CYCOLOY™ FR Resins C2950

Want to keep this datasheet? Save it now in your required format

Description

CYCOLOY C2950 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) resin is a standard high heat grade that can be injection molded. This non-chlorinated, non-brominated flame retardant high heat PC/ABS has a UL V0 & 5VB flame rating. CYCOLOY C2950 resin is an excellent candidate for a wide variety of applications including appliances, lighting and electrical.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueComment

Absorción de agua

23.0 °C

0.2 %

Show Material materials with Absorción de agua of 0.2 %

ISO 62 | 23°C, 50% RH

Densidad

23.0 °C

1.17 g/cm³

Show Material materials with Densidad of 1.17 g/cm³

ISO 1183

Mecánica

PropertyTemperatureValueComment

Elongación

23.0 °C

65 %

Show Material materials with Elongación of 65 %

ISO 527 | 5 mm/min

Elongation at yield

23.0 °C

4 %

Show Material materials with Elongation at yield of 4 %

ISO 527 | 50 mm/min

Flexural yield strength

23.0 °C

90 MPa

Show Material materials with Flexural yield strength of 90 MPa

ISO 178 | 2 mm/min

Hardness, Ball Indentation

23.0 °C

116 MPa

Show Material materials with Hardness, Ball Indentation of 116 MPa

ISO 2039-1

Hardness, Rockwell R

23.0 °C

123 [-]

Show Material materials with Hardness, Rockwell R of 123 [-]

ISO 2039-2

Límite elástico

23.0 °C

60 MPa

Show Material materials with Límite elástico of 60 MPa

ISO 527 | 50 mm/min

Módulo de flexión

23.0 °C

2.7 GPa

Show Material materials with Módulo de flexión of 2.7 GPa

ISO 178 | 2 mm/min

Módulo elástico

23.0 °C

2.8 GPa

Show Material materials with Módulo elástico of 2.8 GPa

ISO 527 | 1 mm/min

Resistencia a la tracción

23.0 °C

50 MPa

Show Material materials with Resistencia a la tracción of 50 MPa

ISO 527 | 50 mm/min

Resistencia al choque, ensayo Charpy entallado

-30.0 °C

15 kJ/m²

Show Material materials with Resistencia al choque, ensayo Charpy entallado of 15 kJ/m²

ISO 179/1eA

23.0 °C

45 kJ/m²

Show Material materials with Resistencia al choque, ensayo Charpy entallado of 45 kJ/m²

ISO 179/1eA

Resistencia al choque, ensayo Izod entallado

-30.0 °C

14 kJ/m²

Show Material materials with Resistencia al choque, ensayo Izod entallado of 14 kJ/m²

ISO 180/1A

23.0 °C

44 kJ/m²

Show Material materials with Resistencia al choque, ensayo Izod entallado of 44 kJ/m²

ISO 180/1A

Unlock all property charts

Resistencia al choque, ensayo Charpy no entallado

No Break @ 23,-30°C | ISO 179/1eU

Resistencia al choque, ensayo Izod no entallado

No Break @ 23,-30°C| ISO 180/1U

Aplicaciones térmicas

PropertyTemperatureValueComment

Coeficiente de dilatación térmica

23.0 °C

8E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 8E-5 1/K

ISO 11359-2 | 23°C to 60°C

Coeficiente de dilatación térmica transversal

23.0 °C

8E-5 1/K

Show Material materials with Coeficiente de dilatación térmica transversal of 8E-5 1/K

ISO 11359-2 | 23°C to 60°C

Conductividad térmica

23.0 °C

0.2 W/(m·K)

Show Material materials with Conductividad térmica of 0.2 W/(m·K)

ISO 8302

Heat deflection temperature, 1.80 MPa

90 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 90 °C

ISO 75/Ae | 1.8 MPa

Relative temperature index, electrical

85 °C

Show Material materials with Relative temperature index, electrical of 85 °C

UL 746B

Relative temperature index, mechanical impact

85 °C

Show Material materials with Relative temperature index, mechanical impact of 85 °C

UL 746B

Relative temperature index, mechanical strength

85 °C

Show Material materials with Relative temperature index, mechanical strength of 85 °C

UL 746B

Temperatura de reblandecimiento Vicat

112 °C

Show Material materials with Temperatura de reblandecimiento Vicat of 112 °C

ISO 306 | Rate B/120

Inflamabilidad

UL Recognized, 94-5VB Flame Class Rating | 2.5mm | UL 94

Eléctrico

PropertyTemperatureValueComment

Constante dieléctrica

23.0 °C

2.8 [-]

Show Material materials with Constante dieléctrica of 2.8 [-]

IEC 60250 | at 50/60 Hz

Factor de disipación

23.0 °C

6E-3 [-]

Show Material materials with Factor de disipación of 6E-3 [-]

IEC 60250 | at 1 MHz

Rigidez dieléctrica

23.0 °C

17 kV/mm

Show Material materials with Rigidez dieléctrica of 17 kV/mm

IEC 60243-1 | in oil, 3.2 mm

Índice de seguimiento comparativo

23.0 °C

600 V

Show Material materials with Índice de seguimiento comparativo of 600 V

IEC 60112

Rheological Properties

PropertyTemperatureValueComment

Contracción

23.0 °C

0.4 - 0.6 %

Show Material materials with Contracción of 0.4 - 0.6 %

SABIC method

Velocidad de flujo del volumen derretido

12 cm³/10min

Show Material materials with Velocidad de flujo del volumen derretido of 12 cm³/10min

ISO 1133 | 260°C/2.16 kg

Technological properties

Property
Application areas

Air Conditioning,Air Filtration,ATM/Ticket Machine,Audio,Auto Aftermarket,Building Accessory,Building Element,Circuit Protection,City,Data Management,Data Transfer,Displays,Document Handling,Electronic Components,Enclosure/Housing/Cover,Enclosures,Energy Management,EV Infrastructure,Fluid Delivery,Food Processor,Food Transportation,Freezer,Furnace/Heater,Heavy Vehicles,Individual Equiptment,Lab Ware and Clinical Diagnostics,Laundry Dryer,Lawn/Garden,LED Lighting,Medical Device,Medical Facility Infrastructure,Meter Gas,Monitoring and Imaging,Motorcycle,Non-LED Lighting,Personal Care,Personal Computing,Photovoltaic Components,Power Manangement,Refrigerator,Renal and Blood Handling,Respiratory,Security/Detection,Small Appliance,Surgical Devices,Vacuum Cleaner,Washing Machine,Wearables,Wireless Communications,Wiring Devices

Processing methods

Drying Temperature: 90-100°C, Drying Time: 2-4hrs, Maximum Moisture Content: 0.02%, Melt Temperature: 250-280°C, Nozzle Temperature: 230-270°C, Front - Zone 3 Temperature: 240-280°C, Middle - Zone 2 Temperature: 230-270°C, Rear - Zone 1 Temperature: 210-240°C, Hopper Temperature: 60-80°C, Mold Temperature: 60-90°C