Propiedades
General
| Property | Value |
|---|---|
Densidad | 7.9 g/cm³ Show Supplier Material materials with Densidad of 7.9 g/cm³ |
Medidas
| Property | Value | Comment |
|---|---|---|
Diámetro | 250 mm Show Supplier Material materials with Diámetro of 250 mm | max. |
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Charpy impact energy, V-notch | 100 J Show Supplier Material materials with Charpy impact energy, V-notch of 100 J | ||
Dureza Brinell | 215 [-] Show Supplier Material materials with Dureza Brinell of 215 [-] | ||
Elongación | 35 % Show Supplier Material materials with Elongación of 35 % | A5 | Transverse | |
45 % Show Supplier Material materials with Elongación of 45 % | A5 | ||
Límite elástico | 20 °C | 175 MPa Show Supplier Material materials with Límite elástico of 175 MPa | RP02 |
23 °C | 210 MPa Show Supplier Material materials with Límite elástico of 210 MPa | RP1 | |
100 °C | 145 MPa Show Supplier Material materials with Límite elástico of 145 MPa | RP02 | |
100 °C | 180 MPa Show Supplier Material materials with Límite elástico of 180 MPa | RP1 | |
108 °C | 80 MPa Show Supplier Material materials with Límite elástico of 80 MPa | RP02 | |
150 °C | 130 MPa Show Supplier Material materials with Límite elástico of 130 MPa | RP02 | |
150 °C | 160 MPa Show Supplier Material materials with Límite elástico of 160 MPa | RP1 | |
200 °C | 118 MPa Show Supplier Material materials with Límite elástico of 118 MPa | RP02 | |
200 °C | 145 MPa Show Supplier Material materials with Límite elástico of 145 MPa | RP1 | |
250 °C | 108 MPa Show Supplier Material materials with Límite elástico of 108 MPa | RP02 | |
250 °C | 135 MPa Show Supplier Material materials with Límite elástico of 135 MPa | RP1 | |
300 °C | 100 MPa Show Supplier Material materials with Límite elástico of 100 MPa | RP02 | |
300 °C | 127 MPa Show Supplier Material materials with Límite elástico of 127 MPa | RP1 | |
350 °C | 94 MPa Show Supplier Material materials with Límite elástico of 94 MPa | RP02 | |
350 °C | 121 MPa Show Supplier Material materials with Límite elástico of 121 MPa | RP1 | |
400 °C | 89 MPa Show Supplier Material materials with Límite elástico of 89 MPa | RP02 | |
400 °C | 116 MPa Show Supplier Material materials with Límite elástico of 116 MPa | RP1 | |
450 °C | 85 MPa Show Supplier Material materials with Límite elástico of 85 MPa | RP02 | |
450 °C | 112 MPa Show Supplier Material materials with Límite elástico of 112 MPa | RP1 | |
500 °C | 81 MPa Show Supplier Material materials with Límite elástico of 81 MPa | RP02 | |
500 °C | 1099 MPa Show Supplier Material materials with Límite elástico of 1099 MPa | RP1 | |
550 °C | 108 MPa Show Supplier Material materials with Límite elástico of 108 MPa | RP1 | |
Módulo elástico | 20 °C | 200 GPa Show Supplier Material materials with Módulo elástico of 200 GPa | |
100 °C | 194 GPa Show Supplier Material materials with Módulo elástico of 194 GPa | ||
200 °C | 186 GPa Show Supplier Material materials with Módulo elástico of 186 GPa | ||
300 °C | 179 GPa Show Supplier Material materials with Módulo elástico of 179 GPa | ||
400 °C | 172 GPa Show Supplier Material materials with Módulo elástico of 172 GPa | ||
500 °C | 165 GPa Show Supplier Material materials with Módulo elástico of 165 GPa | ||
Resistencia a la tracción | 500 - 700 MPa Show Supplier Material materials with Resistencia a la tracción of 500 - 700 MPa |
Aplicaciones térmicas
| Property | Temperature | Value | Comment |
|---|---|---|---|
Calor específico | 500 J/(kg·K) Show Supplier Material materials with Calor específico of 500 J/(kg·K) | ||
Coeficiente de dilatación térmica | 100 °C | 1.6e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.6e-05 1/K | for 20°C to the mentioned temperature |
200 °C | 1.65e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.65e-05 1/K | for 20°C to the mentioned temperature | |
300 °C | 1.7e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.7e-05 1/K | for 20°C to the mentioned temperature | |
400 °C | 1.75e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.75e-05 1/K | for 20°C to the mentioned temperature | |
500 °C | 1.8e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.8e-05 1/K | for 20°C to the mentioned temperature | |
Conductividad térmica | 15 W/(m·K) Show Supplier Material materials with Conductividad térmica of 15 W/(m·K) |
Eléctrico
| Property | Value |
|---|---|
Resistividad eléctrica | 7.3e-07 Ω·m Show Supplier Material materials with Resistividad eléctrica of 7.3e-07 Ω·m |
Chemical properties
| Property | Value |
|---|---|
Azufre | 0.03 % Show Supplier Material materials with Azufre of 0.03 % |
Carbono | 0.03 % Show Supplier Material materials with Carbono of 0.03 % |
Cromo | 17.5 - 19.5 % Show Supplier Material materials with Cromo of 17.5 - 19.5 % |
Fósforo | 0.045 % Show Supplier Material materials with Fósforo of 0.045 % |
Hierro | Balance |
Manganeso | 2 % Show Supplier Material materials with Manganeso of 2 % |
Nitrógeno | 0.1 % Show Supplier Material materials with Nitrógeno of 0.1 % |
Níquel | 8 - 10.5 % Show Supplier Material materials with Níquel of 8 - 10.5 % |
Silicona | 1 % Show Supplier Material materials with Silicona of 1 % |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Automotive industry, Building and Construction industry, Chemical industry, Food and Beverage industry, Decorative items and Kitchen Utensils, Electronic Equipment, Petrochemical industry | |
| Corrosion properties | Due to the low carbon content of 1.4307, there is virtually no tendency for the formation of chromium carbides and the associated chromium depleted regions that would form around these precipitates. Resistance to intergranular corrosion is thus far superior to 1.4301. Since this grade of stainless steel is still resistant to intergranular corrosion after welding, i.e. in the sensitised condition, corrosion testing in accordance with the following corrosion testing specifications is thus sufficient to establish resistance to corrosion: AFNOR NF 05-159 – ASTM A262-75. Practice E – DIN EN ISO 3651-2 - 1.4307 is resistant to corrosion in most natural waters and urban and rural atmospheres, provided that the chloride and salt contents are low. This grade of stainless steel is not resistant to sea water and as such must not be used in any sea water applications. As with 1.4301, this steel is not suited for use in swimming pools or swimming pool environments. Resistance to reducing acids is also confined to low concentrations and low temperatures. Optimal material properties are realised after solution annealing in the temperature range . PRE = 16.5 – 20.26 | |
| General machinability | For applications which require machining, the NIRO-CUT® 4307 grade is recommended since the composition and production route followed to produce this steel compensates for the work hardening tendency of the material. The following cutting parameters are thus proposed as a guideline when using coated hard metal cutting tools. | |
| Heat Treatment | Optimal material properties are realised after solution annealing in the temperature range 1000 °C – 1100 °C followed by rapid cooling in air or water. During operation and fabrication, the time spent in the temperature range 450 °C – 850 °C must be minimised to avoid embrittlement. In the solution annealed condition | |
| Hot forming | It is formable at 900-1200°C | |
| Processing history | Solution Annealed | |
| Welding | 1.4307 is weldable with or without the use of filler material. If a filler metal is required, then the use of Novonit® 4316 (AISI 308L) would be recommended. Post weld heat treatment is not necessary | |