Crastin® SK602 NC010

Nombres alternativos y comerciales
PBT-GF15

Want to keep this datasheet? Save it now in your required format

Description

Common features of Crastin® thermoplastic polyester resin include mechanical and physical properties such as stiffness and toughness, heat resistance, friction and wear resistance, excellent surface finishes and good colourability. Crastin® thermoplastic polyester resin has excellent electrical insulation characteristics and high arc-resistant grades are available. Many flame retardant grades have UL recognition (class V-0). Crastin® thermoplastic polyester resin typically has high chemical and heat ageing resistance. The good melt stability of Crastin® thermoplastic polyester resin normally enables the recycling of properly handled production waste.If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Crastin® thermoplastic polyester resin typically is used in demanding applications in the electronics, electrical, automotive, mechanical engineering, chemical, domestic appliances and sporting goods industry.Crastin® SK602 NC010 is a 15% glass fiber reinforced, lubricated polybutylene terephthalate resin for injection molding.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.42 % Show Material materials with Absorción de agua of 0.42 %	Sim. to ISO 62 \| 80mil
Densidad	23.0 °C	1.41 g/cm³ Show Material materials with Densidad of 1.41 g/cm³	ISO 1183

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.35 [-] Show Material materials with Coeficiente de Poisson of 0.35 [-]
Elongación	23.0 °C	3.5 % Show Material materials with Elongación of 3.5 %	ISO 527-1/-2
Módulo de flexión	23.0 °C	5.2 GPa Show Material materials with Módulo de flexión of 5.2 GPa	ISO 178
Módulo elástico	23.0 °C	5.8 GPa Show Material materials with Módulo elástico of 5.8 GPa	ISO 527-1/-2
Resistencia a la flexión	23.0 °C	160 MPa Show Material materials with Resistencia a la flexión of 160 MPa	ISO 178
Resistencia a la tracción	23.0 °C	109 MPa Show Material materials with Resistencia a la tracción of 109 MPa	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-40.0 °C	7 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 7 kJ/m²	ISO 179/1eA
	-6.0 °C	7 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 7 kJ/m²	ISO 179/1eA
	23.0 °C	7 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 7 kJ/m²	ISO 179/1eA

Resistencia al choque, ensayo Charpy no entallado	-40.0 °C	40 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 40 kJ/m²	ISO 179/1eU
	-6.0 °C	45 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 45 kJ/m²	ISO 179/1eU
	23.0 °C	45 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 45 kJ/m²	ISO 179/1eU
	Unlock all property charts
Resistencia al choque, ensayo Izod entallado	-40.0 °C	30 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod entallado of 30 kJ/m²	ISO 180/1U
	-30.0 °C	50 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod entallado of 50 kJ/m²	ISO 180/1U
	23.0 °C	50 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod entallado of 50 kJ/m²	ISO 180/1U
	Unlock all property charts
Resistencia al choque, ensayo Izod no entallado	-40.0 °C	6 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod no entallado of 6 kJ/m²	ISO 180/1A
	-30.0 °C	6 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod no entallado of 6 kJ/m²	ISO 180/1A
	23.0 °C	6.5 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod no entallado of 6.5 kJ/m²	ISO 180/1A
	Unlock all property charts
Resistencia al cizallamiento	23.0 °C	50 MPa Show Material materials with Resistencia al cizallamiento of 50 MPa	ASTM D 732

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	1900 J/(kg·K) Show Material materials with Calor específico of 1900 J/(kg·K)	of melt
Coeficiente de dilatación térmica	23.0 °C	5E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 5E-5 1/K	ISO 11359-1/-2
Coeficiente de dilatación térmica transversal	23.0 °C	1.1E-4 1/K Show Material materials with Coeficiente de dilatación térmica transversal of 1.1E-4 1/K	ISO 11359-1/-2
Heat deflection temperature, 0.45 MPa		220 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 220 °C	ISO 75-1/-2
Heat deflection temperature, 1.80 MPa		200 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 200 °C	ISO 75-1/-2
Relative temperature index, electrical		130 °C Show Material materials with Relative temperature index, electrical of 130 °C	UL 746B \| 240mil
Relative temperature index, mechanical impact		115 °C Show Material materials with Relative temperature index, mechanical impact of 115 °C	UL 746B \| 240mil
Relative temperature index, mechanical strength		120 °C Show Material materials with Relative temperature index, mechanical strength of 120 °C	UL 746B \| 240mil
Temperatura de fusión		225 °C Show Material materials with Temperatura de fusión of 225 °C	ISO 11357-1/-3 \| 18°F/min
Temperatura de reblandecimiento Vicat		205 °C Show Material materials with Temperatura de reblandecimiento Vicat of 205 °C	ISO 306 \| 90°F/h, 11 lbf
Temperatura de transición del vidrio		55 °C Show Material materials with Temperatura de transición del vidrio of 55 °C	ISO 11357-1/-2 \| 18°F/min
Inflamabilidad	Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: HB class, Thickness tested: 0.75 mm, UL recognition: yes -, Oxygen index: 19 %, Glow Wire Flammability Index, 120mil: 750 °C, Glow Wire Ignition Temperature, 30mil: 750 °C, Glow Wire Ignition Temperature, 40mil: 750 °C, Glow Wire Ignition Temperature, 60mil: 750 °C, Glow Wire Ignition Temperature, 80mil: 750 °C, Glow Wire Ignition Temperature, 120mil: 725 °C, FMVSS Class: B -, Burning rate, Thickness 1 mm: 30 mm/min

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica, 1 MHz	23.0 °C	3.5 [-] Show Material materials with Constante dieléctrica, 1 MHz of 3.5 [-]	IEC 62631-2-1
Constante dieléctrica, 100 Hz	23.0 °C	3.8 [-] Show Material materials with Constante dieléctrica, 100 Hz of 3.8 [-]	IEC 62631-2-1
Dissipation factor, 100Hz	23.0 °C	7E-4 [-] Show Material materials with Dissipation factor, 100Hz of 7E-4 [-]	IEC 62631-2-1
Dissipation factor, 1MHz	23.0 °C	0.02 [-] Show Material materials with Dissipation factor, 1MHz of 0.02 [-]	IEC 62631-2-1
Rigidez dieléctrica	23.0 °C	17 kV/mm Show Material materials with Rigidez dieléctrica of 17 kV/mm	IEC 60243-1 \| Short Time, 2mm
Surface resistivity	23.0 °C	1.00E+15 Ω/sq Show Material materials with Surface resistivity of 1.00E+15 Ω/sq	IEC 62631-3-2
Volume resistivity	23.0 °C	1.00E+15 Ω·cm Show Material materials with Volume resistivity of 1.00E+15 Ω·cm	min. \| IEC 62631-3-1
Índice de seguimiento comparativo	23.0 °C	350 V Show Material materials with Índice de seguimiento comparativo of 350 V	IEC 60112

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.4 % Show Material materials with Contracción of 0.4 %	ISO 294-4, 2577
Contracción transversal	23.0 °C	1.1 % Show Material materials with Contracción transversal of 1.1 %	ISO 294-4, 2577
Velocidad de flujo de la masa derretida		18 g/10min Show Material materials with Velocidad de flujo de la masa derretida of 18 g/10min	ISO 1133 \| 250°C/2.16kg
Velocidad de flujo del volumen derretido		15 cm³/10min Show Material materials with Velocidad de flujo del volumen derretido of 15 cm³/10min	ISO 1133

Technological properties

Property
Fillers	15% Glass Fiber
Processing methods	Drying Recommended: yes, Drying Temperature: 120°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.04%, Melt Temperature Optimum: 250°C, Min. melt temperature: 240°C, Max. melt temperature: 260°C, Mold Temperature Optimum: 80°C, Min. mold temperature: 30°C, Max. mold temperature: 130°C, Hold pressure range: ≥60MPa, Hold pressure time: 3s/mm, Back pressure: As low as possible, Ejection temperature: 170°C

Crastin® SK602 NC010

Description

Ashby charts

Lectura sugerida

Propiedades