SABIC® POM 140S

Want to keep this datasheet? Save it now in your required format

Description

SABIC® POM 140S is an easy flowing grade suitable for injection molding applications for precision molded parts and thinwalled molded parts require high rigidity.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueComment

Absorción de agua

23.0 °C

0.65 %

Show Material materials with Absorción de agua of 0.65 %

ISO 62

Densidad

23.0 °C

1.41 g/cm³

Show Material materials with Densidad of 1.41 g/cm³

ISO 1183

Mecánica

PropertyTemperatureValueComment

Elongation at yield

23.0 °C

9 %

Show Material materials with Elongation at yield of 9 %

ISO 527-2 1A | 50mm/min

Límite elástico

23.0 °C

65 MPa

Show Material materials with Límite elástico of 65 MPa

ISO 527-2 1A | 50 mm/min

Módulo de flexión

23.0 °C

2.8 GPa

Show Material materials with Módulo de flexión of 2.8 GPa

ISO 178

Módulo elástico

23.0 °C

2.9 GPa

Show Material materials with Módulo elástico of 2.9 GPa

ISO 527-2 1A | 1mm/min

Resistencia al choque, ensayo Charpy entallado

-30.0 °C

140 kJ/m²

Show Material materials with Resistencia al choque, ensayo Charpy entallado of 140 kJ/m²

ISO 179/1eU

23.0 °C

150 kJ/m²

Show Material materials with Resistencia al choque, ensayo Charpy entallado of 150 kJ/m²

ISO 179/1eU

Aplicaciones térmicas

PropertyTemperatureValueComment

Coeficiente de dilatación térmica

23.0 °C

1.1E-4 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.1E-4 1/K

ISO 11359-2

Heat deflection temperature, 1.80 MPa

106 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 106 °C

ISO 75-1&2 | 1.8 MPa

Temperatura de fusión

166 °C

Show Material materials with Temperatura de fusión of 166 °C

ISO 11357-1/-3

Rheological Properties

PropertyTemperatureValueComment

Contracción

23.0 °C

2 %

Show Material materials with Contracción of 2 %

ISO 294-4

Contracción transversal

23.0 °C

1.8 %

Show Material materials with Contracción transversal of 1.8 %

ISO 294-4

Velocidad de flujo del volumen derretido

12 cm³/10min

Show Material materials with Velocidad de flujo del volumen derretido of 12 cm³/10min

ISO 1133

Technological properties

Property
Application areas

Automotive