SABIC® LDPE 2101N0W

Want to keep this datasheet? Save it now in your required format

Description

SABIC® LDPE 2101N0W is a grade with good toughness and biaxial shrink properties. The material contains no additives, has a low energy consumption during processing and a good draw down ability. Application SABIC® LDPE 2101N0W is typically used for thin shrink film. SABIC® LDPE 2101N0W can typically be used for food applications due to very low migration levels. Film properties Film properties have been measured at 50 μm film with a BUR of 3. The film has been produced on Kiefel IBC film blown line at 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyTemperatureValueComment

Coefficient of friction

1 [-]

Show Material materials with Coefficient of friction of 1 [-]

ASTM D1894

Densidad

23.0 °C

0.92 g/cm³

Show Material materials with Densidad of 0.92 g/cm³

ASTM D1505

Mecánica

PropertyTemperatureValueComment

Resistencia a desgarros

23.0 °C

40 kN/m

Show Material materials with Resistencia a desgarros of 40 kN/m

ISO 6383-2

Resistencia a desgarros transversal

23.0 °C

30 kN/m

Show Material materials with Resistencia a desgarros transversal of 30 kN/m

ISO 6383-2

Óptico

PropertyValueComment

Turbidez

9 %

Show Material materials with Turbidez of 9 %

ASTM D1003

Technological properties

Property
Application areas

It is used for food applications (thin shrink film) due to very low migration levels.