SABIC® LLDPE 324CE

Want to keep this datasheet? Save it now in your required format

Description

SABIC® LLDPE 324CE is a Linear Low Density Polyethylene natural resin typically used for wire and cable applications. SABIC® LLDPE 324CE contains a low level of antioxidants and does not contain any antiblock and/or slip agents. It also exhibits good Environmental Stress Crack Resistance (ESCR). Sufficient Cu-inhibitor should be added to meet specific ageing requirements. For jacketing applications, addition of Carbon Black or UV stabilizer is required. Applications - Telecommunication and Power cable (LV, MV, HV) jacketing. - Halogen-free flame retardant (HFFR) compounds. - One-step or two-steps silane crosslinkable for cable insulation. This product is not intended for and must not be used in any pharmaceutical/medical applications. Mechanical and electrical properties. Test specimens were prepared by compression moulding according to ASTM D 4703.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	0.92 g/cm³ Show Material materials with Densidad of 0.92 g/cm³	ASTM D1505

Mecánica

Property	Temperature	Value	Comment
Dureza Shore D	23.0 °C	53 [-] Show Material materials with Dureza Shore D of 53 [-]	ISO 868

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica	23.0 °C	2.2 [-] Show Material materials with Constante dieléctrica of 2.2 [-]	ASTM D150 \| at 60 Hz
Factor de disipación	23.0 °C	5E-4 [-] Show Material materials with Factor de disipación of 5E-4 [-]	ASTM D150 \| at 60 Hz
Resistividad eléctrica	23.0 °C	8.50E+13 Ω·m Show Material materials with Resistividad eléctrica of 8.50E+13 Ω·m	ASTM D257

Technological properties

Property
Application areas	It is used for wire and cable applications (telecommunication and power cable (LV, MV, HV) jacketing, halogen-free flame retardant (HFFR) compounds, one-step or two-steps silane crosslinkable for cable insulation).

SABIC® LLDPE 324CE

Description

Ashby charts

Lectura sugerida

Propiedades