DD12 AM FCE

Want to keep this datasheet? Save it now in your required format

Description

DD12 AM FCE for cold forming and deep drawing applications are characterised by guaranteed maximum yield and tensile strength and minimum elongation.

Related Standards

Equivalent Materials

This material data has been provided by ArcelorMittal.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Value	Comment
Carbon equivalent (CEV)	0.18 [-] Show Supplier Material materials with Carbon equivalent (CEV) of 0.18 [-]	max.

Dimension

Property	Value
Dimensions	Please feel free to check the figure on the right side of the material page for more details.

Mechanical

Property	Value	Comment
Elongation	25 % Show Supplier Material materials with Elongation of 25 %	min. \| for thickness 1.5-2 mm \| Transverse, A80
	26 % Show Supplier Material materials with Elongation of 26 %	min. \| for thickness 2-3 mm \| Transverse, A80
	30 % Show Supplier Material materials with Elongation of 30 %	min. A5.65√So \| for thickness 3-15 mm \| Transverse
Tensile strength	290 - 420 MPa Show Supplier Material materials with Tensile strength of 290 - 420 MPa	for thickness 1.5-15 mm \| Transverse
Yield strength	200 - 340 MPa Show Supplier Material materials with Yield strength of 200 - 340 MPa	for thickness 1.5-2 mm \| Transverse
	200 - 320 MPa Show Supplier Material materials with Yield strength of 200 - 320 MPa	for thickness 2-15 mm \| Transverse

Chemical properties

Property	Value	Comment
Aluminium	0.02 % Show Supplier Material materials with Aluminium of 0.02 %	max.
Carbon	0.02 - 0.1 % Show Supplier Material materials with Carbon of 0.02 - 0.1 %
Manganese	0.45 % Show Supplier Material materials with Manganese of 0.45 %	max.
Phosphorus	0.03 % Show Supplier Material materials with Phosphorus of 0.03 %	max.
Silicon	0.03 % Show Supplier Material materials with Silicon of 0.03 %	max.
Sulfur	0.03 % Show Supplier Material materials with Sulfur of 0.03 %	max.

Technological properties

Property
Application areas	This is widely used for bending and drawing applications in general industry, building, the automotive industry and related sectors (e.g. oil sumps for industrial vehicles etc). ArcelorMittal's steels for cold forming and deep drawing applications display good or even excellent performance in all types of deep drawing processes, enabling the production of complex parts. Uncoated hot rolled steels for bending and deep drawing applications are suitable under certain conditions for food contact, as specified in the Regulation (EC) No. 1935/2004 and French standard NF A 36-714. Please contact us for further information on this subject.
Coating	Galvanisation: Class 1
Other	ArcelorMittal provides guarantees for thicknesses greater than 11 mm.
Welding	The weldability (spot and arc welding) of ArcelorMittal's hot rolled steels for cold forming and deep drawing is equivalent to that of cold rolled steels of corresponding grades.