General
Property | Temperature | Value | Comment |
---|---|---|---|
Bio-based content | 100 % Show Supplier Material materials with Bio-based content of 100 % | ||
Densidad | 23.0 °C | 1.45 g/cm³ Show Supplier Material materials with Densidad of 1.45 g/cm³ | ISO 2781 |
Mecánica
Property | Temperature | Value | Comment |
---|---|---|---|
Elongación | 23.0 °C | 22.3 % Show Supplier Material materials with Elongación of 22.3 % | ISO 527 |
Módulo de flexión | 23.0 °C | 3.4 GPa Show Supplier Material materials with Módulo de flexión of 3.4 GPa | ISO 527 |
Resistencia a la flexión | 23.0 °C | 30 MPa Show Supplier Material materials with Resistencia a la flexión of 30 MPa | ISO 527 |
Resistencia a la tracción | 23.0 °C | 43 MPa Show Supplier Material materials with Resistencia a la tracción of 43 MPa | ISO 527 |
Aplicaciones térmicas
Property | Value | Comment |
---|---|---|
Temperatura de fusión | 160 - 200 °C Show Supplier Material materials with Temperatura de fusión of 160 - 200 °C | |
Temperatura de reblandecimiento Vicat | 48 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 48 °C | ISO 306 |
Rheological Properties
Property | Value | Comment |
---|---|---|
Velocidad de flujo de la masa derretida | 15 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 15 g/10min | ISO 1133 |
Technological properties
Property | ||
---|---|---|
Application areas | Flax enables a high printing speed and therefore saves time, which is why it is often used in rapid prototyping. | |
Chemical composition | Biodegradable batch based on PLA, contains copolyester and additives. | |
Handling recommendations | Store at room temperature (18-27°C / 65-80°F), out of direct heat and sunlight, and in a dry place. When stored correctly, this material has a shelf life of 1 year |