General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Densidad | 23.0 °C | 1 g/cm³ Show Material materials with Densidad of 1 g/cm³ | ASTM D 792 |
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongación | 23.0 °C | 26.7 % Show Material materials with Elongación of 26.7 % | ISO 527 | 50 mm/min |
Elongation at yield | 23.0 °C | 4.6 % Show Material materials with Elongation at yield of 4.6 % | ISO 527 | 50 mm/min |
Límite elástico | 23.0 °C | 25 MPa Show Material materials with Límite elástico of 25 MPa | ISO 527 | 50 mm/min |
Módulo de flexión | 23.0 °C | 2.05 GPa Show Material materials with Módulo de flexión of 2.05 GPa | ISO 178 | 2 mm/min, 64mm |
Módulo elástico | 23.0 °C | 1.96 GPa Show Material materials with Módulo elástico of 1.96 GPa | ISO 527 | 1 mm/min |
Resistencia a la tracción | 23.0 °C | 18 MPa Show Material materials with Resistencia a la tracción of 18 MPa | ISO 527 | 50 mm/min, 1A |
Resistencia al choque, ensayo Charpy entallado | 23.0 °C | 4 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 4 kJ/m² | ISO 179/1eA |
Aplicaciones térmicas
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coeficiente de dilatación térmica | 23.0 °C | 5.6E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 5.6E-5 1/K | ISO 11359-2 | -30°C to 100°C |
Coeficiente de dilatación térmica transversal | 23.0 °C | 1.16E-4 1/K Show Material materials with Coeficiente de dilatación térmica transversal of 1.16E-4 1/K | ISO 11359-2 | -30°C to 100°C |
Heat deflection temperature, 1.80 MPa | 62 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 62 °C | ISO 75-1&2 | 1.8 MPa |
Rheological Properties
| Property | Value | Comment |
|---|---|---|
Velocidad de flujo de la masa derretida | 23 g/10min Show Material materials with Velocidad de flujo de la masa derretida of 23 g/10min | ISO 1133 | 230°C/2.16 kg |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Load Floor | |
| Fillers | Mineral Powder | |
| Processing methods | Drying Temperature: 80-100°C, Drying Time: 2-4hrs, Melt Temperature: 210-270°C, Nozzle Temperature: 210-270°C, Front - Zone 3 Temperature: 210-270°C, Middle - Zone 2 Temperature: 200-250°C, Rear - Zone 1 Temperature: 190-230°C, Mold Temperature: 15-60°C, Back Pressure: 1-1.5MPa | |