S200 AM FCE

Want to keep this datasheet? Save it now in your required format

Description

S200 AM FCE is structural forming grade offering superior strength compared with standard deep drawing grades. Furthermore, its mechanical properties meet very narrow tolerance limits.

Related Standards

EN 10111

Equivalent Materials

EN DD11

This material data has been provided by ArcelorMittal.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

Dimension

Property	Value
Dimensions	Please feel free to check the figure on the right side of the material page for more details.

Mechanical

Property	Value	Comment
Bend allowance	1 [-] Show Supplier Material materials with Bend allowance of 1 [-]	min. \| Transverse \| for thickness 1.5-16 mm
Elongation	23 % Show Supplier Material materials with Elongation of 23 %	min. \| for thickness 1.5-2 mm \| Transverse, A80
	24 % Show Supplier Material materials with Elongation of 24 %	min. \| for thickness 2-3 mm \| Transverse, A80
	28 % Show Supplier Material materials with Elongation of 28 %	min. A5.65√So \| for thickness 3-16 mm
Tensile strength	270 - 440 MPa Show Supplier Material materials with Tensile strength of 270 - 440 MPa	for thickness 1.5-16 mm \| Transverse
Yield strength	200 - 360 MPa Show Supplier Material materials with Yield strength of 200 - 360 MPa	for thickness 1.5-2 mm \| Transverse
	200 - 340 MPa Show Supplier Material materials with Yield strength of 200 - 340 MPa	for thickness 2-16 mm \| Transverse

Chemical properties

Property	Value	Comment
Carbon	0.02 - 0.1 % Show Supplier Material materials with Carbon of 0.02 - 0.1 %
Manganese	0.15 - 0.5 % Show Supplier Material materials with Manganese of 0.15 - 0.5 %
Phosphorus	0.03 % Show Supplier Material materials with Phosphorus of 0.03 %	max.
Silicon	0.03 % Show Supplier Material materials with Silicon of 0.03 %	max.
Sulfur	0.03 % Show Supplier Material materials with Sulfur of 0.03 %	max.

Technological properties

Property

Application areas

Structural forming grade which is well suited to applications requiring high reproducibility of processing performance (especially control of springback).

Chemical composition

The chemical properties given are based on cast analysis data.

Coating

Galvanisation: Class 1