Zytel® BM73G15THS BK317

Nombres alternativos y comerciales
PA6-I-GF15

Want to keep this datasheet? Save it now in your required format

Description

Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured. The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.Zytel® BM73G15THS is a 15% glass fibre reinforced, heat stabilised, lubricated, toughened polyamide 6 for blow molding.

Equivalent Materials

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	7.5 % Show Material materials with Absorción de agua of 7.5 %	Sim. to ISO 62 \| 80mil
Densidad	23.0 °C	1.2 g/cm³ Show Material materials with Densidad of 1.2 g/cm³	ISO 1183

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.35 [-] Show Material materials with Coeficiente de Poisson of 0.35 [-]
Elongación	23.0 °C	5 % Show Material materials with Elongación of 5 %	ISO 527-1/-2
Hardness, Ball Indentation	23.0 °C	180 MPa Show Material materials with Hardness, Ball Indentation of 180 MPa	ISO 2039-1
Módulo elástico	23.0 °C	5 GPa Show Material materials with Módulo elástico of 5 GPa	ISO 527-1/-2
Resistencia a la tracción	23.0 °C	100 MPa Show Material materials with Resistencia a la tracción of 100 MPa	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-40.0 °C	12 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 12 kJ/m²	ISO 179/1eA
	-6.0 °C	13 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 13 kJ/m²	ISO 179/1eA
	23.0 °C	21 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 21 kJ/m²	ISO 179/1eA

Resistencia al choque, ensayo Charpy no entallado	23.0 °C	80 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 80 kJ/m²	ISO 179/1eU
Resistencia al choque, ensayo Izod no entallado	-30.0 °C	11 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod no entallado of 11 kJ/m²	ISO 180/1A
	23.0 °C	21 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod no entallado of 21 kJ/m²	ISO 180/1A
	Unlock all property charts

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 0.45 MPa	215 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 215 °C	ISO 75-1/-2
Heat deflection temperature, 1.80 MPa	190 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 190 °C	ISO 75-1/-2
Temperatura de fusión	221 °C Show Material materials with Temperatura de fusión of 221 °C	ISO 11357-1/-3 \| 18°F/min
Temperatura de transición del vidrio	60 °C Show Material materials with Temperatura de transición del vidrio of 60 °C	ISO 11357-1/-2 \| 18°F/min
Inflamabilidad	Oxygen index: 25 %, FMVSS Class: B -, Burning rate, Thickness 1 mm: <80 mm/min

Eléctrico

Property	Temperature	Value	Comment
Dissipation factor, 100Hz	23.0 °C	0.02 [-] Show Material materials with Dissipation factor, 100Hz of 0.02 [-]	IEC 62631-2-1
Dissipation factor, 1MHz	23.0 °C	0.02 [-] Show Material materials with Dissipation factor, 1MHz of 0.02 [-]	IEC 62631-2-1
Volume resistivity	23.0 °C	1.00E+15 Ω·cm Show Material materials with Volume resistivity of 1.00E+15 Ω·cm	IEC 62631-3-1
Índice de seguimiento comparativo	23.0 °C	600 V Show Material materials with Índice de seguimiento comparativo of 600 V	IEC 60112

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.7 % Show Material materials with Contracción of 0.7 %	ISO 294-4, 2577
Contracción transversal	23.0 °C	1.2 % Show Material materials with Contracción transversal of 1.2 %	ISO 294-4, 2577
Melt viscosity	280.0 °C	300 Pa·s Show Material materials with Melt viscosity of 300 Pa·s	ISO 11443 \| @ 1000 sec-1, 280°C

Technological properties

Property
Fillers	15% Glass Fiber
Processing methods	Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 270°C, Min. melt temperature: 260°C, Max. melt temperature: 280°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 100°C, Min. mold temperature: 70°C, Max. mold temperature: 120°C, Hold pressure range: 50-100MPa, Hold pressure time: 3s/mm

Zytel® BM73G15THS BK317

Description

Equivalent Materials

Ashby charts

Lectura sugerida

Propiedades