Cycolac™ MG47F resin

Want to keep this datasheet? Save it now in your required format

Description

Cycolac™ is a range of thermoplastic resin products, developed by Sabic, which is made of acrylonitrile-butadiene-styrene (ABS). It has excellent colourability and can be found in a wide range of colours, offering outstanding aesthetics. They have highly tailorable engineering properties and outstanding flow, toughness, dimensional stability, scratch resistance, and high-temperature resistance.
Cycolac™ MG47F resin is a multi-purpose ABS for injection moulding. It is FDA approved. As a multi-purpose material, it provides a favourable balance of engineering properties. Its key features include:

Excellent aesthetics
High toughness
Good dimensional stability
High scratch resistance
High temperature resistance
Excellent colourability
Good fatigue and chemical resistance

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	1.04 g/cm³ Show Material materials with Densidad of 1.04 g/cm³	ASTM D792

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	24 % Show Material materials with Elongación of 24 %	ASTM D638
Elongation at yield	23.0 °C	2 % Show Material materials with Elongation at yield of 2 %	ASTM D638
Flexural yield strength	23.0 °C	70 MPa Show Material materials with Flexural yield strength of 70 MPa	ASTM D790
Impact strength, Izod notched, ASTM	23.0 °C	320 J/m Show Material materials with Impact strength, Izod notched, ASTM of 320 J/m	ASTM D256
Límite elástico	23.0 °C	44 MPa Show Material materials with Límite elástico of 44 MPa	ASTM D638
Módulo de flexión	23.0 °C	2.3 GPa Show Material materials with Módulo de flexión of 2.3 GPa	ASTM D790
Módulo elástico	23.0 °C	2.27 GPa Show Material materials with Módulo elástico of 2.27 GPa	ASTM D790
Resistencia a la tracción	23.0 °C	33 MPa Show Material materials with Resistencia a la tracción of 33 MPa	ASTM D638
Resistencia al choque, ensayo Charpy entallado	-30.0 °C	9 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 9 kJ/m²	ISO 179/1eA
	23.0 °C	26 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 26 kJ/m²	ISO 179/1eA

Resistencia al choque, ensayo Izod entallado	-30.0 °C	8 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod entallado of 8 kJ/m²	ISO 180/1A
	23.0 °C	22 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod entallado of 22 kJ/m²	ISO 180/1A
	Unlock all property charts

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	8.82E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 8.82E-5 1/K	ASTM E831, for -40 to 40°C
Coeficiente de dilatación térmica transversal	23.0 °C	8.82E-5 1/K Show Material materials with Coeficiente de dilatación térmica transversal of 8.82E-5 1/K	ASTM E831, for -40 to 40°C
Heat deflection temperature, 0.45 MPa		94 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 94 °C	ASTM D648
Heat deflection temperature, 1.80 MPa		80 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 80 °C	ASTM D648
Relative temperature index, electrical		60 °C Show Material materials with Relative temperature index, electrical of 60 °C	UL 746
Relative temperature index, mechanical strength		60 °C Show Material materials with Relative temperature index, mechanical strength of 60 °C	UL 746
Temperatura de fusión		220 - 260 °C Show Material materials with Temperatura de fusión of 220 - 260 °C
Temperatura de reblandecimiento Vicat		98 °C Show Material materials with Temperatura de reblandecimiento Vicat of 98 °C	ISO 906, Rate B/50
Inflamabilidad	UL Recognized, 94HB Flame Class Rating (3) 1.5 mm UL 94

Rheological Properties

Property	Value	Comment
Velocidad de flujo de la masa derretida	5.6 g/10min Show Material materials with Velocidad de flujo de la masa derretida of 5.6 g/10min	ASTM D1238 230°C/3.8 kgf
Velocidad de flujo del volumen derretido	18 cm³/10min Show Material materials with Velocidad de flujo del volumen derretido of 18 cm³/10min	ISO 1133, 220°C/10.0 kg

Technological properties

Property
Application areas	Additive manufacturing, Appliances, Automotive exterior parts, Construction applications, Electronic displays, Fluid handling, Lawn and garden equipment, Lenses, Lighting applications, medical/healthcare, Non-specific food, Outdoor applications, packaging
Color	Black, White, Natural (unpigmented)
Processing methods	Injection Molding: Drying Temperature: 80-95°C, Drying Time: 2-4 hr, Rear Temperature: 190-210°C, Middle Temperature: 205-225°C, Front Temperature: 215-240°C, Nozzle Temperature: 220-260°C, Melt Temperature: 220-260°C, Mold Temperature: 50-70°C, Back Pressure: 0.3-0.7 MPa, Screw Speed 30-60 rpm

Cycolac™ MG47F resin

Description

Ashby charts

Lectura sugerida

Propiedades