EN 10088-1 Grade X3CrTi17 soft annealed (+A)

View suppliers (5)
Want to keep this datasheet? Save it now in your required format

Description

Acc. VdTÜV material data sheet 494 : 1996-06 the stainless ferritic steel X 6 CrTi 17, mat. no. 1.4510, is used for longitudinal welded tubes for pressure vessels acc. TRB 100 and AD data sheet W 2 at operating temperatures from - 10 to 280 °C. and pressures up to 50 bar and for type approved hot water boiler up to 100 °C. The weldability is examined allowing for the generally accepted engineering rules for inert arc welding without filler or with wire electrode and for seam welding. Preheating is mostly not necessary, the intermediate layer temperature amounts to max. 200 °C. An heat treatment after the welding is unusual. Longitudinal welded tubes have to recrystallising annealed. The material is also in the welded condition resistant against intercrystalline corrosion. For the material acc. DIN EN 10088-1 : 1995-08 applies: The mark X3CrTi17 is comparable to X 6 CrTi 17 (here higher C-content). This material is a ferritic steel with comparable general corrosion properties like 1.4016. It is widely resistant in water, steam, weak acids and bases as well as in oxidizing acids. The steel shows increased stress corrosion resistance in hot bases, low chloride containing water. No risk of intercrystalline corrosion after welding due to Ti-addition, but it is therefore unsuitable for mirror finishing. Application for welded parts in washing machines (lye tanks) and partly in chemical apparatus engineering (weak acids), in dairy, food, brewery, dyeing and soap industry.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValue

Densidad

20.0 °C

7.56 - 7.7 g/cm³

Show Material materials with Densidad of 7.56 - 7.7 g/cm³

Mecánica

PropertyTemperatureValueComment

Coeficiente de Poisson

23.0 °C

0.3 [-]

Show Material materials with Coeficiente de Poisson of 0.3 [-]

Typical for Ferritic Stainless Steel

Elongación

20.0 °C

23 %

Show Material materials with Elongación of 23 %

Elongación A80

20.0 °C

23 %

Show Material materials with Elongación A80 of 23 %

Elongación A80 transversal

20.0 °C

23 %

Show Material materials with Elongación A80 transversal of 23 %

Elongación transversal

20.0 °C

23 %

Show Material materials with Elongación transversal of 23 %

Límite elástico Rp 0,2

20.0 °C

230 MPa

Show Material materials with Límite elástico Rp 0,2 of 230 MPa

100.0 °C

195 MPa

Show Material materials with Límite elástico Rp 0,2 of 195 MPa

150.0 °C

190 MPa

Show Material materials with Límite elástico Rp 0,2 of 190 MPa

200.0 °C

185 MPa

Show Material materials with Límite elástico Rp 0,2 of 185 MPa

250.0 °C

175 MPa

Show Material materials with Límite elástico Rp 0,2 of 175 MPa

300.0 °C

165 MPa

Show Material materials with Límite elástico Rp 0,2 of 165 MPa

350.0 °C

155 MPa

Show Material materials with Límite elástico Rp 0,2 of 155 MPa

Límite elástico transversal Rp 0,2

20.0 °C

240 MPa

Show Material materials with Límite elástico transversal Rp 0,2 of 240 MPa

Módulo de cizallamiento

23.0 °C

77 GPa

Show Material materials with Módulo de cizallamiento of 77 GPa

Typical for Ferritic Stainless Steel

Módulo elástico

20.0 °C

218 - 220 GPa

Show Material materials with Módulo elástico of 218 - 220 GPa

100.0 °C

213 - 215 GPa

Show Material materials with Módulo elástico of 213 - 215 GPa

200.0 °C

206 - 210 GPa

Show Material materials with Módulo elástico of 206 - 210 GPa

300.0 °C

198 - 205 GPa

Show Material materials with Módulo elástico of 198 - 205 GPa

400.0 °C

190 - 195 GPa

Show Material materials with Módulo elástico of 190 - 195 GPa

500.0 °C

180 GPa

Show Material materials with Módulo elástico of 180 GPa

600.0 °C

167 GPa

Show Material materials with Módulo elástico of 167 GPa

700.0 °C

150 GPa

Show Material materials with Módulo elástico of 150 GPa

Unlock all property charts

Resistencia a la tracción

20.0 °C

420 - 600 MPa

Show Material materials with Resistencia a la tracción of 420 - 600 MPa

Resistencia a la tracción transversal

20.0 °C

420 - 600 MPa

Show Material materials with Resistencia a la tracción transversal of 420 - 600 MPa

Aplicaciones térmicas

PropertyTemperatureValueComment

Calor específico

20.0 °C

450 - 460 J/(kg·K)

Show Material materials with Calor específico of 450 - 460 J/(kg·K)

100.0 °C

482 J/(kg·K)

Show Material materials with Calor específico of 482 J/(kg·K)

200.0 °C

506 J/(kg·K)

Show Material materials with Calor específico of 506 J/(kg·K)

300.0 °C

525 J/(kg·K)

Show Material materials with Calor específico of 525 J/(kg·K)

400.0 °C

547 J/(kg·K)

Show Material materials with Calor específico of 547 J/(kg·K)

500.0 °C

576 J/(kg·K)

Show Material materials with Calor específico of 576 J/(kg·K)

600.0 °C

616 J/(kg·K)

Show Material materials with Calor específico of 616 J/(kg·K)

Unlock all property charts

Coeficiente de dilatación térmica

20.0 °C

9.9E-6 1/K

Show Material materials with Coeficiente de dilatación térmica of 9.9E-6 1/K

100.0 °C

1E-5 - 1.03E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1E-5 - 1.03E-5 1/K

200.0 °C

1E-5 - 1.08E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1E-5 - 1.08E-5 1/K

300.0 °C

1.05E-5 - 1.12E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.05E-5 - 1.12E-5 1/K

400.0 °C

1.05E-5 - 1.16E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.05E-5 - 1.16E-5 1/K

500.0 °C

1.1E-5 - 1.19E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.1E-5 - 1.19E-5 1/K

600.0 °C

1.21E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.21E-5 1/K

700.0 °C

1.24E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.24E-5 1/K

800.0 °C

1.29E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.29E-5 1/K

Unlock all property charts

Conductividad térmica

20.0 °C

16 - 25 W/(m·K)

Show Material materials with Conductividad térmica of 16 - 25 W/(m·K)

100.0 °C

17.2 W/(m·K)

Show Material materials with Conductividad térmica of 17.2 W/(m·K)

200.0 °C

18.6 W/(m·K)

Show Material materials with Conductividad térmica of 18.6 W/(m·K)

300.0 °C

20 W/(m·K)

Show Material materials with Conductividad térmica of 20 W/(m·K)

400.0 °C

21.2 W/(m·K)

Show Material materials with Conductividad térmica of 21.2 W/(m·K)

500.0 °C

22.3 W/(m·K)

Show Material materials with Conductividad térmica of 22.3 W/(m·K)

600.0 °C

23.3 W/(m·K)

Show Material materials with Conductividad térmica of 23.3 W/(m·K)

700.0 °C

24.1 W/(m·K)

Show Material materials with Conductividad térmica of 24.1 W/(m·K)

800.0 °C

25.5 W/(m·K)

Show Material materials with Conductividad térmica of 25.5 W/(m·K)

900.0 °C

26.9 W/(m·K)

Show Material materials with Conductividad térmica of 26.9 W/(m·K)

1000.0 °C

28.3 W/(m·K)

Show Material materials with Conductividad térmica of 28.3 W/(m·K)

Unlock all property charts

Difusividad térmica

20.0 °C

4.7 mm²/s

Show Material materials with Difusividad térmica of 4.7 mm²/s

100.0 °C

4.5 mm²/s

Show Material materials with Difusividad térmica of 4.5 mm²/s

200.0 °C

4.5 mm²/s

Show Material materials with Difusividad térmica of 4.5 mm²/s

300.0 °C

4.6 mm²/s

Show Material materials with Difusividad térmica of 4.6 mm²/s

400.0 °C

4.4 mm²/s

Show Material materials with Difusividad térmica of 4.4 mm²/s

500.0 °C

4.1 mm²/s

Show Material materials with Difusividad térmica of 4.1 mm²/s

600.0 °C

3.6 mm²/s

Show Material materials with Difusividad térmica of 3.6 mm²/s

Unlock all property charts

Temperatura de fusión

1425 - 1530 °C

Show Material materials with Temperatura de fusión of 1425 - 1530 °C

Typical for Ferritic Stainless Steel

Temperatura máx. de funcionamiento, largo

-10 - 280 °C

Show Material materials with Temperatura máx. de funcionamiento, largo of -10 - 280 °C

Eléctrico

PropertyTemperatureValue

Resistividad eléctrica

20.0 °C

6E-7 - 9.06E-7 Ω·m

Show Material materials with Resistividad eléctrica of 6E-7 - 9.06E-7 Ω·m

100.0 °C

9.42E-7 Ω·m

Show Material materials with Resistividad eléctrica of 9.42E-7 Ω·m

200.0 °C

9.87E-7 Ω·m

Show Material materials with Resistividad eléctrica of 9.87E-7 Ω·m

300.0 °C

1.03E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.03E-6 Ω·m

400.0 °C

1.08E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.08E-6 Ω·m

500.0 °C

1.12E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.12E-6 Ω·m

600.0 °C

1.18E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.18E-6 Ω·m

700.0 °C

1.22E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.22E-6 Ω·m

800.0 °C

1.24E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.24E-6 Ω·m

900.0 °C

1.26E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.26E-6 Ω·m

1000.0 °C

1.27E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.27E-6 Ω·m

Unlock all property charts

Chemical properties

PropertyValue

Azufre

0.015 %

Show Material materials with Azufre of 0.015 %

Carbono

0.05 %

Show Material materials with Carbono of 0.05 %

Cromo

16 - 18 %

Show Material materials with Cromo of 16 - 18 %

Fósforo

0.04 %

Show Material materials with Fósforo of 0.04 %

Manganeso

1 %

Show Material materials with Manganeso of 1 %

Silicona

1 %

Show Material materials with Silicona of 1 %

Titanio

0.8 %

Show Material materials with Titanio of 0.8 %