Rynite® 530 BK503

Nombres alternativos y comerciales
PET-GF30

Want to keep this datasheet? Save it now in your required format

Description

Common features of Rynite® thermoplastic polyester include mechanical and physical properties such as excellent balance of strength and stiffness, dimensional stability, creep resistance, heat resistance,high surface gloss and good inherent electrical properties at elevated temperature. It can be processed over a broad temperature range and has excellent flow properties. Rynite® thermoplastic polyester resins aretypically used in demanding applications in the automotive, electrical and electronics, appliances where they successfully replace metals and thermosets, as well as other thermoplastic polymers. Rynite® 530 BK503 is a 30% glass reinforced modified polyethylene terephthalate resin.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.05 % Show Material materials with Absorción de agua of 0.05 %	Sim. to ISO 62 \| Immersion 24h
Densidad	23.0 °C	1.56 g/cm³ Show Material materials with Densidad of 1.56 g/cm³	ISO 1183

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.34 [-] Show Material materials with Coeficiente de Poisson of 0.34 [-]
Elongación	23.0 °C	2.1 % Show Material materials with Elongación of 2.1 %	ISO 527-1/-2
Hardness, Ball Indentation	23.0 °C	221 MPa Show Material materials with Hardness, Ball Indentation of 221 MPa	ISO 2039-1
Hardness, Rockwell R	23.0 °C	120 [-] Show Material materials with Hardness, Rockwell R of 120 [-]	ISO 2039-2
Módulo de flexión	23.0 °C	8.94 GPa Show Material materials with Módulo de flexión of 8.94 GPa	ISO 178
Módulo elástico	23.0 °C	10.2 GPa Show Material materials with Módulo elástico of 10.2 GPa	ISO 527-1/-2
Resistencia a la compresión	23.0 °C	230 MPa Show Material materials with Resistencia a la compresión of 230 MPa	ISO 604
Resistencia a la flexión	23.0 °C	210 MPa Show Material materials with Resistencia a la flexión of 210 MPa	ISO 178
Resistencia a la tracción	23.0 °C	150 MPa Show Material materials with Resistencia a la tracción of 150 MPa	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-40.0 °C	8 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 8 kJ/m²	ISO 179/1eA
	-6.0 °C	8.5 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 8.5 kJ/m²	ISO 179/1eA
	23.0 °C	9.5 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 9.5 kJ/m²	ISO 179/1eA

Resistencia al choque, ensayo Charpy no entallado	-40.0 °C	45 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 45 kJ/m²	ISO 179/1eU
	23.0 °C	52 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 52 kJ/m²	ISO 179/1eU
	Unlock all property charts
Resistencia al choque, ensayo Izod entallado	-40.0 °C	35 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod entallado of 35 kJ/m²	ISO 180/1U
	23.0 °C	45 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod entallado of 45 kJ/m²	ISO 180/1U
	Unlock all property charts
Resistencia al choque, ensayo Izod no entallado	-40.0 °C	8.5 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod no entallado of 8.5 kJ/m²	ISO 180/1A
	23.0 °C	9.5 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod no entallado of 9.5 kJ/m²	ISO 180/1A
	Unlock all property charts

Aplicaciones térmicas

Property	Temperature	Value	Comment
Conductividad térmica	23.0 °C	0.29 W/(m·K) Show Material materials with Conductividad térmica of 0.29 W/(m·K)	of solid
Heat deflection temperature, 0.45 MPa		244 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 244 °C	ISO 75-1/-2
Heat deflection temperature, 1.80 MPa		221 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 221 °C	ISO 75-1/-2
Relative temperature index, electrical		140 °C Show Material materials with Relative temperature index, electrical of 140 °C	UL 746B \| 240mil
Relative temperature index, mechanical impact		140 °C Show Material materials with Relative temperature index, mechanical impact of 140 °C	UL 746B \| 240mil
Relative temperature index, mechanical strength		140 °C Show Material materials with Relative temperature index, mechanical strength of 140 °C	UL 746B \| 240mil
Temperatura de fusión		250 °C Show Material materials with Temperatura de fusión of 250 °C	ISO 11357-1/-3 \| 18°F/min
Inflamabilidad	Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: HB class, Thickness tested: 0.81 mm, UL recognition: yes -, Thickness tested: 0.75 mm, UL recognition: yes -, Glow Wire Flammability Index, 80mil: 800 °C, Glow Wire Flammability Index, 120mil: 900 °C, Glow Wire Ignition Temperature, 80mil: 825 °C, Glow Wire Ignition Temperature, 120mil: 825 °C, Glow Wire Temperature, No Flame, 40mil: 750 °C, Glow Wire Temperature, No Flame, 60mil: 750 °C, Glow Wire Temperature, No Flame, 80mil: 750 °C, Glow Wire Temperature, No Flame, 120mil: 825 °C, FMVSS Class: B -, Burning rate, Thickness 1 mm: 38 mm/min

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica, 1 MHz	23.0 °C	4.2 [-] Show Material materials with Constante dieléctrica, 1 MHz of 4.2 [-]	IEC 62631-2-1
Constante dieléctrica, 100 Hz	23.0 °C	4.5 [-] Show Material materials with Constante dieléctrica, 100 Hz of 4.5 [-]	IEC 62631-2-1
Dissipation factor, 100Hz	23.0 °C	0.03 [-] Show Material materials with Dissipation factor, 100Hz of 0.03 [-]	IEC 62631-2-1
Dissipation factor, 1MHz	23.0 °C	0.02 [-] Show Material materials with Dissipation factor, 1MHz of 0.02 [-]	IEC 62631-2-1
Rigidez dieléctrica	23.0 °C	22 kV/mm Show Material materials with Rigidez dieléctrica of 22 kV/mm	IEC 60243-1 \| Short Time, 23°C, 2mm
Surface resistivity	23.0 °C	1.00E+15 Ω/sq Show Material materials with Surface resistivity of 1.00E+15 Ω/sq	min. \| IEC 62631-3-2
Índice de seguimiento comparativo	23.0 °C	250 V Show Material materials with Índice de seguimiento comparativo of 250 V	IEC 60112

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.3 % Show Material materials with Contracción of 0.3 %	ISO 294-4, 2577
Contracción transversal	23.0 °C	0.9 % Show Material materials with Contracción transversal of 0.9 %	ISO 294-4, 2577

Technological properties

Property
Fillers	30% Glass Fiber
Processing methods	Drying Recommended: yes, Drying Temperature: 120°C, Drying Time, Dehumidified Dryer: 4-6h, Processing Moisture Content: ≤0.02%, Melt Temperature Optimum: 285°C, Min. melt temperature: 280°C, Max. melt temperature: 300°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 120°C, Min. mold temperature: 110°C, Max. mold temperature: 130°C, Hold pressure range: ≥80MPa, Hold pressure time: 4s/mm, Back pressure: As low as possible, Ejection temperature: 170°C

Rynite® 530 BK503

Description

Ashby charts

Lectura sugerida

Propiedades