Propiedades
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Densidad | 23.0 °C | 1.27 g/cm³ Show Material materials with Densidad of 1.27 g/cm³ | ASTM D 792 |
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongación | 23.0 °C | 10.8 % Show Material materials with Elongación of 10.8 % | ISO 527 | 50 mm/min |
Elongation at yield | 23.0 °C | 3 % Show Material materials with Elongation at yield of 3 % | ISO 527 | 50 mm/min |
Límite elástico | 23.0 °C | 20 MPa Show Material materials with Límite elástico of 20 MPa | ISO 527 | 50 mm/min |
Módulo de flexión | 23.0 °C | 3.27 GPa Show Material materials with Módulo de flexión of 3.27 GPa | ISO 178 | 2 mm/min, 64mm |
Módulo elástico | 23.0 °C | 2.45 GPa Show Material materials with Módulo elástico of 2.45 GPa | ISO 527 | 1 mm/min |
Resistencia a la tracción | 23.0 °C | 14 MPa Show Material materials with Resistencia a la tracción of 14 MPa | ISO 527 | 50 mm/min, 1A |
Resistencia al choque, ensayo Charpy entallado | -30.0 °C | 2 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 2 kJ/m² | ISO 179/1eA |
23.0 °C | 8 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 8 kJ/m² | ISO 179/1eA | |
Resistencia al choque, ensayo Izod entallado | -30.0 °C | 2 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod entallado of 2 kJ/m² | ISO 180/1A |
23.0 °C | 7 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod entallado of 7 kJ/m² | ISO 180/1A | |
Aplicaciones térmicas
| Property | Value | Comment |
|---|---|---|
Heat deflection temperature, 1.80 MPa | 124 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 124 °C | ISO 75-1&2 | 1.8 MPa |
Temperatura de reblandecimiento Vicat | 142 °C Show Material materials with Temperatura de reblandecimiento Vicat of 142 °C | ISO 306 | 10N, 50°C/hr |
Rheological Properties
| Property | Value | Comment |
|---|---|---|
Velocidad de flujo de la masa derretida | 3 g/10min Show Material materials with Velocidad de flujo de la masa derretida of 3 g/10min | ISO 1133 | 230°C/2.16 kg |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Under the hood | |
| Fillers | Talc | |
| Processing methods | Drying Temperature: 80-100°C, Drying Time: 2-4hrs, Melt Temperature: 210-270°C, Nozzle Temperature: 210-270°C, Front - Zone 3 Temperature: 210-270°C, Middle - Zone 2 Temperature: 200-250°C, Rear - Zone 1 Temperature: 190-230°C, Mold Temperature: 15-60°C, Back Pressure: 1-1.5MPa | |