S240D AM FCE

Want to keep this datasheet? Save it now in your required format

Description

S240D AM FCE is structural forming grade offering superior strength compared with standard deep drawing grades. Furthermore, its mechanical properties meet very narrow tolerance limits.

Related Standards

Equivalent Materials

This material data has been provided by ArcelorMittal.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Value	Comment
Carbon equivalent (CEV)	0.18 [-] Show Supplier Material materials with Carbon equivalent (CEV) of 0.18 [-]	max.

Dimension

Property	Value
Dimensions	Please feel free to check the figure on the right side of the material page for more details.

Mechanical

Property	Temperature	Value	Comment
Charpy impact energy	20 °C	27 J Show Supplier Material materials with Charpy impact energy of 27 J	min. \| for thickness 1.5-20 mm
Elongation		23 % Show Supplier Material materials with Elongation of 23 %	min. \| for thickness 1.5-2 mm \| Transverse, A80
		24 % Show Supplier Material materials with Elongation of 24 %	min. \| for thickness 2-3 mm \| Transverse, A80
		28 % Show Supplier Material materials with Elongation of 28 %	min. A5.65√So \| for thickness 3-20 mm
Tensile strength		360 - 430 MPa Show Supplier Material materials with Tensile strength of 360 - 430 MPa	for thickness 1.5-20 mm \| Transverse
Yield strength		240 - 360 MPa Show Supplier Material materials with Yield strength of 240 - 360 MPa	for thickness 1.5-2 mm \| Transverse
		240 - 340 MPa Show Supplier Material materials with Yield strength of 240 - 340 MPa	for thickness 2-20 mm \| Transverse

Chemical properties

Property	Value	Comment
Aluminium	0.01 % Show Supplier Material materials with Aluminium of 0.01 %	min.
Carbon	0.02 - 0.12 % Show Supplier Material materials with Carbon of 0.02 - 0.12 %
Manganese	0.6 % Show Supplier Material materials with Manganese of 0.6 %	max.
Phosphorus	0.03 % Show Supplier Material materials with Phosphorus of 0.03 %	max.
Silicon	0.03 % Show Supplier Material materials with Silicon of 0.03 %	max.
Sulfur	0.03 % Show Supplier Material materials with Sulfur of 0.03 %	max.

Technological properties

Property

Application areas

Structural forming grade which is well suited to applications requiring high reproducibility of processing performance (especially control of springback). The S240D AM FCE grade is popular with Steel Service Centres, since it allows them to rationalise their supplies of deep drawable and structural steel. This grade is a versatile material for numerous applications in industry markets.

Chemical composition

The chemical properties given are based on cast analysis data.

Coating

Galvanisation: Class 1