DIN 17440 Grade X14CrMoS17 soft annealed (+A)

Want to keep this datasheet? Save it now in your required format

Description

The material X14CrMoS17 is used acc. DIN 17440 : 1996-09 for rods (for pressure vessels), forgings and drawn wire. For the application acc. DIN 17440 : 1985-07 (X 12 CrMoS 17) resp. acc. DIN EN 10088-1,-2,-3 : 1995-08 (X14CrMoS17) applies: stainless free-cutting steel used in the quenched and tempered condition for construction parts like screws, nuts, fittings, axles, bolts, spindles in water, steam and weak alkaline and neutral media as well as for solenoid valves. Because of the S-content the corrosion resistance is comparable to an steel with 13% Cr.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	7.65 - 7.7 g/cm³ Show Material materials with Densidad of 7.65 - 7.7 g/cm³

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.3 [-] Show Material materials with Coeficiente de Poisson of 0.3 [-]	Typical for Ferritic Stainless Steel
Dureza Brinell	20.0 °C	230 [-] Show Material materials with Dureza Brinell of 230 [-]
Dureza Vickers	20.0 °C	230 [-] Show Material materials with Dureza Vickers of 230 [-]
Elongación	20.0 °C	16 % Show Material materials with Elongación of 16 %
Módulo de cizallamiento	23.0 °C	77 GPa Show Material materials with Módulo de cizallamiento of 77 GPa	Typical for Ferritic Stainless Steel
Módulo elástico	20.0 °C	196 - 216 GPa Show Material materials with Módulo elástico of 196 - 216 GPa
	100.0 °C	213 GPa Show Material materials with Módulo elástico of 213 GPa
	200.0 °C	207 GPa Show Material materials with Módulo elástico of 207 GPa
	300.0 °C	200 GPa Show Material materials with Módulo elástico of 200 GPa
	400.0 °C	192 GPa Show Material materials with Módulo elástico of 192 GPa

Resistencia a la tracción	20.0 °C	540 - 740 MPa Show Material materials with Resistencia a la tracción of 540 - 740 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	20.0 °C	450 - 460 J/(kg·K) Show Material materials with Calor específico of 450 - 460 J/(kg·K)
	100.0 °C	482 J/(kg·K) Show Material materials with Calor específico of 482 J/(kg·K)
	200.0 °C	506 J/(kg·K) Show Material materials with Calor específico of 506 J/(kg·K)
	300.0 °C	525 J/(kg·K) Show Material materials with Calor específico of 525 J/(kg·K)
	400.0 °C	547 J/(kg·K) Show Material materials with Calor específico of 547 J/(kg·K)
	500.0 °C	576 J/(kg·K) Show Material materials with Calor específico of 576 J/(kg·K)
	600.0 °C	616 J/(kg·K) Show Material materials with Calor específico of 616 J/(kg·K)
	Unlock all property charts
Coeficiente de dilatación térmica	-100.0 °C	9.2E-6 1/K Show Material materials with Coeficiente de dilatación térmica of 9.2E-6 1/K
	20.0 °C	9.9E-6 1/K Show Material materials with Coeficiente de dilatación térmica of 9.9E-6 1/K
	100.0 °C	1E-5 - 1.03E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1E-5 - 1.03E-5 1/K
	200.0 °C	1.05E-5 - 1.08E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.05E-5 - 1.08E-5 1/K
	300.0 °C	1.05E-5 - 1.12E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.05E-5 - 1.12E-5 1/K
	400.0 °C	1.05E-5 - 1.16E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.05E-5 - 1.16E-5 1/K
	500.0 °C	1.1E-5 - 1.19E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.1E-5 - 1.19E-5 1/K
	600.0 °C	1.21E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.21E-5 1/K
	700.0 °C	1.24E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.24E-5 1/K
	800.0 °C	1.29E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.29E-5 1/K
	900.0 °C	1.34E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.34E-5 1/K
	1000.0 °C	1.39E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.39E-5 1/K
	Unlock all property charts
Conductividad térmica	20.0 °C	19.6 - 25 W/(m·K) Show Material materials with Conductividad térmica of 19.6 - 25 W/(m·K)
Difusividad térmica	20.0 °C	5.7 mm²/s Show Material materials with Difusividad térmica of 5.7 mm²/s
Temperatura de fusión		1425 - 1530 °C Show Material materials with Temperatura de fusión of 1425 - 1530 °C	Typical for Ferritic Stainless Steel

Eléctrico

Property	Temperature	Value
Resistividad eléctrica	20.0 °C	6.17E-7 - 7E-7 Ω·m Show Material materials with Resistividad eléctrica of 6.17E-7 - 7E-7 Ω·m

Chemical properties

Property	Value
Azufre	0.15 - 0.35 % Show Material materials with Azufre of 0.15 - 0.35 %
Carbono	0.1 - 0.17 % Show Material materials with Carbono of 0.1 - 0.17 %
Cromo	15.5 - 17.5 % Show Material materials with Cromo of 15.5 - 17.5 %
Fósforo	0.04 % Show Material materials with Fósforo of 0.04 %
Manganeso	1.5 % Show Material materials with Manganeso of 1.5 %
Molibdeno	0.2 - 0.6 % Show Material materials with Molibdeno of 0.2 - 0.6 %
Silicona	1 % Show Material materials with Silicona of 1 %

Looking for suppliers of this material? Click to see 7 supplier of DIN 17440 Grade X14CrMoS17 soft annealed (+A) on Matmatch

DIN 17440 Grade X14CrMoS17 soft annealed (+A)

Description

Related Standards

Equivalent Materials

Ashby charts

There are 4 other suppliers for this grade.

Preview all suppliers

Lectura sugerida

Propiedades