EN 1652 Grade CuNi30Mn1Fe H080

Want to keep this datasheet? Save it now in your required format

Description

CuNi30Mn1Fe (CW354H) is comparable to CuNi30Mn1Fe, mat. no. 2.0882, acc. to DIN 17664 : 1983-12. To the comparable DIN-mark applies: The material shows favorable specific strength values also at endurance loading and increased temperatures. Thermal conductivity of pure copper is strongly reduced by Ni, the electrical resistance strongly increases according to the Ni-content. Fe-addition increases the corrosion resistance. CuNi30Mn1Fe is resistant to water and seawater, coolant and solvent, alkaline substances, alkaline saline solutions and non-oxidizing acids. warm forming: good cold forming: good machinability: moderately hard soldering: very good soft soldering: very good gas-shielded welding: very good burnishing: good Application: For seawater pipilines, tubes and plates for all types of tubular heat-exchanger (condenser, cooler, seawater evaporators, high pressure feeder water heater) on ships, in power plants, in petroleum processing an in chemical factories as well as in saltern plants. The material is established for condenser in ammoniac steam.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Lectura sugerida

Properties of Copper

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	8.9 g/cm³ Show Material materials with Densidad of 8.9 g/cm³

Mecánica

Property	Temperature	Value
Dureza Brinell	20.0 °C	80 - 110 [-] Show Material materials with Dureza Brinell of 80 - 110 [-]
Dureza Vickers	20.0 °C	80 - 120 [-] Show Material materials with Dureza Vickers of 80 - 120 [-]
Elongación	20.0 °C	20 % Show Material materials with Elongación of 20 %
Límite elástico Rp 0,2	20.0 °C	100 - 120 MPa Show Material materials with Límite elástico Rp 0,2 of 100 - 120 MPa
Límite elástico Rp 1,0	20.0 °C	140 MPa Show Material materials with Límite elástico Rp 1,0 of 140 MPa
	50.0 °C	140 MPa Show Material materials with Límite elástico Rp 1,0 of 140 MPa
	100.0 °C	130 MPa Show Material materials with Límite elástico Rp 1,0 of 130 MPa
	150.0 °C	126 MPa Show Material materials with Límite elástico Rp 1,0 of 126 MPa
	200.0 °C	123 MPa Show Material materials with Límite elástico Rp 1,0 of 123 MPa
	250.0 °C	120 MPa Show Material materials with Límite elástico Rp 1,0 of 120 MPa
	300.0 °C	117 MPa Show Material materials with Límite elástico Rp 1,0 of 117 MPa
	350.0 °C	112 MPa Show Material materials with Límite elástico Rp 1,0 of 112 MPa

Módulo elástico	-253.0 °C	161 GPa Show Material materials with Módulo elástico of 161 GPa
	-195.0 °C	158 GPa Show Material materials with Módulo elástico of 158 GPa
	-100.0 °C	155 GPa Show Material materials with Módulo elástico of 155 GPa
	20.0 °C	150 GPa Show Material materials with Módulo elástico of 150 GPa
	50.0 °C	150 GPa Show Material materials with Módulo elástico of 150 GPa
	100.0 °C	149 GPa Show Material materials with Módulo elástico of 149 GPa
	150.0 °C	148 GPa Show Material materials with Módulo elástico of 148 GPa
	200.0 °C	146 GPa Show Material materials with Módulo elástico of 146 GPa
	250.0 °C	144 GPa Show Material materials with Módulo elástico of 144 GPa
	300.0 °C	142 GPa Show Material materials with Módulo elástico of 142 GPa
	350.0 °C	141 GPa Show Material materials with Módulo elástico of 141 GPa
	Unlock all property charts
Resistencia a la tracción	20.0 °C	310 MPa Show Material materials with Resistencia a la tracción of 310 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	375 - 398 J/(kg·K) Show Material materials with Calor específico of 375 - 398 J/(kg·K)	Typical for Wrought Copper Nickel Grade
Coeficiente de dilatación térmica	300.0 °C	1.6E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.6E-5 1/K
Conductividad térmica	20.0 °C	29 W/(m·K) Show Material materials with Conductividad térmica of 29 W/(m·K)
Temperatura de fusión		915 - 1240 °C Show Material materials with Temperatura de fusión of 915 - 1240 °C	Typical for Wrought Copper Nickel Grade

Chemical properties

Property	Value
Azufre	0.05 % Show Material materials with Azufre of 0.05 %
Carbono	0.05 % Show Material materials with Carbono of 0.05 %
Cobalto	0.1 % Show Material materials with Cobalto of 0.1 %
Estaño	0.05 % Show Material materials with Estaño of 0.05 %
Fósforo	0.02 % Show Material materials with Fósforo of 0.02 %
Hierro	0.4 - 1 % Show Material materials with Hierro of 0.4 - 1 %
Manganeso	0.5 - 1.5 % Show Material materials with Manganeso of 0.5 - 1.5 %
Níquel	30 - 32 % Show Material materials with Níquel of 30 - 32 %
Plomo	0.02 % Show Material materials with Plomo of 0.02 %
Zinc	0.5 % Show Material materials with Zinc of 0.5 %

Looking for suppliers of this material? Click to see 4 supplier of EN 1652 Grade CuNi30Mn1Fe H080 on Matmatch