General
Mecánica
| Property | Value |
|---|---|
Dureza Shore D | 64.0 [-] Show Material materials with Dureza Shore D of 64.0 [-] |
Elongación | 89.0 % Show Material materials with Elongación of 89.0 % |
Impact strength, Izod unnotched, ASTM | 38.0 J/m Show Material materials with Impact strength, Izod unnotched, ASTM of 38.0 J/m |
Módulo de flexión | 4.43 GPa Show Material materials with Módulo de flexión of 4.43 GPa |
Resistencia a la flexión | 14.0 MPa Show Material materials with Resistencia a la flexión of 14.0 MPa |
Resistencia a la tracción | 9 MPa Show Material materials with Resistencia a la tracción of 9 MPa |
Aplicaciones térmicas
| Property | Value |
|---|---|
Calor de descomposición | 185.0 J/g Show Material materials with Calor de descomposición of 185.0 J/g |
Temperatura de fusión | 132 °C Show Material materials with Temperatura de fusión of 132 °C |
Temperatura máx. de funcionamiento | 185.0 °C Show Material materials with Temperatura máx. de funcionamiento of 185.0 °C |
Rheological Properties
| Property | Value | Comment |
|---|---|---|
Velocidad de flujo de la masa derretida | 9 g/10min Show Material materials with Velocidad de flujo de la masa derretida of 9 g/10min | 175°C/5 kg |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Toy, tube, profile extrusion | |
| Certifications | Food Contact: Halal | |
| Processing methods | 1. Clean extruder with general purpose polyethylene or polypropylene. 2. Vacuum out hopper system to avoid contamination and make sure that the humidity of the air is below 40°C at dew point. 3. Introduce ICBP Bio Resin in to the extruder at the operating conditions used in the first step. 4. Once ICBP Bio Resin has been purged, reduce barrel temperatures to desired set points. 5. At shutdown, purge machine with PE or PP. | |