 100 J | ||
Dureza Brinell | 215 [-] Show Supplier Material materials with Dureza Brinell of 215 [-] | ||
Elongación | 35 % Show Supplier Material materials with Elongación of 35 % | A5 | Transverse | |
45 % Show Supplier Material materials with Elongación of 45 % | A5 | ||
Límite elástico | 20 °C | 190 MPa Show Supplier Material materials with Límite elástico of 190 MPa | RP02 |
23 °C | 225 MPa Show Supplier Material materials with Límite elástico of 225 MPa | RP1 | |
100 °C | 155 MPa Show Supplier Material materials with Límite elástico of 155 MPa | RP02 | |
100 °C | 190 MPa Show Supplier Material materials with Límite elástico of 190 MPa | RP1 | |
150 °C | 140 MPa Show Supplier Material materials with Límite elástico of 140 MPa | RP02 | |
150 °C | 170 MPa Show Supplier Material materials with Límite elástico of 170 MPa | RP1 | |
200 °C | 127 MPa Show Supplier Material materials with Límite elástico of 127 MPa | RP02 | |
200 °C | 155 MPa Show Supplier Material materials with Límite elástico of 155 MPa | RP1 | |
250 °C | 118 MPa Show Supplier Material materials with Límite elástico of 118 MPa | RP02 | |
250 °C | 145 MPa Show Supplier Material materials with Límite elástico of 145 MPa | RP1 | |
300 °C | 110 MPa Show Supplier Material materials with Límite elástico of 110 MPa | RP02 | |
300 °C | 135 MPa Show Supplier Material materials with Límite elástico of 135 MPa | RP1 | |
350 °C | 104 MPa Show Supplier Material materials with Límite elástico of 104 MPa | RP02 | |
350 °C | 129 MPa Show Supplier Material materials with Límite elástico of 129 MPa | RP1 | |
400 °C | 98 MPa Show Supplier Material materials with Límite elástico of 98 MPa | RP02 | |
400 °C | 125 MPa Show Supplier Material materials with Límite elástico of 125 MPa | RP1 | |
450 °C | 95 MPa Show Supplier Material materials with Límite elástico of 95 MPa | RP02 | |
450 °C | 122 MPa Show Supplier Material materials with Límite elástico of 122 MPa | RP1 | |
500 °C | 95 MPa Show Supplier Material materials with Límite elástico of 95 MPa | RP02 | |
500 °C | 120 MPa Show Supplier Material materials with Límite elástico of 120 MPa | RP1 | |
550 °C | 90 MPa Show Supplier Material materials with Límite elástico of 90 MPa | RP02 | |
550 °C | 120 MPa Show Supplier Material materials with Límite elástico of 120 MPa | RP1 | |
Módulo elástico | 20 °C | 200 GPa Show Supplier Material materials with Módulo elástico of 200 GPa | |
100 °C | 194 GPa Show Supplier Material materials with Módulo elástico of 194 GPa | ||
200 °C | 186 GPa Show Supplier Material materials with Módulo elástico of 186 GPa | ||
300 °C | 179 GPa Show Supplier Material materials with Módulo elástico of 179 GPa | ||
400 °C | 172 GPa Show Supplier Material materials with Módulo elástico of 172 GPa | ||
500 °C | 165 GPa Show Supplier Material materials with Módulo elástico of 165 GPa | ||
Resistencia a la tracción | 500 - 700 MPa Show Supplier Material materials with Resistencia a la tracción of 500 - 700 MPa |
Aplicaciones térmicas
| Property | Temperature | Value | Comment |
|---|---|---|---|
Calor específico | 500 J/(kg·K) Show Supplier Material materials with Calor específico of 500 J/(kg·K) | ||
Coeficiente de dilatación térmica | 100 °C | 1.6e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.6e-05 1/K | for 20°C to the mentioned temperature |
200 °C | 1.65e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.65e-05 1/K | for 20°C to the mentioned temperature | |
300 °C | 1.7e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.7e-05 1/K | for 20°C to the mentioned temperature | |
400 °C | 1.75e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.75e-05 1/K | for 20°C to the mentioned temperature | |
500 °C | 1.8e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.8e-05 1/K | for 20°C to the mentioned temperature | |
Conductividad térmica | 15 W/(m·K) Show Supplier Material materials with Conductividad térmica of 15 W/(m·K) |
Eléctrico
| Property | Value |
|---|---|
Resistividad eléctrica | 7.3e-07 Ω·m Show Supplier Material materials with Resistividad eléctrica of 7.3e-07 Ω·m |
Chemical properties
| Property | Value |
|---|---|
Azufre | 0.03 % Show Supplier Material materials with Azufre of 0.03 % |
Carbono | 0.07 % Show Supplier Material materials with Carbono of 0.07 % |
Cromo | 17.5 - 19.5 % Show Supplier Material materials with Cromo of 17.5 - 19.5 % |
Fósforo | 0.045 % Show Supplier Material materials with Fósforo of 0.045 % |
Hierro | Balance |
Manganeso | 2 % Show Supplier Material materials with Manganeso of 2 % |
Nitrógeno | 0.1 % Show Supplier Material materials with Nitrógeno of 0.1 % |
Níquel | 8 - 10.5 % Show Supplier Material materials with Níquel of 8 - 10.5 % |
Silicona | 1 % Show Supplier Material materials with Silicona of 1 % |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Automotive industry, Building and Construction industry, Chemical industry, Food and Beverage industry, Decorative items and Kitchen Utensils, Electronic Equipment, Petrochemical industry | |
| Corrosion properties | Good - Due to the moderate carbon content of 1.4301, this grade of stainless steel is prone to sensitisation. The formation of chromium carbides and the associated chromium depleted regions that form around these precipitates make this grade of steel susceptible to intergranular corrosion. Although no danger of intergranular corrosion exists in the supplied (solution annealed) condition, intergranular corrosion may occur after welding or high temperature processing. 1.4301 is resistant to corrosion in most environments provided the chloride and salt concentrations are low. 1.4301 is not recommended for applications where it comes into contact with sea water, nor is it recommended for use in swimming pools. PRE = 17.5 – 21.36 | |
| General machinability | Average - For applications which require machining, the NIRO-CUT® 4301 grade is recommended since the composition and production route followed to produce this grade compensates for the work hardening tendency of the material. | |
| Heat Treatment | Optimal material properties are realised after solution annealing in the temperature range 1000 °C – 1100 °C followed by rapid cooling in air or water. Since this grade of steel is susceptible to precipitation of chromium carbides, care must be taken to limit the time spent in the temperature range 450 °C to 850 °C, both during fabrication and service. | |
| Hot forming | It is formable at 900-1200°C | |
| Processing history | Solution Annealed | |
| Welding | Excellent - 1.4301 is weldable with or without the use of filler material. If the use of a filler metal is required, then the use of Novonit® 4316 (AISI 308L) would be recommended. Maximum interpass temperature 200 °C. Post weld heat treatment is not necessary. | |