UHMWPE ISO-TECH

Nombres alternativos y comerciales
ISO-LEN® 1000
Want to keep this datasheet? Save it now in your required format

Description

ISO-LEN® 1000 has been proven for many years in various fields of application. Due to its wide range of characteristics, this all-round material is being used in products in all areas of technology where particularly high demands on material are required. The key features are:


  • High abrasion resistance
  • Low friction coefficient
  • Self-lubricating
  • Very high notched impact strength
  • Related Standards

    Los datos sobre este material han sido proporcionados por ISO-TECH Kunststoff GmbH.

    A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
    Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

    Ashby charts

    See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

    Propiedades

    General

    PropertyValueComment

    Absorción de agua

    0.01 %

    Show Supplier Material materials with Absorción de agua of 0.01 %

    ISO 62

    Coefficient of friction

    0.12 [-]

    Show Supplier Material materials with Coefficient of friction of 0.12 [-]

    DIN 53375, A, Against dry running steel

    Densidad

    0.93 g/cm³

    Show Supplier Material materials with Densidad of 0.93 g/cm³

    ISO 1183

    Mecánica

    PropertyValueComment

    Dureza Shore D

    63 [-]

    Show Supplier Material materials with Dureza Shore D of 63 [-]

    DIN 53505

    Elongación

    50 %

    Show Supplier Material materials with Elongación of 50 %

    min., ISO 527

    Elongation at yield

    8 %

    Show Supplier Material materials with Elongation at yield of 8 %

    min., ISO 527

    Hardness, Ball Indentation

    38 MPa

    Show Supplier Material materials with Hardness, Ball Indentation of 38 MPa

    ISO 2039-1

    Límite elástico

    17 MPa

    Show Supplier Material materials with Límite elástico of 17 MPa

    ISO 527

    Módulo elástico

    0.7 GPa

    Show Supplier Material materials with Módulo elástico of 0.7 GPa

    min., ISO 527

    Resistencia a desgarros

    40 kN/m

    Show Supplier Material materials with Resistencia a desgarros of 40 kN/m

    min., ISO 527

    Resistencia a la flexión

    27 MPa

    Show Supplier Material materials with Resistencia a la flexión of 27 MPa

    ISO 178

    Resistencia al choque, ensayo Charpy entallado

    No break, ISO 179

    Resistencia al choque, ensayo Charpy no entallado

    No break, ISO 179

    Aplicaciones térmicas

    PropertyValuePressureComment

    Coeficiente de dilatación térmica

    0.0002 1/K

    Show Supplier Material materials with Coeficiente de dilatación térmica of 0.0002 1/K

    DIN 53752

    Conductividad térmica

    0.41 W/(m·K)

    Show Supplier Material materials with Conductividad térmica of 0.41 W/(m·K)

    DIN 52612

    Temperatura de flexión bajo carga

    42 °C

    Show Supplier Material materials with Temperatura de flexión bajo carga of 42 °C

    2 MPa

    65 °C

    Show Supplier Material materials with Temperatura de flexión bajo carga of 65 °C

    0.45 MPa

    Temperatura de reblandecimiento Vicat

    79 °C

    Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 79 °C

    ISO 306, VST B50

    Temperatura máx. de funcionamiento

    90 °C

    Show Supplier Material materials with Temperatura máx. de funcionamiento of 90 °C

    Longterm

    Long

    Short

    Temperatura mín. de funcionamiento

    -150 °C

    Show Supplier Material materials with Temperatura mín. de funcionamiento of -150 °C

    Longterm

    Inflamabilidad

    HB UL 94

    Eléctrico

    PropertyValueComment

    Constante dieléctrica

    3 [-]

    Show Supplier Material materials with Constante dieléctrica of 3 [-]

    DIN 53483

    Rigidez dieléctrica

    45 kV/mm

    Show Supplier Material materials with Rigidez dieléctrica of 45 kV/mm

    VDE 0303

    Surface resistivity

    1e+11 Ω/sq

    Show Supplier Material materials with Surface resistivity of 1e+11 Ω/sq

    min., VDE 0303

    Tangente de pérdidas

    0.0001 [-]

    Show Supplier Material materials with Tangente de pérdidas of 0.0001 [-]

    DIN 53483

    Volume resistivity

    1e+14 Ω·cm

    Show Supplier Material materials with Volume resistivity of 1e+14 Ω·cm

    min., VDE 0303

    Technological properties

    Property
    Application areas

    Sliding parts, chain guidance and sliding profiles

    Certifications

    Food Contact: FDA and EU 10/2011, RoHS,REACH