extrudr Pearl Filament

Nombres alternativos y comerciales
extrudr Pearl Filament
Want to keep this datasheet? Save it now in your required format

Description

Pearl is made from a renewable biodegradable biopolymer developed for use in design.

Los datos sobre este material han sido proporcionados por extrudr.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueComment

Bio-based content

100 %

Show Supplier Material materials with Bio-based content of 100 %

Densidad

23.0 °C

1.25 g/cm³

Show Supplier Material materials with Densidad of 1.25 g/cm³

ISO 2781

Mecánica

PropertyTemperatureValueComment

Elongación

23.0 °C

6.9 %

Show Supplier Material materials with Elongación of 6.9 %

ISO 527

Módulo de flexión

23.0 °C

2.5 GPa

Show Supplier Material materials with Módulo de flexión of 2.5 GPa

ISO 527

Módulo elástico

23.0 °C

1.8 GPa

Show Supplier Material materials with Módulo elástico of 1.8 GPa

ISO 178

Resistencia a la flexión

23.0 °C

30.1 MPa

Show Supplier Material materials with Resistencia a la flexión of 30.1 MPa

ISO 527

Resistencia a la tracción

23.0 °C

34 MPa

Show Supplier Material materials with Resistencia a la tracción of 34 MPa

ISO 527

Aplicaciones térmicas

PropertyValueComment

Heat deflection temperature, 0.45 MPa

51 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 51 °C

ISO 75/B

Temperatura de flexión bajo carga

51 °C

Show Supplier Material materials with Temperatura de flexión bajo carga of 51 °C

Temperatura de reblandecimiento Vicat

58 °C

Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 58 °C

ISO 306

Rheological Properties

PropertyTemperatureValueComment

Contracción

23.0 °C

0.67 %

Show Supplier Material materials with Contracción of 0.67 %

ISO 294-4

Velocidad de flujo de la masa derretida

4 g/10min

Show Supplier Material materials with Velocidad de flujo de la masa derretida of 4 g/10min

ISO 1133

Technological properties

Property
Application areas

Pearl is characterized by its uniquely silky-smooth surface.

Handling recommendations

Store at room temperature (18-27°C / 65-80°F), out of direct heat and sunlight, and in a dry place. When stored correctly, this material has a shelf life of 1 year.