Delrin® 911DP NC010

Want to keep this datasheet? Save it now in your required format

Description

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 911DP is a low viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage and fewer voids.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.9 % Show Material materials with Absorción de agua of 0.9 %	Sim. to ISO 62 \| 80mil
Densidad	23.0 °C	1.42 g/cm³ Show Material materials with Densidad of 1.42 g/cm³	ISO 1183

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.37 [-] Show Material materials with Coeficiente de Poisson of 0.37 [-]
Elongación	23.0 °C	20 % Show Material materials with Elongación of 20 %	ISO 527-1/-2
Elongation at yield	23.0 °C	10 % Show Material materials with Elongation at yield of 10 %	ISO 527-1/-2
Hardness, Ball Indentation	23.0 °C	175 MPa Show Material materials with Hardness, Ball Indentation of 175 MPa	ISO 2039-1
Límite elástico	23.0 °C	75 MPa Show Material materials with Límite elástico of 75 MPa	ISO 527-1/-2
Módulo de flexión	23.0 °C	3.3 GPa Show Material materials with Módulo de flexión of 3.3 GPa	ISO 178
Módulo elástico	23.0 °C	3.4 GPa Show Material materials with Módulo elástico of 3.4 GPa	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-6.0 °C	6 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 6 kJ/m²	ISO 179/1eA
	23.0 °C	6.5 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 6.5 kJ/m²	ISO 179/1eA

Resistencia al choque, ensayo Charpy no entallado	-6.0 °C	150 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 150 kJ/m²	ISO 179/1eU
	23.0 °C	160 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 160 kJ/m²	ISO 179/1eU
	Unlock all property charts

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	1E-4 1/K Show Material materials with Coeficiente de dilatación térmica of 1E-4 1/K	ISO 11359-1/-2
Coeficiente de dilatación térmica transversal	23.0 °C	1E-4 1/K Show Material materials with Coeficiente de dilatación térmica transversal of 1E-4 1/K	ISO 11359-1/-2
Heat deflection temperature, 0.45 MPa		163 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 163 °C	ISO 75-1/-2
Heat deflection temperature, 1.80 MPa		108 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 108 °C	ISO 75-1/-2
Relative temperature index, electrical		110 °C Show Material materials with Relative temperature index, electrical of 110 °C	UL 746B \| 120mil
Relative temperature index, mechanical impact		90 °C Show Material materials with Relative temperature index, mechanical impact of 90 °C	UL 746B \| 120mil
Relative temperature index, mechanical strength		95 °C Show Material materials with Relative temperature index, mechanical strength of 95 °C	UL 746B \| 120mil
Temperatura de fusión		178 °C Show Material materials with Temperatura de fusión of 178 °C	ISO 11357-1/-3 \| 18°F/min
Inflamabilidad	Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: HB class, Thickness tested: 0.8 mm, UL recognition: yes -, FMVSS Class: B -, Burning rate, Thickness 1 mm: 25 mm/min

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	1.9 % Show Material materials with Contracción of 1.9 %	ISO 294-4, 2577
Contracción transversal	23.0 °C	1.8 % Show Material materials with Contracción transversal of 1.8 %	ISO 294-4, 2577
Velocidad de flujo de la masa derretida		24 g/10min Show Material materials with Velocidad de flujo de la masa derretida of 24 g/10min	ISO 1133 \| 190°C/2.16kg
Velocidad de flujo del volumen derretido		21 cm³/10min Show Material materials with Velocidad de flujo del volumen derretido of 21 cm³/10min	ISO 1133

Technological properties

Property
Processing methods	Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 215°C, Min. melt temperature: 210°C, Max. melt temperature: 220°C, Mold Temperature Optimum: 90°C, Min. mold temperature: 80°C, Max. mold temperature: 100°C, Hold pressure range: 80-100MPa, Hold pressure time: 7.5s/mm

Delrin® 911DP NC010

Description

Ashby charts

Lectura sugerida

Propiedades