Al cast plate G.AL® C330R, sawed mould plate

Want to keep this datasheet? Save it now in your required format

Description

The higher-strength aluminum plate G.AL® C330R from alloy EN AW 7021 (AlZn5.5Mg1.5) with material temper T79 sawn on all sides is characterized by very high strength and hardness as well as very good low-stress properties. The very low strength and hardness decrease from plate edge to the centre makes G.AL® C330R a superior material in virtually all sectors of the capital goods industry.

Equivalent Materials

Los datos sobre este material han sido proporcionados por Gleich Aluminum.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValue

Densidad

23.0 °C

2.8 g/cm³

Show Supplier Material materials with Densidad of 2.8 g/cm³

Rugosidad superficial

15 μm

Show Supplier Material materials with Rugosidad superficial of 15 μm

Medidas

PropertyValue

Ancho

1540 mm

Show Supplier Material materials with Ancho of 1540 mm

Dimensions

Standard stock sizes: 1540mm x 3048mm and 20-570mm in thickness

Mecánica

PropertyTemperatureValueComment

Dureza Brinell (HBW)

23.0 °C

110 - 120 [-]

Show Supplier Material materials with Dureza Brinell (HBW) of 110 - 120 [-]

Test method: 2.5/62.5

Elongación A5

23.0 °C

2.5 - 4.5 %

Show Supplier Material materials with Elongación A5 of 2.5 - 4.5 %

Límite elástico Rp 0,2

23.0 °C

290 - 340 MPa

Show Supplier Material materials with Límite elástico Rp 0,2 of 290 - 340 MPa

Módulo elástico

23.0 °C

70 GPa

Show Supplier Material materials with Módulo elástico of 70 GPa

Resistencia a la tracción

23.0 °C

320 - 380 MPa

Show Supplier Material materials with Resistencia a la tracción of 320 - 380 MPa

Aplicaciones térmicas

PropertyTemperatureValue

Calor específico

23.0 °C

875 J/(kg·K)

Show Supplier Material materials with Calor específico of 875 J/(kg·K)

Coeficiente de dilatación térmica

23.0 °C

2.3E-5 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica of 2.3E-5 1/K

Conductividad térmica

23.0 °C

125 - 155 W/(m·K)

Show Supplier Material materials with Conductividad térmica of 125 - 155 W/(m·K)

Eléctrico

PropertyTemperatureValue

Conductividad eléctrica

23.0 °C

2.10E+7 - 2.40E+7 S/m

Show Supplier Material materials with Conductividad eléctrica of 2.10E+7 - 2.40E+7 S/m

Technological properties

Property
Other

Heat treatable alloy

Processing history

Temper: T79, solution heat treated and artificially aged