Medium Density Polyethylene (MDPE)

Nombres alternativos y comerciales
Lupolen®, Eltex®, Flexirene®, Clearflex®, Eraclene®, Borstar®, Alfaten
Want to keep this datasheet? Save it now in your required format

Description

Medium-density polyethylene with low temperature impact resistance and high stress crack resistance (experiments show resistance against biodiesel fuel for some grades). These products are also produced as film extrusion grades.

Los datos sobre este material han sido proporcionados por M-Base.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyValue

Densidad

0.925 - 0.94 g/cm³

Show Material materials with Densidad of 0.925 - 0.94 g/cm³

Mecánica

PropertyValueComment

Elongación

100.0 - 1000.0 %

Show Material materials with Elongación of 100.0 - 1000.0 %

Módulo elástico

0.4 - 0.9 GPa

Show Material materials with Módulo elástico of 0.4 - 0.9 GPa

Resistencia a la tracción

10.0 - 20.0 MPa

Show Material materials with Resistencia a la tracción of 10.0 - 20.0 MPa

at 10-15% strain

Resistencia al choque, ensayo Charpy no entallado

no break

Aplicaciones térmicas

PropertyValue

Calor específico

2300 J/(kg·K)

Show Material materials with Calor específico of 2300 J/(kg·K)

Coeficiente de dilatación térmica

0.00018 - 0.00023 1/K

Show Material materials with Coeficiente de dilatación térmica of 0.00018 - 0.00023 1/K

Conductividad térmica

0.48 W/(m·K)

Show Material materials with Conductividad térmica of 0.48 W/(m·K)

Temperatura de fusión

120.0 - 125.0 °C

Show Material materials with Temperatura de fusión of 120.0 - 125.0 °C

Inflamabilidad

UL 94 HB

Eléctrico

PropertyValue

Constante dieléctrica

2.3 [-]

Show Material materials with Constante dieléctrica of 2.3 [-]

Resistividad eléctrica

1000000000000000.0 Ω·m

Show Material materials with Resistividad eléctrica of 1000000000000000.0 Ω·m

Óptico

PropertyValue

Transparencia

no

Technological properties

Property
Application areas

Gas pipes, toys, carts, packaging, over-wrap films, milk pouches

Other

You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application:

Polymer Advanced Search

Processing methods

Injection molding, blow molding, extrusion, rotational molding