Propiedades
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Absorción de agua | 23.0 °C | 0.07 % Show Material materials with Absorción de agua of 0.07 % | ISO 62 | 23°C, 50% RH |
Densidad | 23.0 °C | 1.53 g/cm³ Show Material materials with Densidad of 1.53 g/cm³ | ASTM D 792 |
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongación | 23.0 °C | 2 % Show Material materials with Elongación of 2 % | ASTM D 638 | Type I, 5 mm/min |
Elongation at yield | 23.0 °C | 2 % Show Material materials with Elongation at yield of 2 % | ASTM D 638 | Type I, 5 mm/min |
Flexural strain | 23.0 °C | 3 % Show Material materials with Flexural strain of 3 % | ISO 178 | 2 mm/min |
Flexural yield strength | 23.0 °C | 155 MPa Show Material materials with Flexural yield strength of 155 MPa | ISO 178 | 2 mm/min |
Hardness, Ball Indentation | 23.0 °C | 218 MPa Show Material materials with Hardness, Ball Indentation of 218 MPa | ISO 2039-1 |
Hardness, Rockwell R | 23.0 °C | 120 [-] Show Material materials with Hardness, Rockwell R of 120 [-] | ISO 2039-2 |
Impact strength, Izod notched, ASTM | -30.0 °C | 45 J/m Show Material materials with Impact strength, Izod notched, ASTM of 45 J/m | ASTM D 256 |
23.0 °C | 49 J/m Show Material materials with Impact strength, Izod notched, ASTM of 49 J/m | ASTM D 256 | |
Impact strength, Izod unnotched, ASTM | -30.0 °C | 275 J/m Show Material materials with Impact strength, Izod unnotched, ASTM of 275 J/m | ASTM D 4812 |
23.0 °C | 500 J/m Show Material materials with Impact strength, Izod unnotched, ASTM of 500 J/m | ASTM D 4812 | |
Límite elástico | 23.0 °C | 93 MPa Show Material materials with Límite elástico of 93 MPa | ASTM D 638 | Type I, 5 mm/min |
Módulo de flexión | 23.0 °C | 6.1 GPa Show Material materials with Módulo de flexión of 6.1 GPa | ISO 178 | 2 mm/min |
Módulo elástico | 23.0 °C | 7.1 GPa Show Material materials with Módulo elástico of 7.1 GPa | ASTM D 638 | 5 mm/min |
Resistencia a la flexión | 23.0 °C | 155 MPa Show Material materials with Resistencia a la flexión of 155 MPa | ISO 178 |
Resistencia a la tracción | 23.0 °C | 93 MPa Show Material materials with Resistencia a la tracción of 93 MPa | ASTM D 638 | Type I, 5 mm/min |
Resistencia al choque, ensayo Charpy entallado | -30.0 °C | 5 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 5 kJ/m² | ISO 179/2C |
23.0 °C | 5 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 5 kJ/m² | ISO 179/2C | |
Resistencia al choque, ensayo Charpy no entallado | -30.0 °C | 20 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 20 kJ/m² | ISO 179/1eU |
23.0 °C | 25 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 25 kJ/m² | ISO 179/1eU | |
Resistencia al choque, ensayo Izod entallado | -30.0 °C | 5 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod entallado of 5 kJ/m² | ISO 180/1A |
23.0 °C | 5 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod entallado of 5 kJ/m² | ISO 180/1A | |
Resistencia al choque, ensayo Izod no entallado | -30.0 °C | 20 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod no entallado of 20 kJ/m² | ISO 180/1U |
23.0 °C | 20 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod no entallado of 20 kJ/m² | ISO 180/1U | |
Aplicaciones térmicas
| Property | Temperature | Value | Comment | ||
|---|---|---|---|---|---|
Coeficiente de dilatación térmica | 23.0 °C | 2.57E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 2.57E-5 1/K | ISO 11359-2 | 23°C to 150°C | ||
Coeficiente de dilatación térmica transversal | 23.0 °C | 1.49E-4 1/K Show Material materials with Coeficiente de dilatación térmica transversal of 1.49E-4 1/K | ISO 11359-2 | 23°C to 150°C | ||
Conductividad térmica | 23.0 °C | 0.19 W/(m·K) Show Material materials with Conductividad térmica of 0.19 W/(m·K) | ISO 8302 | ||
Heat deflection temperature, 1.80 MPa | 190 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 190 °C | ASTM D 648 | 1.82 MPa, 3.2mm, unannealed | |||
Relative temperature index, electrical | 120 °C Show Material materials with Relative temperature index, electrical of 120 °C | UL 746B | |||
Relative temperature index, mechanical impact | 120 °C Show Material materials with Relative temperature index, mechanical impact of 120 °C | UL 746B | |||
Relative temperature index, mechanical strength | 140 °C Show Material materials with Relative temperature index, mechanical strength of 140 °C | UL 746B | |||
Temperatura de reblandecimiento Vicat | 199 °C Show Material materials with Temperatura de reblandecimiento Vicat of 199 °C | ASTM D 1525 | Rate B/50 | |||
Inflamabilidad | UL Recognized, 94-5VA Flame Class Rating | 3.0mm | UL 94 | ||||
Eléctrico
| Property | Temperature | Value | Comment |
|---|---|---|---|
Constante dieléctrica | 23.0 °C | 3.4 [-] Show Material materials with Constante dieléctrica of 3.4 [-] | ASTM D 150 | at 1 MHz |
Factor de disipación | 23.0 °C | 0.02 [-] Show Material materials with Factor de disipación of 0.02 [-] | ASTM D 150 | at 1 MHz |
Resistividad eléctrica | 23.0 °C | 1.00E+13 Ω·m Show Material materials with Resistividad eléctrica of 1.00E+13 Ω·m | ASTM D 257 |
Rigidez dieléctrica | 23.0 °C | 16 kV/mm Show Material materials with Rigidez dieléctrica of 16 kV/mm | ASTM D 149 | in oil, 3.2 mm |
Índice de seguimiento comparativo | 23.0 °C | 175 V Show Material materials with Índice de seguimiento comparativo of 175 V | IEC 60112 |
Rheological Properties
| Property | Temperature | Value | Comment |
|---|---|---|---|
Contracción | 23.0 °C | 0.5 - 0.8 % Show Material materials with Contracción of 0.5 - 0.8 % | SABIC method |
Contracción transversal | 23.0 °C | 0.6 - 0.9 % Show Material materials with Contracción transversal of 0.6 - 0.9 % | SABIC method |
Melt viscosity | 260.0 °C | 105 Pa·s Show Material materials with Melt viscosity of 105 Pa·s | ISO 11443 | 1500 sec⁻¹ |
Velocidad de flujo de la masa derretida | 90 g/10min Show Material materials with Velocidad de flujo de la masa derretida of 90 g/10min | ASTM D 1238 | 266°C/5.0 kg | |
Velocidad de flujo del volumen derretido | 70 cm³/10min Show Material materials with Velocidad de flujo del volumen derretido of 70 cm³/10min | ISO 1133 | 265°C/5.0 kg |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Air Conditioning,ATM/Ticket Machine,Audio,Auto Aftermarket,Building Accessory,Circuit Protection,Coffee Maker/Espresso Machine,Data Management,Data Transfer,Displays,Document Handling,Electronic Components,Enclosure/Housing/Cover,Enclosures,Energy Management,EV Infrastructure,Food Container,Food Processor,Gas/Electric Oven,Heavy Vehicles,Industrial Material Handling,Laundry Dryer,LED Lighting,Medical Device,Microwave Oven,Monitoring and Imaging,Motorcycle,Non-LED Lighting,Personal Computing,Photovoltaic Components,Power Manangement,Recreational Vehicle,Respiratory,Semiconductor,Small Appliance,Surgical Devices,Swimming Pool/Spa,Washing Machine,Water Treatment/Filtration,Wheel Cover,Wireless Communications,Wiring Devices,Wire & cable | |
| Fillers | 17% Glass Fiber | |
| Processing methods | Drying Temperature: 110-120°C, Drying Time: 2-4hrs, Maximum Moisture Content: 0.02%, Melt Temperature: 250-270°C, Nozzle Temperature: 240-260°C, Front - Zone 3 Temperature: 245-265°C, Middle - Zone 2 Temperature: 240-255°C, Rear - Zone 1 Temperature: 230-245°C, Hopper Temperature: 40-60°C, Mold Temperature: 40-100°C | |