EN 10025-3 Grade S460NL normalized or normalized formed (+N)

Want to keep this datasheet? Save it now in your required format

Description

The alloyed, normalised/normalising rolled high grade steel S460NL is a weldable fine-grained steel with a min. yield point of 460 N/mm². The steel is applicated in normalized condition for several types of welded constructions such as fixed and movable storage container, high-pressure pipes, bridge and load-bearing constructions etc. Cold forming: Suitability for cold bending, folding, cold flanging or cold welting has to be agreed. For sheet, strip and wide flat steel in thermo mechanical rolled condition, for nominal thickness (s) up to 16 mm can be warranted the following bending radius values: longitudinal: 5 x s transverse: 4 x s Sheet and strip of nominal thicknesses < 8 mm for cold forming of sections is available on arrangement (e.g. for production of hollow sections). Requirements regarding hot dip zinc coating by arrangement.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Comment
Densidad	7.8 g/cm³ Show Material materials with Densidad of 7.8 g/cm³	Typical for Steel

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coeficiente de Poisson		0.3 [-] Show Material materials with Coeficiente de Poisson of 0.3 [-]				Typical for Steel
Dureza Brinell		251 [-] Show Material materials with Dureza Brinell of 251 [-]				Predicted Value, Transverse
Elongación		15.6 % Show Material materials with Elongación of 15.6 %				Predicted Value, A80
		15.7 % Show Material materials with Elongación of 15.7 %				Predicted Value, A200
		17.5 % Show Material materials with Elongación of 17.5 %				Predicted Value, Transverse
		18.3 % Show Material materials with Elongación of 18.3 %				Predicted Value, A80 Transverse
		20.9 % Show Material materials with Elongación of 20.9 %				Predicted Value, A5
		23.4 % Show Material materials with Elongación of 23.4 %				Predicted Value, A50
	20 °C	16 % Show Material materials with Elongación of 16 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	17 % Show Material materials with Elongación of 17 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Estricción		43.8 % Show Material materials with Estricción of 43.8 %				Predicted Value, Transverse
		51.5 % Show Material materials with Estricción of 51.5 %				Predicted Value
Límite elástico		259.8 MPa Show Material materials with Límite elástico of 259.8 MPa				Predicted Value, RP1
		319.7 MPa Show Material materials with Límite elástico of 319.7 MPa				Predicted Value, RP1 Transverse
		408.3 MPa Show Material materials with Límite elástico of 408.3 MPa				Predicted Value, Transverse
		429.3 MPa Show Material materials with Límite elástico of 429.3 MPa				Predicted Value, RP02
		469.9 MPa Show Material materials with Límite elástico of 469.9 MPa				Predicted Value, RP02 Transverse
		506.8 MPa Show Material materials with Límite elástico of 506.8 MPa				Predicted Value, RP002
		531.5 MPa Show Material materials with Límite elástico of 531.5 MPa				Predicted Value, RP05
	20 °C	370 MPa Show Material materials with Límite elástico of 370 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	380 MPa Show Material materials with Límite elástico of 380 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	400 MPa Show Material materials with Límite elástico of 400 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
	20 °C	410 MPa Show Material materials with Límite elástico of 410 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
	20 °C	430 MPa Show Material materials with Límite elástico of 430 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
	20 °C	440 MPa Show Material materials with Límite elástico of 440 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
	20 °C	460 MPa Show Material materials with Límite elástico of 460 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Módulo de cizallamiento		80.2 GPa Show Material materials with Módulo de cizallamiento of 80.2 GPa				Predicted Value
Módulo elástico		190 - 210 GPa Show Material materials with Módulo elástico of 190 - 210 GPa				Typical for Steel
Resistencia a la tracción	20 °C	510 - 720 MPa Show Material materials with Resistencia a la tracción of 510 - 720 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	510 - 700 MPa Show Material materials with Resistencia a la tracción of 510 - 700 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	510 - 690 MPa Show Material materials with Resistencia a la tracción of 510 - 690 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	520 - 690 MPa Show Material materials with Resistencia a la tracción of 520 - 690 MPa	normalized or normalized formed (+N)	EN 10113-2, EN 10025-3	Sheet, Flat
	20 °C	530 - 720 MPa Show Material materials with Resistencia a la tracción of 530 - 720 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	530 - 700 MPa Show Material materials with Resistencia a la tracción of 530 - 700 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	530 - 690 MPa Show Material materials with Resistencia a la tracción of 530 - 690 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	550 - 720 MPa Show Material materials with Resistencia a la tracción of 550 - 720 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
	20 °C	550 - 700 MPa Show Material materials with Resistencia a la tracción of 550 - 700 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	550 - 690 MPa Show Material materials with Resistencia a la tracción of 550 - 690 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
Resistencia al cizallamiento		527.9 MPa Show Material materials with Resistencia al cizallamiento of 527.9 MPa				Predicted Value

Aplicaciones térmicas

Property	Value	Comment
Calor específico	454.3 J/(kg·K) Show Material materials with Calor específico of 454.3 J/(kg·K)	Predicted Value
Coeficiente de dilatación térmica	11.83 1/K Show Material materials with Coeficiente de dilatación térmica of 11.83 1/K	Predicted Value
Conductividad térmica	38.26 W/(m·K) Show Material materials with Conductividad térmica of 38.26 W/(m·K)	Predicted Value

Eléctrico

Property	Value	Comment
Conductividad eléctrica	5 S/m Show Material materials with Conductividad eléctrica of 5 S/m	Predicted Value
Resistividad eléctrica	35 Ω·m Show Material materials with Resistividad eléctrica of 35 Ω·m	Predicted Value

Chemical properties

Property	Value	Condition	Related Standards	Shape
Aluminio	0.02 % Show Material materials with Aluminio of 0.02 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Azufre	0.02 % Show Material materials with Azufre of 0.02 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	0.025 % Show Material materials with Azufre of 0.025 %	normalized or normalized formed (+N)	EN 10113-2, EN 10025-3	Sheet, Strip, Bar, Flat
Carbono	0.2 % Show Material materials with Carbono of 0.2 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Cobre	0.55 % Show Material materials with Cobre of 0.55 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	0.7 % Show Material materials with Cobre of 0.7 %	normalized or normalized formed (+N)	EN 10113-2, EN 10025-3	Sheet, Strip, Bar, Flat
Cromo	0.3 % Show Material materials with Cromo of 0.3 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Fósforo	0.025 % Show Material materials with Fósforo of 0.025 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	0.03 % Show Material materials with Fósforo of 0.03 %	normalized or normalized formed (+N)	EN 10113-2, EN 10025-3	Sheet, Strip, Bar, Flat
Manganeso	1 - 1.7 % Show Material materials with Manganeso of 1 - 1.7 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Molibdeno	0.1 % Show Material materials with Molibdeno of 0.1 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Niobio	0.05 % Show Material materials with Niobio of 0.05 %	normalized or normalized formed (+N)	EN 10113-2, EN 10025-3	Sheet, Strip, Bar, Flat
	0.2 % Show Material materials with Niobio of 0.2 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
Nitrógeno	0.025 % Show Material materials with Nitrógeno of 0.025 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Níquel	0.8 % Show Material materials with Níquel of 0.8 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Silicona	0.6 % Show Material materials with Silicona of 0.6 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Titanio	0.03 % Show Material materials with Titanio of 0.03 %	normalized or normalized formed (+N)	EN 10113-2, EN 10025-3	Sheet, Strip, Bar, Flat
	0.05 % Show Material materials with Titanio of 0.05 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
Vanadio	0.05 % Show Material materials with Vanadio of 0.05 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	0.2 % Show Material materials with Vanadio of 0.2 %	normalized or normalized formed (+N)	EN 10113-2, EN 10025-3	Sheet, Strip, Bar, Flat

Technological properties

Property
Supplier Disclaimer	The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.

Looking for suppliers of this material? Click to see 13 supplier of EN 10025-3 Grade S460NL normalized or normalized formed (+N) on Matmatch

EN 10025-3 Grade S460NL normalized or normalized formed (+N)

Description

Related Standards

Equivalent Materials

Ashby charts

There are 10 other suppliers for this grade.

Preview all suppliers

Lectura sugerida

Propiedades