SABIC® LLDPE 218BE

Want to keep this datasheet? Save it now in your required format

Description

SABIC® LLDPE 218BE is a butene linear low density polyethylene resin with an additive package typically designed for a broader range of food applications (TNPP free). The good thermal stability allows to use the resin in critical extrusion processing conditions. Application SABIC® LLDPE 218BE is typically used for food applications (lamination film, barrier film) but can also be used in industrial packaging and as blending partner with other SABIC® PE resins in both blown and cast film applications. This product is not intended for and must not be used in any pharmaceutical/medical applications.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	0.92 g/cm³ Show Material materials with Densidad of 0.92 g/cm³	ASTM D1505

Mecánica

Property	Temperature	Value	Comment
Dureza Shore D	23.0 °C	48 [-] Show Material materials with Dureza Shore D of 48 [-]	ISO 868
Resistencia a desgarros transversal	23.0 °C	185 kN/m Show Material materials with Resistencia a desgarros transversal of 185 kN/m	ISO 6383-2

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica	23.0 °C	2.17 [-] Show Material materials with Constante dieléctrica of 2.17 [-]	ASTM D150 \| at 60 Hz
Factor de disipación	23.0 °C	1000 [-] Show Material materials with Factor de disipación of 1000 [-]	ASTM D150 \| at 60 Hz
Resistividad eléctrica	23.0 °C	5.00E+13 Ω·m Show Material materials with Resistividad eléctrica of 5.00E+13 Ω·m	ASTM D257
Rigidez dieléctrica	23.0 °C	55 kV/mm Show Material materials with Rigidez dieléctrica of 55 kV/mm	ASTM D149 \| at 500 V/sec

Óptico

Property	Value	Comment
Turbidez	1.2 % Show Material materials with Turbidez of 1.2 %	ASTM D1003

Technological properties

Property
Application areas	It is typically used for food applications (lamination film, barrier film) but can also be used in industrial packaging and as blending partner with other SABIC® PE resins in both blown and cast film applications.

SABIC® LLDPE 218BE

Description

Ashby charts

Lectura sugerida

Propiedades