Zytel® 70G30L NC010

Nombres alternativos y comerciales
PA66-GF30

Want to keep this datasheet? Save it now in your required format

Description

Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured. The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.Zytel® 70G30L NC010 is a 30% glass fiber reinforced polyamide 66 resin for injection molding.

Equivalent Materials

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	6.9 % Show Material materials with Absorción de agua of 6.9 %	Sim. to ISO 62 \| 80mil
Densidad	23.0 °C	1.37 g/cm³ Show Material materials with Densidad of 1.37 g/cm³	ISO 1183

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.34 [-] Show Material materials with Coeficiente de Poisson of 0.34 [-]
Elongación	23.0 °C	3.5 % Show Material materials with Elongación of 3.5 %	ISO 527-1/-2
Módulo elástico	23.0 °C	10 GPa Show Material materials with Módulo elástico of 10 GPa	ISO 527-1/-2
Resistencia a la tracción	23.0 °C	190 MPa Show Material materials with Resistencia a la tracción of 190 MPa	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-6.0 °C	10 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 10 kJ/m²	ISO 179/1eA
	23.0 °C	12 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 12 kJ/m²	ISO 179/1eA

Resistencia al choque, ensayo Charpy no entallado	-6.0 °C	60 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 60 kJ/m²	ISO 179/1eU
	23.0 °C	70 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 70 kJ/m²	ISO 179/1eU
	Unlock all property charts
Resistencia al choque, ensayo Izod no entallado	23.0 °C	12 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod no entallado of 12 kJ/m²	ISO 180/1A

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	2290 J/(kg·K) Show Material materials with Calor específico of 2290 J/(kg·K)	of melt
Coeficiente de dilatación térmica	23.0 °C	2.8E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 2.8E-5 1/K	ISO 11359-1/-2
Coeficiente de dilatación térmica transversal	23.0 °C	9.5E-5 1/K Show Material materials with Coeficiente de dilatación térmica transversal of 9.5E-5 1/K	ISO 11359-1/-2
Difusividad térmica	23.0 °C	0 mm²/s Show Material materials with Difusividad térmica of 0 mm²/s
Heat deflection temperature, 0.45 MPa		260 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 260 °C	ISO 75-1/-2
Heat deflection temperature, 1.80 MPa		253 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 253 °C	ISO 75-1/-2
Relative temperature index, electrical		130 °C Show Material materials with Relative temperature index, electrical of 130 °C	UL 746B \| 120mil
Relative temperature index, mechanical impact		120 °C Show Material materials with Relative temperature index, mechanical impact of 120 °C	UL 746B \| 120mil
Relative temperature index, mechanical strength		130 °C Show Material materials with Relative temperature index, mechanical strength of 130 °C	UL 746B \| 120mil
Temperatura de fusión		262 °C Show Material materials with Temperatura de fusión of 262 °C	ISO 11357-1/-3 \| 18°F/min
Temperatura de transición del vidrio		75 °C Show Material materials with Temperatura de transición del vidrio of 75 °C	ISO 11357-1/-2 \| 18°F/min
Inflamabilidad	Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: HB class, Thickness tested: 0.71 mm, UL recognition: yes -, Oxygen index: 24 %, FMVSS Class: SE -, Burning rate, Thickness 1 mm: 24 mm/min

Eléctrico

Property	Temperature	Value	Comment
Dissipation factor, 100Hz	23.0 °C	0.02 [-] Show Material materials with Dissipation factor, 100Hz of 0.02 [-]	IEC 62631-2-1
Dissipation factor, 1MHz	23.0 °C	0.02 [-] Show Material materials with Dissipation factor, 1MHz of 0.02 [-]	IEC 62631-2-1
Volume resistivity	23.0 °C	1.00E+13 Ω·cm Show Material materials with Volume resistivity of 1.00E+13 Ω·cm	IEC 62631-3-1
Índice de seguimiento comparativo	23.0 °C	600 V Show Material materials with Índice de seguimiento comparativo of 600 V	IEC 60112

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.3 % Show Material materials with Contracción of 0.3 %	ISO 294-4, 2577
Contracción transversal	23.0 °C	1.1 % Show Material materials with Contracción transversal of 1.1 %	ISO 294-4, 2577

Technological properties

Property
Fillers	30% Glass Fiber
Processing methods	Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 295°C, Min. melt temperature: 285°C, Max. melt temperature: 305°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 100°C, Min. mold temperature: 70°C, Max. mold temperature: 120°C, Hold pressure range: 50-100MPa, Hold pressure time: 3s/mm

Zytel® 70G30L NC010

Description

Equivalent Materials

Ashby charts

Lectura sugerida

Propiedades