SABIC® LDPE PCG06

Want to keep this datasheet? Save it now in your required format

Description

SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG06 is an additive-free grade with high purity and very low migration levels. It is typically used for semi-rigid IV containers for Large Volume Parenterals (LVP) obtained by Blow Fill Seal (BFS) process. Compliance to Regulations SABIC® LDPE PCG06 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Temperature	Value	Comment
Coefficient of friction		1 [-] Show Material materials with Coefficient of friction of 1 [-]	ASTM D1894
Densidad	23.0 °C	0.93 g/cm³ Show Material materials with Densidad of 0.93 g/cm³	ASTM D1505

Mecánica

Property	Temperature	Value	Comment
Resistencia a desgarros	23.0 °C	45 kN/m Show Material materials with Resistencia a desgarros of 45 kN/m	ISO 6383-2
Resistencia a desgarros transversal	23.0 °C	35 kN/m Show Material materials with Resistencia a desgarros transversal of 35 kN/m	ISO 6383-2

Óptico

Property	Value	Comment
Turbidez	6 % Show Material materials with Turbidez of 6 %	ASTM D1003

Technological properties

Property
Application areas	It is typically used for semi-rigid IV containers for Large Volume Parenterals (LVP) obtained by Blow Fill Seal (BFS) process.

SABIC® LDPE PCG06

Description

Ashby charts

Lectura sugerida

Propiedades