General
Property | Value | Condition | Related Standards |
---|---|---|---|
Density | 2.65 g/cm³ Show Material materials with Density of 2.65 g/cm³ | H19 | EN 573-3, EN 485, EN 541 |
Mechanical
Property | Value | Condition | Related Standards | Comment |
---|---|---|---|---|
Elastic modulus | 70.0 GPa Show Material materials with Elastic modulus of 70.0 GPa | H19 | EN 573-3, EN 485, EN 541 | |
Hardness, Brinell | 114.0 [-] Show Material materials with Hardness, Brinell of 114.0 [-] | H19 | EN 573-3, EN 485 | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | ||
Poisson's ratio | 0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] | Typical for Wrought 5000 Series Aluminium | ||
Shear modulus | 26.0 - 26.5 GPa Show Material materials with Shear modulus of 26.0 - 26.5 GPa | Typical for Wrought 5000 Series Aluminium | ||
Tensile strength | 370.0 - 430.0 MPa Show Material materials with Tensile strength of 370.0 - 430.0 MPa | H19 | EN 573-3, EN 541 | |
380.0 MPa Show Material materials with Tensile strength of 380.0 MPa | H19 | EN 573-3, EN 485 |
Thermal
Property | Temperature | Value | Condition | Related Standards | Comment |
---|---|---|---|---|---|
Coefficient of thermal expansion | 20 °C | 2.3199999999999998e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.3199999999999998e-05 1/K | H19 | EN 573-3, EN 485, EN 541 | |
100 °C | 2.3199999999999998e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.3199999999999998e-05 1/K | H19 | EN 573-3, EN 485, EN 541 | ||
Max service temperature | 150.0 °C Show Material materials with Max service temperature of 150.0 °C | Typical for Wrought 5000 Series Aluminium | |||
Melting point | 577.0 - 638.0 °C Show Material materials with Melting point of 577.0 - 638.0 °C | H19 | EN 573-3, EN 485, EN 541 | ||
Specific heat capacity | 879.0 - 963.0 J/(kg·K) Show Material materials with Specific heat capacity of 879.0 - 963.0 J/(kg·K) | Typical for Wrought 5000 Series Aluminium | |||
Thermal conductivity | 123 W/(m·K) Show Material materials with Thermal conductivity of 123 W/(m·K) | H19 | EN 573-3, EN 485, EN 541 |
Electrical
Property | Value | Condition | Related Standards |
---|---|---|---|
Electrical conductivity | 18000000.0 S/m Show Material materials with Electrical conductivity of 18000000.0 S/m | H19 | EN 573-3, EN 485, EN 541 |
Electrical resistivity | 5.56e-08 Ω·m Show Material materials with Electrical resistivity of 5.56e-08 Ω·m | H19 | EN 573-3, EN 485, EN 541 |
Chemical properties
Property | Value | Condition | Related Standards |
---|---|---|---|
Chromium | 0.1 % Show Material materials with Chromium of 0.1 % | H19 | EN 573-3, EN 485, EN 541 |
Copper | 0.15 % Show Material materials with Copper of 0.15 % | H19 | EN 573-3, EN 485, EN 541 |
Iron | 0.35 % Show Material materials with Iron of 0.35 % | H19 | EN 573-3, EN 485, EN 541 |
Magnesium | 4.0 - 5.0 % Show Material materials with Magnesium of 4.0 - 5.0 % | H19 | EN 573-3, EN 485, EN 541 |
Manganese | 0.2 - 0.5 % Show Material materials with Manganese of 0.2 - 0.5 % | H19 | EN 573-3, EN 485, EN 541 |
Silicon | 0.2 % Show Material materials with Silicon of 0.2 % | H19 | EN 573-3, EN 485, EN 541 |
Titanium | 0.1 % Show Material materials with Titanium of 0.1 % | H19 | EN 573-3, EN 485, EN 541 |
Zinc | 0.25 % Show Material materials with Zinc of 0.25 % | H19 | EN 573-3, EN 485, EN 541 |
Technological properties
Property | ||
---|---|---|
Workability | Good workability. |