MONO-ECO monocrystalline synthetic micron diamond powder, standard size range

Want to keep this datasheet? Save it now in your required format

Description

MONO-ECO diamond is a low-cost, monocrystalline metal-bond type diamond. The product is used in cost-sensitive applications, where the diamond cost has a major impact on the overall process cost. MONO-ECO micron diamond is available as diamond powder or as ready-to-use diamond suspension


Particle strength: Monocrystalline diamond particles fracture along the parallel cleavage planes running through the particle. For diamond tools, the particle fracture provides a self- sharpening mechanism and thus increases tool life.


Cost-effectiveness: Thanks to its low cost, MONO-ECO diamond is a good choice for price-sensitive applications. MONO-ECO diamond is often used to replace conventional abrasives.

Los datos sobre este material han sido proporcionados por Pureon.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyValueComment

Densidad

3.51 g/cm³

Show Supplier Material materials with Densidad of 3.51 g/cm³

Rango de tamaño de partículas

60 µm

Show Supplier Material materials with Rango de tamaño de partículas of 60 µm

Please refer to the technological properties section below for more detailed (narrow) particle size ranges available.

Mecánica

PropertyValue

Dureza (en mohs)

10 [-]

Show Supplier Material materials with Dureza (en mohs) of 10 [-]

Aplicaciones térmicas

PropertyValue

Coeficiente de dilatación térmica

1.1e-06 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica of 1.1e-06 1/K

Conductividad térmica

600 - 4000 W/(m·K)

Show Supplier Material materials with Conductividad térmica of 600 - 4000 W/(m·K)

Eléctrico

PropertyValue

Banda prohibida

6 eV

Show Supplier Material materials with Banda prohibida of 6 eV

Resistividad eléctrica

1e+12 - 1e+19 Ω·m

Show Supplier Material materials with Resistividad eléctrica of 1e+12 - 1e+19 Ω·m

Óptico

PropertyValue

Índice de refracción

2 [-]

Show Supplier Material materials with Índice de refracción of 2 [-]

Chemical properties

PropertyValueComment

Carbono

99 %

Show Supplier Material materials with Carbono of 99 %

min. purity

Technological properties

Property
Application areas

MONO-ECO diamond is typically used for lapping of ceramics, metals and diamond wire dies. Examples of bonded applications include the use of MONO-ECO for wear-resistant surface coatings, for thermal conduction and for grinding tools.

Color

Yellowish Gray

Crystal structure

Monocrystalline

Gradings

Standard size range: The standard size range makes this product suitable for applications that focus primarily on cost. The controlled upper size limit ensures a uniform surface quality.

Particle size range table

Micron Size
µm
Median (D50)
µm
Upper Limit (D99)
µm max.
MONO-ECO   (0-0.25)0.150.5
MONO-ECO   (0-0.5)0.250.8
MONO-ECO   (0-1)0.551.3
MONO-ECO   (0.5-1)0.711.5
MONO-ECO   (0-2)1.102.7
MONO-ECO   (0.5-3)1.403.3
MONO-ECO   (1-3)1.903.8
MONO-ECO   (2-4)3.205.5
MONO-ECO   (3-6)4.207.5
MONO-ECO   (4-8)6.3010.5
MONO-ECO   (6-12)9.015.0
MONO-ECO   (8-15)11.419.1
MONO-ECO   (10-20)15.025.0
MONO-ECO   (15-30)22.536.0
MONO-ECO   (20-40)30.048.0
MONO-ECO   (40-60)47.070.5

Synthesis

MONO-ECO diamond is a monocrystalline metal-bond diamond produced by HPHT (high-pressure, high temperature) synthesis. The diamond particles feature an oriented crystal structure with parallel-running cleavage planes, similar to natural diamond. Depending on diamond size, MONO-ECO diamond varies in appearance from light gray to pale yellow.