Rynite® FR530 NC010

Nombres alternativos y comerciales
PET-GF30FR(17)

Want to keep this datasheet? Save it now in your required format

Description

Common features of Rynite® thermoplastic polyester include mechanical and physical properties such as excellent balance of strength and stiffness, dimensional stability, creep resistance, heat resistance,high surface gloss and good inherent electrical properties at elevated temperature. It can be processed over a broad temperature range and has excellent flow properties. Rynite® thermoplastic polyester resins aretypically used in demanding applications in the automotive, electrical and electronics, appliances where they successfully replace metals and thermosets, as well as other thermoplastic polymers. Rynite® FR530 NC010is a 30% glass reinforced, flame retardant, modified polyethylene terephthalate resin.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.75 % Show Material materials with Absorción de agua of 0.75 %	Sim. to ISO 62 \| 80mil
Densidad	23.0 °C	1.68 g/cm³ Show Material materials with Densidad of 1.68 g/cm³	ISO 1183

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]
Elongación	23.0 °C	2 % Show Material materials with Elongación of 2 %	ISO 527-1/-2
Módulo de flexión	23.0 °C	10.5 GPa Show Material materials with Módulo de flexión of 10.5 GPa	ISO 178
Módulo elástico	23.0 °C	11.5 GPa Show Material materials with Módulo elástico of 11.5 GPa	ISO 527-1/-2
Resistencia a la compresión	23.0 °C	200 MPa Show Material materials with Resistencia a la compresión of 200 MPa	ISO 604
Resistencia a la tracción	23.0 °C	135 MPa Show Material materials with Resistencia a la tracción of 135 MPa	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-6.0 °C	9 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 9 kJ/m²	ISO 179/1eA
	23.0 °C	10 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 10 kJ/m²	ISO 179/1eA

Resistencia al choque, ensayo Charpy no entallado	-6.0 °C	40 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 40 kJ/m²	ISO 179/1eU
	23.0 °C	40 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 40 kJ/m²	ISO 179/1eU
	Unlock all property charts
Resistencia al cizallamiento	23.0 °C	60 MPa Show Material materials with Resistencia al cizallamiento of 60 MPa	ASTM D 732

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	1720 J/(kg·K) Show Material materials with Calor específico of 1720 J/(kg·K)	of melt
Coeficiente de dilatación térmica	23.0 °C	2.2E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 2.2E-5 1/K	ISO 11359-1/-2 \| -40 - 23°C
Coeficiente de dilatación térmica transversal	23.0 °C	6.8E-5 1/K Show Material materials with Coeficiente de dilatación térmica transversal of 6.8E-5 1/K	ISO 11359-1/-2 \| -40 - 23°C
Difusividad térmica	23.0 °C	0 mm²/s Show Material materials with Difusividad térmica of 0 mm²/s
Heat deflection temperature, 0.45 MPa		243 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 243 °C	ISO 75-1/-2
Heat deflection temperature, 1.80 MPa		225 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 225 °C	ISO 75-1/-2
Relative temperature index, electrical		155 °C Show Material materials with Relative temperature index, electrical of 155 °C	UL 746B \| 120mil
Relative temperature index, mechanical impact		155 °C Show Material materials with Relative temperature index, mechanical impact of 155 °C	UL 746B \| 120mil
Relative temperature index, mechanical strength		155 °C Show Material materials with Relative temperature index, mechanical strength of 155 °C	UL 746B \| 120mil
Temperatura de fusión		252 °C Show Material materials with Temperatura de fusión of 252 °C	ISO 11357-1/-3 \| 18°F/min
Temperatura de reblandecimiento Vicat		220 °C Show Material materials with Temperatura de reblandecimiento Vicat of 220 °C	ISO 306 \| 90°F/h, 11 lbf
Inflamabilidad	Burning Behav. at 60mil nom. thickn.: V-0 class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: V-0 class, Thickness tested: 0.35 mm, UL recognition: yes -, Burning Behav. 5V at thickness h: 5VA class, Thickness tested: 1.5 mm, UL recognition: yes -, Oxygen index: 33 %, Glow Wire Flammability Index, 30mil: 960 °C, Glow Wire Flammability Index, 40mil: 960 °C, Glow Wire Flammability Index, 80mil: 960 °C, Glow Wire Flammability Index, 120mil: 960 °C, Glow Wire Ignition Temperature, 30mil: 800 °C, Glow Wire Ignition Temperature, 40mil: 800 °C, Glow Wire Ignition Temperature, 60mil: 800 °C, Glow Wire Ignition Temperature, 80mil: 850 °C, Glow Wire Ignition Temperature, 120mil: 925 °C, Glow Wire Temperature, No Flame, 40mil: 800 °C, Glow Wire Temperature, No Flame, 80mil: 775 °C, FMVSS Class: DNI -, Railway classification: R23 -, Railway classification rating: HL1 -

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica, 1 MHz	23.0 °C	4.3 [-] Show Material materials with Constante dieléctrica, 1 MHz of 4.3 [-]	IEC 62631-2-1
Constante dieléctrica, 100 Hz	23.0 °C	4.8 [-] Show Material materials with Constante dieléctrica, 100 Hz of 4.8 [-]	IEC 62631-2-1
Dissipation factor, 100Hz	23.0 °C	7E-3 [-] Show Material materials with Dissipation factor, 100Hz of 7E-3 [-]	IEC 62631-2-1
Dissipation factor, 1MHz	23.0 °C	0.01 [-] Show Material materials with Dissipation factor, 1MHz of 0.01 [-]	IEC 62631-2-1
Rigidez dieléctrica	23.0 °C	39 kV/mm Show Material materials with Rigidez dieléctrica of 39 kV/mm	IEC 60243-1
Surface resistivity	23.0 °C	1.00E+14 Ω/sq Show Material materials with Surface resistivity of 1.00E+14 Ω/sq	IEC 62631-3-2
Volume resistivity	23.0 °C	1.00E+15 Ω·cm Show Material materials with Volume resistivity of 1.00E+15 Ω·cm	min. \| IEC 62631-3-1
Índice de seguimiento comparativo	23.0 °C	2 V Show Material materials with Índice de seguimiento comparativo of 2 V	UL 746A

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.2 % Show Material materials with Contracción of 0.2 %	ISO 294-4, 2577
Contracción transversal	23.0 °C	0.8 % Show Material materials with Contracción transversal of 0.8 %	ISO 294-4, 2577

Technological properties

Property
Fillers	30% Glass Fiber
Processing methods	Drying Recommended: yes, Drying Temperature: 120°C, Drying Time, Dehumidified Dryer: 4-6h, Processing Moisture Content: ≤0.02%, Melt Temperature Optimum: 280°C, Min. melt temperature: 270°C, Max. melt temperature: 290°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 110°C, Min. mold temperature: 100°C, Max. mold temperature: 120°C, Hold pressure range: ≥80MPa, Hold pressure time: 4s/mm, Back pressure: As low as possible, Ejection temperature: 170°C

Rynite® FR530 NC010

Description

Ashby charts

Lectura sugerida

Propiedades