Zytel® 70G25HSL NC010

Nombres alternativos y comerciales
PA66-GF25

Want to keep this datasheet? Save it now in your required format

Description

Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured. The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.Zytel® 70G25HSL is a 25% glass fibre reinforced, heat stabilised polyamide 66 resin for injection molding.

Equivalent Materials

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	1.4 % Show Material materials with Absorción de agua of 1.4 %	Sim. to ISO 62 \| Immersion 24h
Densidad	23.0 °C	1.33 g/cm³ Show Material materials with Densidad of 1.33 g/cm³	ISO 1183

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.34 [-] Show Material materials with Coeficiente de Poisson of 0.34 [-]
Dureza Rockwell M	23.0 °C	103 [-] Show Material materials with Dureza Rockwell M of 103 [-]	ISO 2039-2
Elongación	23.0 °C	3 % Show Material materials with Elongación of 3 %	ISO 527-1/-2
Hardness, Ball Indentation	23.0 °C	260 MPa Show Material materials with Hardness, Ball Indentation of 260 MPa	ISO 2039-1
Hardness, Rockwell R	23.0 °C	123 [-] Show Material materials with Hardness, Rockwell R of 123 [-]	ISO 2039-2
Módulo de flexión	23.0 °C	8 GPa Show Material materials with Módulo de flexión of 8 GPa	ISO 178
Módulo elástico	23.0 °C	8.5 GPa Show Material materials with Módulo elástico of 8.5 GPa	ISO 527-1/-2
Resistencia a la flexión	23.0 °C	260 MPa Show Material materials with Resistencia a la flexión of 260 MPa	ISO 178
Resistencia a la tracción	23.0 °C	180 MPa Show Material materials with Resistencia a la tracción of 180 MPa	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-6.0 °C	10 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 10 kJ/m²	ISO 179/1eA
	23.0 °C	10 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 10 kJ/m²	ISO 179/1eA

Resistencia al choque, ensayo Charpy no entallado	-6.0 °C	50 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 50 kJ/m²	ISO 179/1eU
	23.0 °C	60 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 60 kJ/m²	ISO 179/1eU
	Unlock all property charts
Resistencia al choque, ensayo Izod entallado	-30.0 °C	50 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod entallado of 50 kJ/m²	ISO 180/1U
	23.0 °C	50 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod entallado of 50 kJ/m²	ISO 180/1U
	Unlock all property charts
Resistencia al choque, ensayo Izod no entallado	-30.0 °C	8 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod no entallado of 8 kJ/m²	ISO 180/1A
	23.0 °C	10 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod no entallado of 10 kJ/m²	ISO 180/1A
	Unlock all property charts

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	2090 J/(kg·K) Show Material materials with Calor específico of 2090 J/(kg·K)	of melt
Coeficiente de dilatación térmica	23.0 °C	1.8E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.8E-5 1/K	ISO 11359-1/-2 \| 23 - 55°C
Coeficiente de dilatación térmica transversal	23.0 °C	1.3E-4 1/K Show Material materials with Coeficiente de dilatación térmica transversal of 1.3E-4 1/K	ISO 11359-1/-2 \| 55 - 160°C
Heat deflection temperature, 0.45 MPa		263 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 263 °C	ISO 75-1/-2
Heat deflection temperature, 1.80 MPa		245 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 245 °C	ISO 75-1/-2
Relative temperature index, electrical		140 °C Show Material materials with Relative temperature index, electrical of 140 °C	UL 746B \| 120mil
Relative temperature index, mechanical impact		125 °C Show Material materials with Relative temperature index, mechanical impact of 125 °C	UL 746B \| 120mil
Relative temperature index, mechanical strength		140 °C Show Material materials with Relative temperature index, mechanical strength of 140 °C	UL 746B \| 120mil
Temperatura de fusión		263 °C Show Material materials with Temperatura de fusión of 263 °C	ISO 11357-1/-3 \| 18°F/min
Temperatura de reblandecimiento Vicat		255 °C Show Material materials with Temperatura de reblandecimiento Vicat of 255 °C	ISO 306 \| 90°F/h, 11 lbf
Temperatura de transición del vidrio		80 °C Show Material materials with Temperatura de transición del vidrio of 80 °C	ISO 11357-1/-2 \| 18°F/min
Inflamabilidad	Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: HB class, Thickness tested: 0.71 mm, UL recognition: yes -, Glow Wire Flammability Index, 40mil: 650 °C, Glow Wire Flammability Index, 80mil: 650 °C, Glow Wire Flammability Index, 120mil: 750 °C, FMVSS Class: SE -, Burning rate, Thickness 1 mm: 18 mm/min

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica, 1 MHz	23.0 °C	4.1 [-] Show Material materials with Constante dieléctrica, 1 MHz of 4.1 [-]	IEC 62631-2-1
Dissipation factor, 1MHz	23.0 °C	0.02 [-] Show Material materials with Dissipation factor, 1MHz of 0.02 [-]	IEC 62631-2-1
Volume resistivity	23.0 °C	1.00E+15 Ω·cm Show Material materials with Volume resistivity of 1.00E+15 Ω·cm	min. \| IEC 62631-3-1
Índice de seguimiento comparativo	23.0 °C	400 V Show Material materials with Índice de seguimiento comparativo of 400 V	IEC 60112

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.3 % Show Material materials with Contracción of 0.3 %	ISO 294-4, 2577
Contracción transversal	23.0 °C	1.1 % Show Material materials with Contracción transversal of 1.1 %	ISO 294-4, 2577

Technological properties

Property
Fillers	25% Glass Fiber
Processing methods	Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 295°C, Min. melt temperature: 285°C, Max. melt temperature: 305°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 100°C, Min. mold temperature: 70°C, Max. mold temperature: 120°C, Hold pressure range: 50-100MPa, Hold pressure time: 3s/mm, Ejection temperature: 210°C

Zytel® 70G25HSL NC010

Description

Equivalent Materials

Ashby charts

Lectura sugerida

Propiedades