Crastin® HR5330HFS BK591

Nombres alternativos y comerciales
PBT-I-GF30
Want to keep this datasheet? Save it now in your required format

Description

Crastin® HR5330HFS BK591 is a 30% Glass Reinforced Polybutylene Terephthalate with high flow, moderately toughened, and hydrolysis resistant (HR) for injection molding.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueComment

Absorción de agua

23.0 °C

0.35 %

Show Material materials with Absorción de agua of 0.35 %

Sim. to ISO 62 | 80mil

Densidad

23.0 °C

1.5 g/cm³

Show Material materials with Densidad of 1.5 g/cm³

ISO 1183

Mecánica

PropertyTemperatureValueComment

Coeficiente de Poisson

23.0 °C

0.34 [-]

Show Material materials with Coeficiente de Poisson of 0.34 [-]

Elongación

23.0 °C

3.2 %

Show Material materials with Elongación of 3.2 %

ISO 527-1/-2

Módulo elástico

23.0 °C

8.5 GPa

Show Material materials with Módulo elástico of 8.5 GPa

ISO 527-1/-2

Resistencia a la flexión

23.0 °C

180 MPa

Show Material materials with Resistencia a la flexión of 180 MPa

ISO 178

Resistencia a la tracción

23.0 °C

120 MPa

Show Material materials with Resistencia a la tracción of 120 MPa

ISO 527-1/-2

Resistencia al choque, ensayo Charpy entallado

23.0 °C

12 kJ/m²

Show Material materials with Resistencia al choque, ensayo Charpy entallado of 12 kJ/m²

ISO 179/1eA

Resistencia al choque, ensayo Charpy no entallado

23.0 °C

70 kJ/m²

Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 70 kJ/m²

ISO 179/1eU

Aplicaciones térmicas

PropertyTemperatureValueComment

Coeficiente de dilatación térmica

23.0 °C

2.2E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.2E-5 1/K

ISO 11359-1/-2

Coeficiente de dilatación térmica transversal

23.0 °C

1.9E-4 1/K

Show Material materials with Coeficiente de dilatación térmica transversal of 1.9E-4 1/K

ISO 11359-1/-2

Heat deflection temperature, 1.80 MPa

205 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 205 °C

ISO 75-1/-2

Relative temperature index, mechanical strength

192 °C

Show Material materials with Relative temperature index, mechanical strength of 192 °C

IEC 60216-1 | 5000 hours

Temperatura de fusión

225 °C

Show Material materials with Temperatura de fusión of 225 °C

ISO 11357-1/-3 | 18°F/min

Temperatura de transición del vidrio

65 °C

Show Material materials with Temperatura de transición del vidrio of 65 °C

ISO 11357-1/-2 | 18°F/min

Inflamabilidad

Burning Behav. at thickness h: HB class, Thickness tested: 0.75 mm, UL recognition: yes -, Oxygen index: 20 %, FMVSS Class: B -, Burning rate, Thickness 1 mm: 30 mm/min

Eléctrico

PropertyTemperatureValueComment

Rigidez dieléctrica

23.0 °C

34 kV/mm

Show Material materials with Rigidez dieléctrica of 34 kV/mm

IEC 60243-1

Surface resistivity

23.0 °C

1.00E+15 Ω/sq

Show Material materials with Surface resistivity of 1.00E+15 Ω/sq

min. | IEC 62631-3-2

Volume resistivity

23.0 °C

1.00E+15 Ω·cm

Show Material materials with Volume resistivity of 1.00E+15 Ω·cm

min. | IEC 62631-3-1

Índice de seguimiento comparativo

23.0 °C

1 V

Show Material materials with Índice de seguimiento comparativo of 1 V

UL 746A

Rheological Properties

PropertyTemperatureValueComment

Contracción

23.0 °C

0.3 %

Show Material materials with Contracción of 0.3 %

ISO 294-4, 2577

Contracción transversal

23.0 °C

1.1 %

Show Material materials with Contracción transversal of 1.1 %

ISO 294-4, 2577

Melt viscosity

250.0 °C

230 Pa·s

Show Material materials with Melt viscosity of 230 Pa·s

ISO 11443 | @ 1000 sec-1, 250°C

Velocidad de flujo de la masa derretida

13 g/10min

Show Material materials with Velocidad de flujo de la masa derretida of 13 g/10min

ISO 1133 | 250°C/2.16kg

Velocidad de flujo del volumen derretido

8 cm³/10min

Show Material materials with Velocidad de flujo del volumen derretido of 8 cm³/10min

ISO 1133

Technological properties

Property
Fillers

30% Glass Fiber

Processing methods

Drying Recommended: yes, Drying Temperature: 120°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.04%, Melt Temperature Optimum: 250°C, Min. melt temperature: 240°C, Max. melt temperature: 260°C, Mold Temperature Optimum: 80°C, Min. mold temperature: 30°C, Max. mold temperature: 130°C, Hold pressure range: ≥60MPa, Hold pressure time: 3s/mm, Back pressure: As low as possible, Ejection temperature: 170°C