RADILON DT RV500RKC2 306 BK

Nombres alternativos y comerciales
PA612-GF50

Want to keep this datasheet? Save it now in your required format

Description

PA612 50% glass fibre reinforced injection moulding grade. Heat stabilized, improved flowability. Black colour.

Suitable for parts requiring very high stiffness and high mechanical resistance in direct contact with drinking water and food. Excellent dimensional stability, improved hydrolytic stability and chemical resistance to disinfectants. Product developed for applications in civil and industrial water management as well as appliances.

Equivalent Materials

PA612-GF50

Los datos sobre este material han sido proporcionados por Radici Group.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

RADICIGROUP HIGH PERFORMANCE POLYMERS

FABRICANTE

Additional services:

CAE Service: Customized technical support contributing to the success of innovative projects, including metal replacement applications, realized using RADILON®, RADITECK®, RADISTRONG®, RADIFLAM® and RADITER® engineering plastics. This is what RadiciGroup High Performance Polymers can offer its customers, thanks to its state-of-the-art computer-aided engineering (CAE) virtual simulation tools and the experience of its technical specialists.

Materiales de este proveedor

RADILON A CP300K 333 BK

RADILON AESTUS T1 RV300FC 306K BK

TORZEN Marathon G3500XHL BK20

RADILON NeXTreme RV500HHR 3800 BK

RADITER B RV300 100 NT

Ver todos los materiales de este proveedor

Casos de uso

Webinar: Metal Replacement with Engineering Polymers

Propiedades

General

Property	Temperature	Value	Thickness	Testing Standard	Condition	Comment
Absorción de agua		1.5 % Show Supplier Material materials with Absorción de agua of 1.5 %	2 mm	ISO 62		immersion at 23°C
Densidad		1.51 g/cm³ Show Supplier Material materials with Densidad of 1.51 g/cm³		ISO 1183	dry
Moisture absorption	23 °C	0.6 % Show Supplier Material materials with Moisture absorption of 0.6 %	2 mm	ISO 62	50%RH

Mecánica

Property	Temperature	Value	Condition	Testing Standard	Comment
Elongación		3 % Show Supplier Material materials with Elongación of 3 %	dry	ISO 527-2/1A	5mm/min
		3.2 % Show Supplier Material materials with Elongación of 3.2 %	50%RH	ISO 527-2/1A	5mm/min
Módulo de flexión		11.9 GPa Show Supplier Material materials with Módulo de flexión of 11.9 GPa	50%RH	ISO 178	2mm/min
		13 GPa Show Supplier Material materials with Módulo de flexión of 13 GPa	dry	ISO 178	2mm/min
Módulo elástico		13.4 GPa Show Supplier Material materials with Módulo elástico of 13.4 GPa	50%RH	ISO 527-2/1A	1mm/min
		14.9 GPa Show Supplier Material materials with Módulo elástico of 14.9 GPa	dry	ISO 527-2/1A	1mm/min
Resistencia a la flexión		265 MPa Show Supplier Material materials with Resistencia a la flexión of 265 MPa	50%RH	ISO 178	2mm/min
		295 MPa Show Supplier Material materials with Resistencia a la flexión of 295 MPa	dry	ISO 178	2mm/min
Resistencia a la tracción		170 MPa Show Supplier Material materials with Resistencia a la tracción of 170 MPa	50%RH	ISO 527-2/1A	5mm/min
		190 MPa Show Supplier Material materials with Resistencia a la tracción of 190 MPa	dry	ISO 527-2/1A	5mm/min
Resistencia al choque, ensayo Charpy entallado	-30 °C	14 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 14 kJ/m²	dry	ISO 179/1eA
	23 °C	15 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 15 kJ/m²	dry	ISO 179/1eA
	23 °C	17 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 17 kJ/m²	50%RH	ISO 179/1eA
Resistencia al choque, ensayo Charpy no entallado		80 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 80 kJ/m²	dry	ISO 179/1eU	-30°C
		95 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 95 kJ/m²	dry	ISO 179/1eU	23°C
		100 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 100 kJ/m²	50%RH	ISO 179/1eU	23°C

Aplicaciones térmicas

Property	Value	Testing Standard	Comment
Temperatura de flexión bajo carga	200 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 200 °C	ISO 75/2Af	1.00E+12mm
Temperatura de fusión	220 °C Show Supplier Material materials with Temperatura de fusión of 220 °C	ISO 11357-1/-3	10°C/min
Inflamabilidad	Thickness tested (mm): 1.6, Class: HB, Standard: UL 94 \| Automotive Interior Flammability(mm/min): 0 ,method: ISO 3795 and thickness tested (mm): 3

Eléctrico

Property	Value	Condition	Testing Standard	Comment
Volume resistivity	1e+11 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+11 Ω·cm	50%RH	IEC 60093	500V
	1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm	dry	IEC 60093	500V

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	0.2 % Show Supplier Material materials with Contracción of 0.2 %	280/90/60*	ISO 294-4	*Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa]
	0.6 % Show Supplier Material materials with Contracción of 0.6 %	280/90/60*	ISO 294-4	*Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa], Transverse

Technological properties

Property
Additives	Release agent
Certifications	Food Contact, Drinking Water, RoHS 2011/65/UE
Color	Black
Features	Hydrolysis Resistance, Heat Stabilized
Fillers	50% Glass Fiber
Processing methods	Injection Molding