Delrin® 100 NC010

Want to keep this datasheet? Save it now in your required format

Description

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.27 % Show Material materials with Absorción de agua of 0.27 %	Sim. to ISO 62 \| Immersion 24h
Densidad	23.0 °C	1.42 g/cm³ Show Material materials with Densidad of 1.42 g/cm³	ISO 1183

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.37 [-] Show Material materials with Coeficiente de Poisson of 0.37 [-]
Dureza Rockwell M	23.0 °C	90 [-] Show Material materials with Dureza Rockwell M of 90 [-]	ISO 2039-2
Elongación	23.0 °C	45 % Show Material materials with Elongación of 45 %	ISO 527-1/-2
Elongation at yield	23.0 °C	26 % Show Material materials with Elongation at yield of 26 %	ISO 527-1/-2
Hardness, Ball Indentation	23.0 °C	173 MPa Show Material materials with Hardness, Ball Indentation of 173 MPa	ISO 2039-1
Hardness, Rockwell R	23.0 °C	121 [-] Show Material materials with Hardness, Rockwell R of 121 [-]	ISO 2039-2
Límite elástico	23.0 °C	71 MPa Show Material materials with Límite elástico of 71 MPa	ISO 527-1/-2
Módulo de flexión	23.0 °C	2.8 GPa Show Material materials with Módulo de flexión of 2.8 GPa	ISO 178
Módulo elástico	23.0 °C	2.9 GPa Show Material materials with Módulo elástico of 2.9 GPa	ISO 527-1/-2
Resistencia a la compresión	23.0 °C	110 MPa Show Material materials with Resistencia a la compresión of 110 MPa	ISO 604
Resistencia a la flexión	23.0 °C	93 MPa Show Material materials with Resistencia a la flexión of 93 MPa	ISO 178
Resistencia al choque, ensayo Charpy entallado	-6.0 °C	13 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 13 kJ/m²	ISO 179/1eA
	23.0 °C	15 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 15 kJ/m²	ISO 179/1eA

Resistencia al choque, ensayo Charpy no entallado	-6.0 °C	425 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 425 kJ/m²	No Break @ 23°C, ISO 179/1eU
Resistencia al choque, ensayo Izod no entallado	-40.0 °C	13 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod no entallado of 13 kJ/m²	ISO 180/1A
	23.0 °C	14 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod no entallado of 14 kJ/m²	ISO 180/1A
	Unlock all property charts

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	3000 J/(kg·K) Show Material materials with Calor específico of 3000 J/(kg·K)	of melt
Coeficiente de dilatación térmica	23.0 °C	1E-4 1/K Show Material materials with Coeficiente de dilatación térmica of 1E-4 1/K	ISO 11359-1/-2 \| -40 - 23°C
Coeficiente de dilatación térmica transversal	23.0 °C	1E-4 1/K Show Material materials with Coeficiente de dilatación térmica transversal of 1E-4 1/K	ISO 11359-1/-2 \| -40 - 23°C
Difusividad térmica	23.0 °C	0 mm²/s Show Material materials with Difusividad térmica of 0 mm²/s
Heat deflection temperature, 0.45 MPa		160 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 160 °C	ISO 75-1/-2
Heat deflection temperature, 1.80 MPa		115 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 115 °C	ISO 75-1/-2 \| annealed
Relative temperature index, electrical		105 °C Show Material materials with Relative temperature index, electrical of 105 °C	UL 746B \| 240mil
Relative temperature index, mechanical impact		85 °C Show Material materials with Relative temperature index, mechanical impact of 85 °C	UL 746B \| 240mil
Relative temperature index, mechanical strength		125 °C Show Material materials with Relative temperature index, mechanical strength of 125 °C	IEC 60216-1 \| 5000 hours
Temperatura de fusión		178 °C Show Material materials with Temperatura de fusión of 178 °C	ISO 11357-1/-3 \| 18°F/min
Temperatura de reblandecimiento Vicat		175 °C Show Material materials with Temperatura de reblandecimiento Vicat of 175 °C	ISO 306 \| 90°F, 2 lbf
Inflamabilidad	Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: HB class, Thickness tested: 0.8 mm, UL recognition: yes -, Glow Wire Flammability Index, 40mil: 550 °C, Glow Wire Flammability Index, 80mil: 550 °C, Glow Wire Flammability Index, 120mil: 550 °C, Glow Wire Ignition Temperature, 30mil: 550 °C, Glow Wire Ignition Temperature, 15mil: 550 °C, Glow Wire Ignition Temperature, 40mil: 550 °C, Glow Wire Ignition Temperature, 60mil: 550 °C, Glow Wire Ignition Temperature, 80mil: 550 °C, Glow Wire Ignition Temperature, 120mil: 550 °C, FMVSS Class: B -, Burning rate, Thickness 1 mm: 40 mm/min

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica, 1 MHz	23.0 °C	3.8 [-] Show Material materials with Constante dieléctrica, 1 MHz of 3.8 [-]	IEC 62631-2-1
Constante dieléctrica, 100 Hz	23.0 °C	3.9 [-] Show Material materials with Constante dieléctrica, 100 Hz of 3.9 [-]	IEC 62631-2-1
Dissipation factor, 100Hz	23.0 °C	1E-3 [-] Show Material materials with Dissipation factor, 100Hz of 1E-3 [-]	IEC 62631-2-1
Dissipation factor, 1MHz	23.0 °C	5.5E-3 [-] Show Material materials with Dissipation factor, 1MHz of 5.5E-3 [-]	IEC 62631-2-1
Rigidez dieléctrica	23.0 °C	41 kV/mm Show Material materials with Rigidez dieléctrica of 41 kV/mm	IEC 60243-1
Surface resistivity	23.0 °C	3.00E+13 Ω/sq Show Material materials with Surface resistivity of 3.00E+13 Ω/sq	IEC 62631-3-2
Volume resistivity	23.0 °C	1.00E+15 Ω·cm Show Material materials with Volume resistivity of 1.00E+15 Ω·cm	min. \| IEC 62631-3-1
Índice de seguimiento comparativo	23.0 °C	600 V Show Material materials with Índice de seguimiento comparativo of 600 V	IEC 60112

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	3 % Show Material materials with Contracción of 3 %	ISO 294-4 \| Annealed
Contracción transversal	23.0 °C	2.4 % Show Material materials with Contracción transversal of 2.4 %	ISO 294-4 \| Annealed
Velocidad de flujo de la masa derretida		2.2 g/10min Show Material materials with Velocidad de flujo de la masa derretida of 2.2 g/10min	ISO 1133 \| 190°C/2.16kg
Velocidad de flujo del volumen derretido		1.9 cm³/10min Show Material materials with Velocidad de flujo del volumen derretido of 1.9 cm³/10min	ISO 1133

Technological properties

Property
Processing methods	Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 215°C, Min. melt temperature: 210°C, Max. melt temperature: 220°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 90°C, Min. mold temperature: 80°C, Max. mold temperature: 100°C, Hold pressure range: 90-110MPa, Hold pressure time: 8s/mm

Delrin® 100 NC010

Description

Ashby charts

Lectura sugerida

Propiedades