Zytel® 70G50HSLA BK039B

Nombres alternativos y comerciales
PA66-GF50

Want to keep this datasheet? Save it now in your required format

Description

Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured. The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.Zytel® 70G50HSLA BK039B is a 50% glass fiber reinforced, heat stabilized polyamide 66 resin for injection molding. It has excellent flow characteristics.

Equivalent Materials

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.8 % Show Material materials with Absorción de agua of 0.8 %	Sim. to ISO 62 \| Immersion 24h
Densidad	23.0 °C	1.57 g/cm³ Show Material materials with Densidad of 1.57 g/cm³	ISO 1183

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]
Elongación	23.0 °C	2.4 % Show Material materials with Elongación of 2.4 %	ISO 527-1/-2
Hardness, Ball Indentation	23.0 °C	300 MPa Show Material materials with Hardness, Ball Indentation of 300 MPa	ISO 2039-1
Módulo de flexión	23.0 °C	16 GPa Show Material materials with Módulo de flexión of 16 GPa	ISO 178
Módulo elástico	23.0 °C	17 GPa Show Material materials with Módulo elástico of 17 GPa	ISO 527-1/-2
Resistencia a la compresión	23.0 °C	215 MPa Show Material materials with Resistencia a la compresión of 215 MPa	ISO 604
Resistencia a la flexión	23.0 °C	400 MPa Show Material materials with Resistencia a la flexión of 400 MPa	ISO 178
Resistencia a la tracción	23.0 °C	240 MPa Show Material materials with Resistencia a la tracción of 240 MPa	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-6.0 °C	15 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 15 kJ/m²	ISO 179/1eA
	23.0 °C	15 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 15 kJ/m²	ISO 179/1eA

Resistencia al choque, ensayo Charpy no entallado	-6.0 °C	90 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 90 kJ/m²	ISO 179/1eU
	23.0 °C	90 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 90 kJ/m²	ISO 179/1eU
	Unlock all property charts
Resistencia al cizallamiento	23.0 °C	90 MPa Show Material materials with Resistencia al cizallamiento of 90 MPa	ASTM D 732

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	1870 J/(kg·K) Show Material materials with Calor específico of 1870 J/(kg·K)	of melt
Coeficiente de dilatación térmica	23.0 °C	1.9E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.9E-5 1/K	ASTM E 831 \| 55 - 160°C
Coeficiente de dilatación térmica transversal	23.0 °C	6.1E-5 1/K Show Material materials with Coeficiente de dilatación térmica transversal of 6.1E-5 1/K	ASTM E 831 \| 23 - 55°C
Conductividad térmica	23.0 °C	0.46 W/(m·K) Show Material materials with Conductividad térmica of 0.46 W/(m·K)	of solid
Heat deflection temperature, 0.45 MPa		261 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 261 °C	ISO 75-1/-2
Heat deflection temperature, 1.80 MPa		255 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 255 °C	ISO 75-1/-2
Relative temperature index, electrical		120 °C Show Material materials with Relative temperature index, electrical of 120 °C	UL 746B \| 120mil
Relative temperature index, mechanical impact		130 °C Show Material materials with Relative temperature index, mechanical impact of 130 °C	UL 746B \| 120mil
Relative temperature index, mechanical strength		130 °C Show Material materials with Relative temperature index, mechanical strength of 130 °C	UL 746B \| 120mil
Temperatura de fusión		262 °C Show Material materials with Temperatura de fusión of 262 °C	ISO 11357-1/-3 \| 18°F/min
Temperatura de reblandecimiento Vicat		255 °C Show Material materials with Temperatura de reblandecimiento Vicat of 255 °C	ISO 306 \| 90°F/h, 11 lbf
Temperatura de transición del vidrio		65 °C Show Material materials with Temperatura de transición del vidrio of 65 °C	ISO 11357-1/-2 \| 18°F/min
Inflamabilidad	Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: HB class, Thickness tested: 0.83 mm, UL recognition: yes -, Oxygen index: 24 %, FMVSS Class: SE -

Eléctrico

Property	Temperature	Value	Comment
Volume resistivity	23.0 °C	1.00E+15 Ω·cm Show Material materials with Volume resistivity of 1.00E+15 Ω·cm	IEC 62631-3-1
Índice de seguimiento comparativo	23.0 °C	500 V Show Material materials with Índice de seguimiento comparativo of 500 V	IEC 60112

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.3 % Show Material materials with Contracción of 0.3 %	ISO 294-4, 2577
Contracción transversal	23.0 °C	0.8 % Show Material materials with Contracción transversal of 0.8 %	ISO 294-4, 2577

Technological properties

Property
Fillers	50% Glass Fiber
Processing methods	Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 295°C, Min. melt temperature: 285°C, Max. melt temperature: 305°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 100°C, Min. mold temperature: 70°C, Max. mold temperature: 120°C, Hold pressure range: 50-100MPa, Hold pressure time: 3s/mm, Ejection temperature: 210°C

Zytel® 70G50HSLA BK039B

Description

Equivalent Materials

Ashby charts

Lectura sugerida

Propiedades