SABIC® PP 412MN40

Want to keep this datasheet? Save it now in your required format

Description

SABIC® PP 412MN40 is a multi-purpose grade with good flow properties, combining stiffness and good balance in impact strength. The material has a very low tendency for warpage and is typically used for the production of thin wall packaging articles. Cycle times can be very short. It is formulated with a combined processing and antistatic additive package. This grade is widely applied in thin wall technical injection moulded articles and thin-walled containers, in particular where dimensional stability is important. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) / IMDS 80775790

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	0.91 g/cm³ Show Material materials with Densidad of 0.91 g/cm³	ASTM D1505

Mecánica

Property	Temperature	Value	Comment
Dureza Shore D	23.0 °C	63 [-] Show Material materials with Dureza Shore D of 63 [-]	ISO 868

Technological properties

Property
Application areas	It is typically used for the production of thin wall packaging articles.

SABIC® PP 412MN40

Description

Ashby charts

Lectura sugerida

Propiedades