UHMWPE ISO-TECH M

Nombres alternativos y comerciales
ISO-MOL®
Want to keep this datasheet? Save it now in your required format

Description

ISO-MOL® is a self-lubricating material based on a PE-UHMW with significantly improved sliding friction and abrasion resistance. Being an advancement of ISO-LEN® 1000, the addition of additives results in excellent wear behaviour and a very good sliding friction coefficient. ISO-MOL® is mainly used in plants where downtimes are very cost-intensive. In particular, slide rails and chain guide profiles as well as linings in the bulk goods sector are frequently produced on the basis of ISO-MOL®. The key features are:


  • Very low sliding friction coefficient
  • Higher abrasion resistance
  • Related Standards

    Los datos sobre este material han sido proporcionados por ISO-TECH Kunststoff GmbH.

    A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
    Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

    Ashby charts

    See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

    Propiedades

    General

    PropertyValueComment

    Absorción de agua

    0.01 %

    Show Supplier Material materials with Absorción de agua of 0.01 %

    ISO 62

    Coefficient of friction

    0.08 [-]

    Show Supplier Material materials with Coefficient of friction of 0.08 [-]

    DIN 53375, A, Against dry running steel

    Densidad

    0.93 g/cm³

    Show Supplier Material materials with Densidad of 0.93 g/cm³

    ISO 1183

    Mecánica

    PropertyValueComment

    Dureza Shore D

    61 [-]

    Show Supplier Material materials with Dureza Shore D of 61 [-]

    DIN 53505

    Elongation at yield

    20 %

    Show Supplier Material materials with Elongation at yield of 20 %

    ISO 527

    Hardness, Ball Indentation

    35 MPa

    Show Supplier Material materials with Hardness, Ball Indentation of 35 MPa

    Límite elástico

    17 MPa

    Show Supplier Material materials with Límite elástico of 17 MPa

    ISO 527

    Módulo elástico

    0.68 GPa

    Show Supplier Material materials with Módulo elástico of 0.68 GPa

    min., ISO 527

    Resistencia a la flexión

    27 MPa

    Show Supplier Material materials with Resistencia a la flexión of 27 MPa

    ISO 178

    Resistencia a la tracción

    28 MPa

    Show Supplier Material materials with Resistencia a la tracción of 28 MPa

    DIN 53455

    Elongación

    No break, ISO 527

    Resistencia a desgarros

    No break, ISO 527

    Resistencia al choque, ensayo Charpy entallado

    No break, ISO 179

    Resistencia al choque, ensayo Charpy no entallado

    No break, ISO 179

    Aplicaciones térmicas

    PropertyValuePressureComment

    Coeficiente de dilatación térmica

    0.0002 1/K

    Show Supplier Material materials with Coeficiente de dilatación térmica of 0.0002 1/K

    DIN 53752

    Conductividad térmica

    0.41 W/(m·K)

    Show Supplier Material materials with Conductividad térmica of 0.41 W/(m·K)

    DIN 52612

    Temperatura de flexión bajo carga

    42 °C

    Show Supplier Material materials with Temperatura de flexión bajo carga of 42 °C

    0.45 MPa

    Temperatura de reblandecimiento Vicat

    80 °C

    Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 80 °C

    ISO 306, VST B50

    Temperatura máx. de funcionamiento

    80 °C

    Show Supplier Material materials with Temperatura máx. de funcionamiento of 80 °C

    Longterm

    Long

    Short

    Temperatura mín. de funcionamiento

    -150 °C

    Show Supplier Material materials with Temperatura mín. de funcionamiento of -150 °C

    Longterm

    Inflamabilidad

    HB UL 94

    Technological properties

    Property
    Application areas

    Sliding parts, chain guidance and sliding profiles

    Certifications

    Food Contact: FDA and EU 10/2011, RoHS,REACH