SABIC® PS 325

Want to keep this datasheet? Save it now in your required format

Description

PS 325 is High Impact Polystyrene manufactured by continuous mass polymerization of styrene monomer. An elastomer is incorporated during polymerization to achieve impact resistance property. It is generally opaque in color. It is having medium flow characteristics with high tensile and flexural strength with medium heat deflection and vicat temperatures.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad aparente	23.0 °C	0.6 g/cm³ Show Material materials with Densidad aparente of 0.6 g/cm³	ASTM D 1895

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	50 % Show Material materials with Elongación of 50 %	ASTM D638
Hardness, Rockwell L	23.0 °C	60 [-] Show Material materials with Hardness, Rockwell L of 60 [-]	ASTM D785
Módulo de flexión	23.0 °C	2.35 GPa Show Material materials with Módulo de flexión of 2.35 GPa	ASTM D 790
Módulo elástico	23.0 °C	2.16 GPa Show Material materials with Módulo elástico of 2.16 GPa	ASTM D638
Resistencia a la flexión	23.0 °C	35 MPa Show Material materials with Resistencia a la flexión of 35 MPa	ASTM D790
Resistencia a la tracción	23.0 °C	22 MPa Show Material materials with Resistencia a la tracción of 22 MPa	ASTM D638

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 0.45 MPa	93 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 93 °C	ASTM D648
Temperatura de reblandecimiento Vicat	95 °C Show Material materials with Temperatura de reblandecimiento Vicat of 95 °C	ASTM D 1525 \| Rate A/50°C

Technological properties

Property
Application areas	Air Conditioning,Amusement Machine,ATM/Ticket Machine,Auto Aftermarket,Circuit Protection,Cluster,Console,Cooking Range,Data Transfer,Dishwasher,Document Handling,Door Handle,Electronic Components,Enclosure/Housing/Cover,Enclosures,Energy Management,EV Infrastructure,Exterior Mirror,Fluid Delivery,Food Transportation,Forward Lighting,Gas/Electric Oven,Heavy Vehicles,Hygiene/Personal Care,Laundry Dryer,Lawn/Garden,LED Lighting,Medical Device,Meter Gas,Meter Water,Monitoring and Imaging,Motorcycle,Non-LED Lighting,Personal Computing,Power Manangement,Rear/Signal Lighting,Refrigerator,Respiratory,Small Appliance,Surgical Devices,Swimming Pool/Spa,Trim,Watch/Jewelry,Wireless Communications,Wiring Devices,Irrigation,Wire & cable

SABIC® PS 325

Description

Ashby charts

Lectura sugerida

Propiedades